Aurora Multimedia ASP12H User manual

Brand: Aurora Multimedia

Model: ASP12H

Category: Video line amplifiers

Type: User manual



ASP-14H

1x4 HDMI 1.3

Distribution Amplifier

User Manual



Manual Number: 100816



~ 1 ~



SafetyandNotice

The ASP-14H 1x4 HDMI 1.3 Distribution Amplifier with EDID Manager has been tested for conformance to safety

regulations and requirements, and has been certified for international use. However, like all electronic equipments, the

ASP-14H should be used with care. Please read and follow the safety instructions to protect yourself from possible injury

and to minimize the risk of damage to the unit.

z Follow all instructions and warnings marked on this unit.

z Do not attempt to service this unit yourself, except where explained in this manual.

z Provide proper ventilation and air circulation and do not use near water.

z Keep objects that might damage the device and assure that the placement of this unit is on a stable surface.

z Use only the power adapter and power cords and connection cables designed for this unit.

z Do not use liquid or aerosol cleaners to clean this unit. Always unplug the power to the device before cleaning.

~ 2 ~

The ASP-14H 1x4 HDMI 1.3 Distribution Amplifier with EDID Manager provides the most robust,

cost effective and advanced HDMI 1.3 splitter solution in the market, by which the high definition video

and high quality audio can be transmitted to 4 different locations without losing quality. With automatic

EDID learning, the ASP-14H will effectively avoid HDMI compatibility issues and offer the best HDMI

support for HDMI splitters. It is compatible with PC resolutions up to 1920*1200@60Hz, 1080P, 2k and

also supports HDTV.

With 12-bit deep color video and high definition audio support, ASP-14H is suitable for high quality

A/V broadcasting, digital signage and education applications.

Features

z HDMI 1.3c and DVI 1.0 compliant

z HDCP 1.2 compliant

z 340MHz (up to 16 bit Y-U-V 444 supported @ 1080P)

z Video bandwidth: 10.2Gbps

z Front panel LED indicator shows the user the system & switching information

z Supports conversion of HDMI signaling to DVI

z Built-in Gain compensation and synchronization signal proofread technology

z Resolution up to 1080p or WUXGA [1920x1200@60]

z Automatic EDID learning

z Supports x.v.YCC, x.v.Color & Deep Color

z Supports CEC bypassing communication channel

z Supports Dolby Digital, DTS-HD and Dolby TrueHD audio formats

z Wall-mount housing design for easy installation

Automatic EDID learning will detect all the connected HDMI equipped monitors and analyze all the

content of EDID. The EDID with minimal resolution support will be the reference EDID for incoming

HDMI source players.



Introduction

~ 3 ~

Specifications&PackageContents

Model Name ASP-14H

Technical

Role of usage 1x4 Distribution Amplifier (Splitter)

HDMI compliance HDMI 1.3c [Deep Color, xvYCC color space supported]

DVI compliance DVI 1.1

HDCP compliance Yes

Video bandwidth Single-link 340MHz [10.2Gbps]

Video support Up to WUXGA [1920x1200@60Hz] & UXGA [1600x1200@60Hz]

Audio support

DTS-HD Master Audio, Dolby TrueHD

Dolby Digital, DTS, DVD-Audio, LPCM, SACD, MPCM

ESD protection

[1] Human body model — ±19kV [air-gap discharge] & ±12kV [contact discharge]

[2] Core chipset — ±2kV

EDID capacity Auto

CEC Channel Bypassing

Input TMDS signal 1.2 Volts [peak-to-peak]

Input DDC signal 5 Volts [peak-to-peak, TTL]

Input 1x HDMI [7.1ch audio & video]

Output 4x HDMI [7.1ch audio & video]

HDMI connector Type A [19-pin female]

Mechanical ASP-14H

Housing Metal enclosure

Dimensions

(L x W x H)

Model 155 x 80 x 30mm [6.10” x 3.15” x 1.18”]

Package

Carton

Weight

Model .5Kg [1.1 lbs]

Package

Fixedness Wall-mounting case

Power supply 5V DC

Power consumption 10 Watts [max]

Operation temperature

0~40°C [32~104°F]

Storage temperature

-20~60°C [-4~140°F]

Relative humidity 10~90% RH [no condensation]

Package Contents

1x ASP-14H

1x 5V power supply unit

1x User Manual



~ 4 ~



RearPanel



1. HDMI IN: HDMI input source

2. HDMI OUT: distributed HDMI outputs

3. Power: LED light means power is on

5. +5V DC power jack: connect to 5V power supply unit



When the connected HDMI monitor is verified as HDMI and HDCP compliant, the corresponding LED

will blink.

Panel Descri

tions

~ 5 ~

BroadcastsHDMIsignalto4HDMIdisplays!

1. Switch off all devices, including monitors.

2. Connect to the receivers.

3. Connect an HDMI source (such as a Blu-ray Disc player) to the HDMI In.

4. Plug in 5V DC power supply unit.

5. Power on the HDMI monitors.

6. Power on the HDMI source.



Hardware Installation

~ 6 ~



1. While connecting a new monitor to the splitter, experiencing a short period of time no display may be expected.

Automatic EDID learning will analyze the newly connected monitor to see if the EDID for the HDMI input is necessary

to update.

2. For long range high definition HDMI transmission applications, please adopt CAT5/6 cable based HDMI extenders.



Notice

~ 7 ~

Aurora Multimedia Corp. (“Manufacturer”) warrants that this product is free of defects in both materials and

workmanship for a period of 3 years as defined herein for parts and labor from date of purchase. Motorized

mechanical parts (Hard Drives, DVD, etc), mechanical parts (buttons, doors, etc), remotes and cables are

covered for a period of 1 year. Batteries are not covered by this warranty. During the warranty period, and

upon proof of purchase, the product will be repaired or replaced (with same or similar model) at our option

without charge for parts or labor for the specified product warranty period.

This warranty shall not apply if any of the following:

A) The product has been damaged by negligence, accident, lightning, water, act-of-God or mishandling; or,

B) The product has not been operated in accordance with procedures specified in operating instructions: or,

C) The product has been repaired and or altered by other than manufacturer or authorized service center; or,

D) The product's original serial number has been modified or removed: or,

E) External equipment other than supplied by manufacturer, in determination of manufacturer, shall have

affected the performance, safety or reliability of the product.

F) Part(s) are no longer available for product.

In the event that the product needs repair or replacement during the specified warranty period, product

should be shipped back to Manufacturer at Purchaser's expense. Repaired or replaced product shall be

returned to Purchaser by standard shipping methods at Manufacturer's discretion. Express shipping will be

at the expense of the Purchaser. If Purchaser resides outside the contiguous US, return shipping shall be at

Purchaser's expense.

No other warranty, express or implied other than Manufacturer's shall apply.

Manufacturer does not assume any responsibility for consequential damages, expenses or loss of revenue or

property, inconvenience or interruption in operation experienced by the customer due to a malfunction of

the purchased equipment. No warranty service performed on any product shall extend the applicable

warranty period.

This warranty does not cover damage to the equipment during shipping and Manufacturer assumes no

responsibility for such damage.

This product warranty extends to the original purchaser only and will be null and void upon any assignment

or transfer.

Aurora Multimedia Corp.

205 Commercial Court, Morganville, NJ 07751

Phone: (732) 591-5800 Fax: (732) 591-5801

www.auroramultimedia.com

Limited 3 Year Warranty

Aurora Multimedia ASP12H User manual

Brand: Aurora Multimedia

Model: ASP12H

Category: Video line amplifiers

Type: User manual

Download PDF

report

Aurora Multimedia ASP12H User manual

Aurora Multimedia ASP12H User manual

Related papers

Other documents