Yamaha RX-A1030 offers multi-zone audio functionality, allowing you to enjoy different audio sources in separate rooms. Connect speakers to the EXTRA SP terminals and control playback in Zone2 using the included remote control. Easily switch between audio sources such as analog inputs, FM/AM radio, USB, and network streaming services. With HDMI connectivity, you can even watch BD/DVDs in another room by connecting a TV to the unit. Explore the full potential of your home audio setup with Yamaha RX-A1030's multi-zone capabilities.
Yamaha RX-A1030 offers multi-zone audio functionality, allowing you to enjoy different audio sources in separate rooms. Connect speakers to the EXTRA SP terminals and control playback in Zone2 using the included remote control. Easily switch between audio sources such as analog inputs, FM/AM radio, USB, and network streaming services. With HDMI connectivity, you can even watch BD/DVDs in another room by connecting a TV to the unit. Explore the full potential of your home audio setup with Yamaha RX-A1030's multi-zone capabilities.
1
RX-A1030
Quick Guide for Multi-zone and Remote Control Functions
What is the multi-zone function?
The multi-zone function allows you to play back different input sources in the room
where the unit is installed (main zone) and in another room (Zone2). For example, while
you are watching TV in the living room (main zone), another person can listen to radio in
the study room (Zone2).
Also, you can watch a BD/DVD in another room (Zone2) by connecting a TV to the unit
with HDMI.
This guide explains how to set up a Zone2 system for enjoying audio using the unit’s
internal amplifier.
For more information, refer to the Owner’s Manual in the supplied CD-ROM.
You can select the following input sources for Zone2:
• With the system explained in this guide, audio sources input from the HDMI or digital audio input jacks
cannot be output to Zone2.
• AirPlay is available in Zone2 only when Airplay playback is ongoing in the main zone.
Preparations
■ Connection overview
• For information on how to connect speakers or a TV in the main zone, refer to the Easy Setup Guide.
Multi-zone function
• Analog audio input
(AV 1–4, V-AUX, AUDIO 1–4, PHONO)
• TUNER (FM/AM radio)
• USB (including iPod)
• SERVER
•AirPlay
• Network streaming services
(available on some models)
Living room (main zone)
Study room (Zone2)
NETWORKDC OUT
5V
0.5A
( 3
NET
)
MONITOR OUT/
ZONE OUT
HDMI OUT
ARC
(ZONE OUT)
12
HDMI
(1 BD/DVD)
AV 1 AV 2 AV 3 AV 4 AV 5 AV 6 AV 7
TRIGGER
OUT
1
2
RS-232C
YPB PR
YPB PR
YPB PR
MONITOR OUT/ZONE OUT
IN OUT
AV 1
AV 3
REMOTE
COMPONENT VIDEO
A
AV 2
B
C
AV 4
D
AV OUT
R
L
AV 3 AV 4AV 2AV 1
(1 BD/DVD)
OPTICAL
4
OPTICAL
3
COAXIAL
2
COAXIAL
1
PHONO
GND
AC IN
FM
75Ω
ANTENNA
HD Radio
OPTICAL
1
2
AUDIO 4
MULTI CH INPUT
ZONE OUT
AUDIO 3AUDIO 2AUDIO 1
(2 TV)
CENTER
SUBWOOFER
ZONE 2FRONT
SURROUND SUR. BACK
SPEAKERS
CENTER FRONTSURROUND BACKSURROUND
BI–AMP
ZONE 2/F.PRESENCE/
R
5
COAXIAL
6
L R R RL L L
SINGLE
AM
(4 RADIO)
PRE OUT
SUBWOOFER
CENTER
FRONT
SURROUND SUR. BACK
(SINGLE)
EXTRA SP
12V 0.1A
HDMI IN
HDMI
OUT
AUDIO
OUT
R
L
R
L
L
R
L
R
Left Right
TV
Speakers
BD/DVD player
Playback device
(such as a CD player)
Already connected
(refer to Easy Setup Guide)
Zone2Main zone
The unit (rear)
Already connected
(refer to Easy Setup Guide)
U
2
■ Connections
1
Connect the speaker in Zone2 to the EXTRA SP terminals with
speaker cables.
The type of the speaker terminals varies depending on the model.
2
Connect the playback devices (such as CD players) in the main zone
to the analog stereo input jacks with stereo pin cables.
Only analog audio sources (including FM/AM radio), and USB and network
sources can be output to Zone2. To listen to the playback of an external device
in Zone2, you need to connect the device to the analog audio input jacks.
3
Connect the power cable to an AC wall outlet.
To operate the unit and external devices from Zone2
You can operate the unit and external devices from Zone2 using the supplied remote
control if you connect an infrared signal receiver/emitter to the unit’s REMOTE IN/OUT
jacks. For details, refer to the Owner's Manual in the supplied CD-ROM.
Caution
• Before connecting the speakers, remove the unit’s power cable from the AC wall outlet.
• Ensure that the core wires of the speaker cable do not touch each other or come into contact with the
unit’s metal areas. This may damage the unit or the speakers.
• Connect the speakers with the correct polarity.
BI–AMP
ZONE 2/F.PRESENCE/
R L
EXTRA SP
EXTRA SP terminals
Left
Speakers (Zone2)
Right
The unit (rear)
-
+
aa
b
d
c
BI–AMP
ZONE 2/F.PRESENCE/
R
L
EXTRA SP
+ (red)
- (black)
To connect speaker cables
AUDIO
OUT
R
L
R
L
L
R
L
R
Analog stereo input jacks
(such as AUDIO 1–4)
The unit (rear)
Playback device
(such as a CD player)
3
■ Zone2 setup
Use the supplied remote control to set the Zone2
function.
1
Turn on the unit and TV.
2
Switch the TV input to display video from
the unit.
3
Press ON SCREEN to display the
on-screen menu on the TV.
4
Use the cursor keys and ENTER to select
“Setup” → “Speaker” → “Manual Setup” →
“Power Amp Assign”.
5
Use the cursor keys to select
“7ch +1ZONE” and press ENTER.
6
Press ON SCREEN to exit from the
on-screen menu.
Controlling Zone2
Follow the procedure below to enable Zone2 output and
select an input source for Zone2.
1
Set MAIN/ZONE2 to “ZONE2”.
This changes the zone (main zone or Zone2)
that is controlled by the remote control.
2
Press RECEIVER z.
Each time you press the key, Zone2 is enabled
or disabled.
When Zone2 is enabled, “ZONE2” lights up in
the front display.
3
Use the following keys to select an input
source.
AV 1–4: AV 1–4 (AUDIO) jacks
V-AUX: VIDEO AUX (AUDIO) jacks (on the front
panel)
AUDIO 1–4: AUDIO 1–4 (AUDIO) jacks
PHONO: PHONO jacks
USB: USB jack (on the front panel)
NET: NETWORK jack (press repeatedly to
select a desired network source)
TUNER: FM/AM radio
• If you have made more than one audio connection for AV 1–4,
V-AUX or AUDIO 1–2, audio signals input to the unit from the
external device is determined according to the “Audio Select”
setting in the “Option” menu. For details, refer to the Owner’s
Manual in the supplied CD-ROM.
• You cannot select USB and network sources exclusively for
each zone. For example, if you select “SERVER” for Zone2
when “USB” is selected for the main zone, the input source for
the main zone also switches to “SERVER”.
4
Start playback on the external device or
select a radio station.
For details about the playback operation, refer to
the instruction manual for the external device or
Owner’s Manual on the supplied CD-ROM.
DISPLAYRETURN
ENTER
ON
SCREEN
OPTION
TOP MENU
POP-UP/MENU
DI
S
PLA
Y
RET
U
R
N
O
PTI
ON
T
O
P MEN
U
P
O
P-
U
P
/
MEN
U
ON SCREEN
ENTER
Cursor keys
PARTY HDMI OUT
TUNER
PHONO MULTI
MAIN
ZONE 2
SCENE
SOURCE
RECEIVER
AV
AUDIO
5 6 7
V-AUX
1234
12
34
USB NET
PARTY
H
DMI
OU
T
MULT
I
S
CEN
E
SOU
R
CE
RE
C
EIVER
5
6
7
AV 1–4
V-AUX
AUDIO 1–4
PHONO
USB
NET
TUNER
RECEIVER
MAIN/ZONE2
OUT
1
IN
OUT
2
VOLUME
MUTE
DRCADAPTIVE
3
ZONE
2
SBLPL SBRSB PR
SW1
SL
SW2SW
SR
PL
CL R
PR
STEREO
ENHANCER
SLEEP
HD
TUNED
PRE
AMP
PAR TY
ZONE
3
ZONE
4
HD
TAG
DOCK
SPIMP.-
Zone2:On
Lights up
© 2013 Yamaha Corporation Printed in Malaysia ZF81820
TV VOL TV CH
TV
INPUT
MUTE
CODE SET
90
10
ENT
MEMORY
5
687
12
34
MOVIE
ENHANCER
TUNING PRESET
BAND
DISPLAYRETURN
ENTER
ON
SCREEN
OPTION
TOP MENU
MUTE
PROGRAM
VOLUME
POP-UP/MENU
PURE DIRECT
STRAIGHT
INFO SLEEP
MUSIC
PARTY HDMI OUT
TUNER
PHONO MULTI
MAIN
ZONE 2
MODE
SCENE
4321
TVBD/DVD
NET
RADIO
SOURCE
RECEIVER
AV
AUDIO
5 6 7
V-AUX
1234
12
34
SUR. DECODE
USB NET
TV
MOVI
E
ENHAN
C
E
R
TU
NIN
G
PRE
S
E
T
BAND
D
ISPLAYRETUR
N
ENTE
R
O
N
SC
REEN
OPTIO
N
T
O
P MEN
U
MUTE
PR
OG
RAM
V
O
L
U
M
E
PO
P-
U
P
/
MEN
U
PU
RE DIRE
C
T
S
TRAI
GH
T
INF
O
S
LEEP
M
USI
C
PARTY
H
DMI
OU
T
TUNER
P
HONO MULT
I
MAIN
Z
O
NE
2
M
OD
E
S
CEN
E
4
3
2
1
TV
B
D
/
DV
D
NE
T
RAD
I
O
RE
C
EIVER
AV
A
UDI
O
5
6
7
V
-
AUX
1
2
3
4
1
2
3
4
SU
R. DE
CO
D
E
U
S
B
N
ET
TV
SOURCE
CODE SET
By registering the remote control code for your TV, you can operate it with the remote control of the unit.
For information on how to register remote control codes for other external devices, refer to the Owner’s Manual in the supplied CD-ROM.
Registering the remote control code
1
Use “Remote Control Code Search” in the supplied
CD-ROM to find your TV’s remote control code.
• If there are multiple remote control codes, register the first code in the list. If
that does not work, try the other codes.
2
Press CODE SET.
SOURCE blinks twice.
Perform each of the following steps within 1 minute.
Otherwise, the setting will be canceled. If this happens,
repeat from Step 2.
3
Press TV z.
4
Use the numeric keys to enter the 4-digit remote
control code.
Once the remote control code is successfully registered, SOURCE
blinks twice.
If it blinks six times, registration has failed. Repeat from Step 2.
TV operations
Once you have registered the remote control code for your TV, you
can control it using the TV operation keys, regardless of the input
source selected on the unit.
Controlling your TV with the remote control of the unit
TV operation keys
INPUT Switches the video inputs of the TV.
MUTE Mutes the audio output of the TV.
TV VOL Adjust the volume of the TV.
TV CH Switch the channels of the TV
TV z Turns on/off the TV.
Numeric keys
TV operation keys
-
1
-
2
-
3
-
4
Yamaha RX-A1030 offers multi-zone audio functionality, allowing you to enjoy different audio sources in separate rooms. Connect speakers to the EXTRA SP terminals and control playback in Zone2 using the included remote control. Easily switch between audio sources such as analog inputs, FM/AM radio, USB, and network streaming services. With HDMI connectivity, you can even watch BD/DVDs in another room by connecting a TV to the unit. Explore the full potential of your home audio setup with Yamaha RX-A1030's multi-zone capabilities.
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
Yamaha RX-A2020 Reference guide
-
Yamaha RX-A2030 User guide
-
Yamaha RX-V1081 Owner's manual
-
-
-
-
Yamaha RX-V1073 Owner's manual
-
-
Yamaha RX-A1050 Owner's manual
-
Yamaha RX-A1070 Owner's manual
