ZANKER KIT6460XXK User manual

Page is loading ...

Contents

Safety information 16

Safety instructions 17

Product description 19

Daily use 21

Hints and tips 22

Care and cleaning

24

Troubleshooting 24

Installation 26

Technical data 27

Energy efficiency 27

Subject to change without notice.

Safety information

Before the installation and use of the appliance, carefully read the supplied

instructions. The manufacturer is not responsible for any injuries or damages

that are the result of incorrect installation or usage. Always keep the

instructions in a safe and accessible location for future reference.

Children and vulnerable people safety

• This appliance can be used by children aged from 8 years and above and

persons with reduced physical, sensory or mental capabilities or lack of

experience and knowledge if they have been given supervision or

instruction concerning the use of the appliance in a safe way and

understand the hazards involved.

• Children between 3 and 8 years of age and persons with very extensive

and complex disabilities shall be kept away unless continuously

supervised.

• Children of less than 3 years of age should be kept away unless

continuously supervised.

• Do not let children play with the appliance.

• Keep all packaging away from children and dispose of it appropriately.

• Keep children and pets away from the appliance when it operates or when

it cools down. Accessible parts are hot.

• If the appliance has a child safety device, it should be activated.

• Children shall not carry out cleaning and user maintenance of the

appliance without supervision.

General Safety

• WARNING: The appliance and its accessible parts become hot during

use. Care should be taken to avoid touching heating elements.

• Do not operate the appliance by means of an external timer or separate

remote-control system.

16

• WARNING: Unattended cooking on a hob with fat or oil can be dangerous

and may result in fire.

• NEVER try to extinguish a fire with water, but switch off the appliance and

then cover flame e.g. with a lid or a fire blanket.

• CAUTION: The cooking process has to be supervised. A short term

cooking process has to be supervised continuously.

• WARNING: Danger of fire: Do not store items on the cooking surfaces.

• Metallic objects such as knives, forks, spoons and lids should not be

placed on the hob surface since they can get hot.

• Do not use a steam cleaner to clean the appliance.

• After use, switch off the hob element by its control and do not rely on the

pan detector.

• If the glass ceramic surface / glass surface is cracked, switch off the

appliance and unplug it from the mains. In case the appliance is

connected to the mains directly using junction box, remove the fuse to

disconnect the appliance from power supply. In either case contact the

Authorised Service Centre.

• If the supply cord is damaged, it must be replaced by the manufacturer, an

authorized Service or similarly qualified persons in order to avoid a

hazard.

• WARNING: Use only hob guards designed by the manufacturer of the

cooking appliance or indicated by the manufacturer of the appliance in the

instructions for use as suitable or hob guards incorporated in the

appliance. The use of inappropriate guards can cause accidents.

Safety instructions

Installation

Warning! Only a qualified person must

install this appliance.

Warning! Risk of injury or damage to the

appliance.

• Remove all the packaging.

• Do not install or use a damaged appliance.

• Follow the installation instructions supplied with the

appliance.

• Keep the minimum distance from other appliances

and units.

• Always take care when moving the appliance as it is

heavy. Always use safety gloves and enclosed

footwear.

• Seal the cut surfaces with a sealant to prevent

moisture to cause swelling.

• Protect the bottom of the appliance from steam and

moisture.

• Do not install the appliance adjacent to a door or

under a window. This prevents hot cookware falling

from the appliance when the door or the window is

opened.

Electrical Connection

Warning! Risk of fire and electric shock.

• All electrical connections should be made by a

qualified electrician.

• The appliance must be earthed.

17

• Before carrying out any operation make sure that

the appliance is disconnected from the power

supply.

• Make sure that the parameters on the rating plate

are compatible with the electrical ratings of the

mains power supply.

• Make sure the appliance is installed correctly. Loose

and incorrect electricity mains cable or plug (if

applicable) can make the terminal become too hot.

• Use the correct electricity mains cable.

• Do not let the electricity mains cable tangle.

• Make sure that a shock protection is installed.

• Use the strain relief clamp on the cable.

• Make sure the mains cable or plug (if applicable)

does not touch the hot appliance or hot cookware,

when you connect the appliance to the near

sockets.

• Do not use multi-plug adapters and extension

cables.

• Make sure not to cause damage to the mains plug

(if applicable) or to the mains cable. Contact our

Authorised Service Centre or an electrician to

change a damaged mains cable.

• The shock protection of live and insulated parts

must be fastened in such a way that it cannot be

removed without tools.

• Connect the mains plug to the mains socket only at

the end of the installation. Make sure that there is

access to the mains plug after the installation.

• If the mains socket is loose, do not connect the

mains plug.

• Do not pull the mains cable to disconnect the

appliance. Always pull the mains plug.

• Use only correct isolation devices: line protecting

cut-outs, fuses (screw type fuses removed from the

holder), earth leakage trips and contactors.

• The electrical installation must have an isolation

device which lets you disconnect the appliance from

the mains at all poles. The isolation device must

have a contact opening width of minimum 3 mm.

Use

Warning! Risk of injury, burns and

electric shock.

• Remove all the packaging, labelling and protective

film (if applicable) before first use.

• This appliance is for household use only.

• Do not change the specification of this appliance.

• Make sure that the ventilation openings are not

blocked.

• Do not let the appliance stay unattended during

operation.

• Set the cooking zone to “off” after each use.

• Do not rely on the pan detector.

• Do not put cutlery or saucepan lids on the cooking

zones. They can become hot.

• Do not operate the appliance with wet hands or

when it has contact with water.

• Do not use the appliance as a work surface or as a

storage surface.

• If the surface of the appliance is cracked, disconnect

immediately the appliance from the power supply.

This to prevent an electrical shock.

• Users with a pacemaker must keep a distance of

minimum 30 cm from the induction cooking zones

when the appliance is in operation.

• When you place food into hot oil, it may splash.

Warning! Risk of fire and explosion

• Fats and oil when heated can release flammable

vapours. Keep flames or heated objects away from

fats and oils when you cook with them.

• The vapours that very hot oil releases can cause

spontaneous combustion.

• Used oil, that can contain food remnants, can cause

fire at a lower temperature than oil used for the first

time.

• Do not put flammable products or items that are wet

with flammable products in, near or on the

appliance.

Warning! Risk of damage to the

appliance.

• Do not keep hot cookware on the control panel.

• Do not put a hot pan cover on the glass surface of

the hob.

• Do not let cookware to boil dry.

• Be careful not to let objects or cookware fall on the

appliance. The surface can be damaged.

• Do not activate the cooking zones with empty

cookware or without cookware.

• Do not put aluminium foil on the appliance.

• Cookware made of cast iron, aluminium or with a

damaged bottom can cause scratches on the glass /

glass ceramic. Always lift these objects up when you

have to move them on the cooking surface.

• This appliance is for cooking purposes only. It must

not be used for other purposes, for example room

heating.

Care and cleaning

• Clean the appliance regularly to prevent the

deterioration of the surface material.

• Deactivate the appliance and let it cool down before

you clean it.

• Disconnect the appliance from the electrical supply

before maintenance.

18

• Do not use water spray and steam to clean the

appliance.

• Clean the appliance with a moist soft cloth. Only use

neutral detergents. Do not use any abrasive

products, abrasive cleaning pads, solvents or metal

objects.

Service

• To repair the appliance contact an Authorised

Service Centre.

• Use original spare parts only.

Disposal

Warning! Risk of injury or suffocation.

• Contact your municipal authority for information on

how to discard the appliance correctly.

• Disconnect the appliance from the mains supply.

• Cut off the mains electrical cable close to the

appliance and dispose of it.

Product description

Cooking surface layout

145 mm

180 mm

210 mm

180 mm

1

1 1

2

1

Induction cooking zone

2

Control panel

Control panel layout

1 2 4 5

8

3

679

Use the sensor fields to operate the appliance. The displays, indicators and sounds tell which functions operate.

Sensor

field

Function Comment

1

ON / OFF To activate and deactivate the hob.

2

Lock / Child Safety Device To lock / unlock the control panel.

3

- Heat setting display To show the heat setting.

19

Sensor

field

Function Comment

4

- Timer indicators of cooking zones To show for which zone you set the time.

5

- Timer display To show the time in minutes.

6

- To select the cooking zone.

7

/

- To increase or decrease the time.

8

/

- To set a heat setting.

9

PowerBoost To activate the function.

Heat setting displays

Display Description

The cooking zone is deactivated.

-

The cooking zone operates.

Automatic Heat Up operates.

PowerBoost operates.

+ digit

There is a malfunction.

A cooking zone is still hot (residual heat).

Lock / Child Safety Device operates.

Incorrect or too small cookware or no cookware on the cooking zone.

Automatic Switch Off operates.

Residual heat indicator

Warning! There is a risk of burns

from residual heat. The indicators show

the level of the residual heat for the

cooking zones you are currently using.

The indicators may also come on for the

neighbouring cooking zones even if you

are not using them.

The induction cooking zones produce the heat

necessary for the cooking process directly in the bottom

of the cookware. The glass ceramic is heated by the

heat of the cookware.

20

Daily use

Warning! Refer to Safety chapters.

Activating and deactivating

Touch for 1 second to activate or deactivate the

hob.

Automatic Switch Off

The function deactivates the hob automatically if:

• all cooking zones are deactivated,

• you do not set the heat setting after you activate the

hob,

• you spill something or put something on the control

panel for more than 10 seconds (a pan, a cloth,

etc.). An acoustic signal sounds and the hob

deactivates. Remove the object or clean the control

panel.

• the hob gets too hot (e.g. when a saucepan boils

dry). Let the cooking zone cool down before you use

the hob again.

• you use incorrect cookware. The symbol

comes

on and the cooking zone deactivates automatically

after 2 minutes.

• you do not deactivate a cooking zone or change the

heat setting. After some time

comes on and the

hob deactivates.

The relation between the heat setting and the time

after which the hob deactivates:

Heat setting The hob deactivates af-

ter

, 1 - 2

6 hours

3 - 4 5 hours

5 4 hours

6 - 9 1.5 hour

The heat setting

Touch to increase the heat setting. Touch to

decrease the heat setting. Touch and at the

same time to deactivate the cooking zone.

Automatic Heat Up

If you activate this function you can get a necessary

heat setting in a shorter time. The function sets the

highest heat setting for some time and then decreases

to the correct heat setting.

To activate the function the cooking zone

must be cold.

To activate the function for a cooking zone: touch

( comes on). Immediately touch ( comes

on). Immediately touch until the correct heat setting

comes on. After 3 seconds

comes on.

To deactivate the function: touch .

PowerBoost

This function makes more power available to the

induction cooking zones. The function can be activated

for the induction cooking zone only for a limited period

of time. After this time the induction cooking zone

automatically sets back to the highest heat setting.

Refer to “Technical data” chapter.

To activate the function for a cooking zone: touch

. comes on.

To deactivate the function: touch

or .

Timer

Count Down Timer

You can use this function to set how long the cooking

zone should operate for a single cooking session.

First set the heat setting for the cooking zone then set

the function.

To set the cooking zone: touch

again and again

until the indicator of a necessary cooking zone comes

on.

To activate the function or change the time: touch

or of the timer to set the time (00 - 99 minutes).

When the indicator of the cooking zone starts to flash

slowly the time counts down.

To see the remaining time: set the cooking zone with

. The indicator of the cooking zone starts to flash

quickly. The display shows the remaining time.

To deactivate the function: set the cooking zone with

and touch . The remaining time counts back to

00. The indicator of the cooking zone goes out.

21

When the time comes to an end, the

sound operates and 00 flashes. The

cooking zone deactivates.

To stop the sound: touch .

Minute Minder

You can use this function as a Minute Minder when the

hob is activated and the cooking zones do not operate.

The heat setting display shows .

To activate the function: touch . Touch or

of the timer to set the time. When the time comes to an

end, the sound operates and 00 flashes.

To stop the sound: touch .

To deactivate the function: touch and then touch

. The remaining time counts back to 00

The function has no effect on the

operation of the cooking zones.

Lock

You can lock the control panel while cooking zones

operate. It prevents an accidental change of the heat

setting.

Set the heat setting first.

To activate the function: touch . comes on for 4

seconds. The Timer stays on.

To deactivate the function: touch

. The previous

heat setting comes on.

When you deactivate the hob, you also

deactivate this function.

Child Safety Device

This function prevents an accidental operation of the

hob.

To activate the function: activate the hob with

. Do

not set the heat setting. Touch for 4 seconds.

comes on. Deactivate the hob with .

To deactivate the function: activate the hob with .

Do not set the heat setting. Touch for 4 seconds.

comes on. Deactivate the hob with .

To override the function for only one cooking time:

activate the hob with

. comes on. Touch for 4

seconds. Set the heat setting in 10 seconds. You can

operate the hob. When you deactivate the hob with

the function operates again.

Power management

• Cooking zones are grouped according to the

location and number of the phases in the hob. See

the illustration.

• Each phase has a maximum electricity loading of

3700 W.

• The function divides the power between cooking

zones connected to the same phase.

• The function activates when the total electricity

loading of the cooking zones connected to a single

phase exceeds 3700 W.

• The function decreases the power to the other

cooking zones connected to the same phase.

• The heat setting display of the reduced zones

changes between two levels.

Hints and tips

Warning! Refer to Safety chapters.

Cookware

For induction cooking zones a strong

electro-magnetic field creates the heat in

the cookware very quickly.

22

Use the induction cooking zones with

suitable cookware.

Cookware material

• correct: cast iron, steel, enamelled steel, stainless

steel, multi-layer bottom (with a correct marking

from a manufacturer).

• not correct: aluminium, copper, brass, glass,

ceramic, porcelain.

Cookware is suitable for an induction hob if:

• water boils very quickly on a zone set to the highest

heat setting.

• a magnet pulls on to the bottom of the cookware.

The bottom of the cookware must be as

thick and flat as possible.

Ensure pan bases are clean and dry

before placing on the hob surface.

Cookware dimensions

Induction cooking zones adapt to the dimension of the

bottom of the cookware automatically.

The cooking zone efficiency is related to the diameter of

the cookware. The cookware with a diameter smaller

than the minimum receives only a part of the power

generated by the cooking zone.

Refer to "Technical data".

The noises during operation

If you can hear:

• crack noise: cookware is made of different materials

(a sandwich construction).

• whistle sound: you use a cooking zone with a high

power level and the cookware is made of different

materials (a sandwich construction).

• humming: you use a high power level.

• clicking: electric switching occurs.

• hissing, buzzing: the fan operates.

The noises are normal and do not indicate any

malfunction.

Examples of cooking applications

The correlation between the heat setting of a zone and

its consumption of power is not linear. When you

increase the heat setting, it is not proportional to the

increase of the consumption of power. It means that a

cooking zone with the medium heat setting uses less

than a half of its power.

The data in the table is for guidance

only.

Heat setting Use to: Time

(min)

Hints

- 1

Keep cooked food warm. as nec-

essary

Put a lid on the cookware.

1 - 2 Hollandaise sauce, melt: butter, choco-

late, gelatine.

5 - 25 Mix from time to time.

1 - 2 Solidify: fluffy omelettes, baked eggs. 10 - 40 Cook with a lid on.

2 - 3 Simmer rice and milkbased dishes,

heat up ready-cooked meals.

25 - 50 Add at least twice as much liquid as

rice, mix milk dishes halfway through

the procedure.

3 - 4 Steam vegetables, fish, meat. 20 - 45 Add a couple of tablespoons of liquid.

4 - 5 Steam potatoes. 20 - 60 Use max. ¼ l of water for 750 g of po-

tatoes.

4 - 5 Cook larger quantities of food, stews

and soups.

60 - 150 Up to 3 l of liquid plus ingredients.

23

Heat setting Use to: Time

(min)

Hints

6 - 7 Gentle fry: escalope, veal cordon bleu,

cutlets, rissoles, sausages, liver, roux,

eggs, pancakes, doughnuts.

as nec-

essary

Turn halfway through.

7 - 8 Heavy fry, hash browns, loin steaks,

steaks.

5 - 15 Turn halfway through.

9 Boil water, cook pasta, sear meat (goulash, pot roast), deep-fry chips.

Boil large quantities of water. PowerBoost is activated.

Care and cleaning

Warning! Refer to Safety chapters.

General information

• Clean the hob after each use.

• Always use cookware with a clean base.

• Scratches or dark stains on the surface have no

effect on how the hob operates.

• Use a special cleaner suitable for the surface of the

hob.

• Use a special scraper for the glass.

Cleaning the hob

• Remove immediately: melted plastic, plastic foil,

sugar and food with sugar, otherwise, the dirt can

cause damage to the hob. Take care to avoid burns.

Use a special hob scraper on the glass surface at

an acute angle and move the blade on the surface.

• Remove when the hob is sufficiently cool:

limescale rings, water rings, fat stains, shiny metallic

discoloration. Clean the hob with a moist cloth and a

non-abrasive detergent. After cleaning, wipe the hob

dry with a soft cloth.

• Remove shiny metallic discoloration: use a

solution of water with vinegar and clean the glass

surface with a cloth.

Troubleshooting

Warning! Refer to Safety chapters.

What to do if...

Problem Possible cause Remedy

You cannot activate or operate the

hob.

The hob is not connected to an

electrical supply or it is connected

incorrectly.

Check if the hob is correctly connec-

ted to the electrical supply. Refer to

the connection diagram.

The fuse is blown. Make sure that the fuse is the cause

of the malfunction. If the fuse is

blown again and again, contact a

qualified electrician.

24

Problem Possible cause Remedy

You do not set the heat setting for

10 seconds.

Activate the hob again and set the

heat setting in less than 10 sec-

onds.

You touched 2 or more sensor fields

at the same time.

Touch only one sensor field.

There is water or fat stains on the

control panel.

Clean the control panel.

An acoustic signal sounds and the

hob deactivates.

An acoustic signal sounds when the

hob is deactivated.

You put something on one or more

sensor fields.

Remove the object from the sensor

fields.

The hob deactivates. You put something on the sensor

field .

Remove the object from the sensor

field.

Residual heat indicator does not

come on.

The zone is not hot because it oper-

ated only for a short time or the sen-

sor is damaged.

If the zone operated sufficiently long

to be hot, speak to an Authorised

Service Centre.

Automatic Heat Up does not oper-

ate.

The zone is hot. Let the zone become sufficiently

cool.

The highest heat setting is set. The highest heat setting has the

same power as the function.

The heat setting changes between

two levels.

Power management operates. Refer to "Daily use".

The sensor fields become hot. The cookware is too large or you

put it too near to the controls.

Put large cookware on the rear

zones if possible.

comes on.

Child Safety Device or Lock oper-

ates.

Refer to "Daily use".

comes on.

There is no cookware on the zone. Put cookware on the zone.

The cookware is unsuitable. Use suitable cookware. Refer to

"Hints and tips".

The diameter of the bottom of the

cookware is too small for the zone.

Use cookware with correct dimen-

sions. Refer to "Technical data".

and a number come on.

There is an error in the hob. Deactivate the hob and activate it

again after 30 seconds. If

comes on again, disconnect the hob

from the electrical supply. After 30

seconds, connect the hob again. If

the problem continues, speak to an

Authorised Service Centre.

25

Problem Possible cause Remedy

You can hear a constant beep

noise.

The electrical connection is incor-

rect.

Disconnect the hob from the electri-

cal supply. Ask a qualified electri-

cian to check the installation.

If you cannot find a solution...

If you cannot find a solution to the problem yourself,

contact your dealer or an Authorised Service Centre.

Give the data from the rating plate. Give also three digit

letter code for the glass ceramic (it is in the corner of the

glass surface) and an error message that comes on.

Make sure, you operated the hob correctly. If not the

servicing by a service technician or dealer will not be

free of charge, also during the warranty period. The

instructions about the Service Centre and conditions of

guarantee are in the guarantee booklet.

Installation

Warning! Refer to Safety chapters.

Before the installation

Before you install the hob, write down the information

bellow from the rating plate. The rating plate is on the

bottom of the hob.

Serial number ...........................

Built-in hobs

Only use the built-in hobs after you assemble the hob

into correct built-in units and work surfaces that align to

the standards.

Connection cable

• The hob is supplied with a connection cable.

• To replace the damaged mains cable, use the cable

type: H05V2V2-F which withstands a temperature of

90°C or higher. Speak to your local Service Centre.

Assembly

min.

50mm

min.

500mm

R 5mm

min.

55mm

560

+1

mm

490

+1

mm

26

min.

28 mm

min.

12 mm

Technical data

Rating plate

Model KIT6460XXK PNC 949 492 324 00

Typ 61 B4A 00 AA 220 - 240 V / 400 V 2N 50 - 60 Hz

Induction 7.35 kW Made in Romania

Ser.Nr. ................. 7.35 kW

ZANKER

Cooking zones specification

Cooking zone Nominal power

(maximum heat

setting) [W]

PowerBoost [W] PowerBoost maxi-

mum duration

[min]

Cookware diameter

[mm]

Left front 2300 3700 10 180 - 210

Left rear 1800 - - 145 - 180

Right front 1400 2500 4 125 - 145

Right rear 1800 - - 145 - 180

The power of the cooking zones can be different in

some small range from the data in the table. It changes

with the material and dimensions of the cookware.

For optimal cooking results use cookware no larger than

the diameter in the table.

Energy efficiency

Product information according to EU 66/2014

Model identification KIT6460XXK

Type of hob Built-In Hob

27

Number of cooking zones 4

Heating technology Induction

Diameter of circular cooking zones

(Ø)

Left front

Left rear

Right front

Right rear

21.0 cm

18.0 cm

14.5 cm

18.0 cm

Energy consumption per cooking

zone (EC electric cooking)

Left front

Left rear

Right front

Right rear

188.9 Wh / kg

178.8 Wh / kg

183.4 Wh / kg

178.8 Wh / kg

Energy consumption of the hob

(EC electric hob)

182.5 Wh / kg

EN 60350-2 - Household electric cooking appliances -

Part 2: Hobs - Methods for measuring performance

Energy saving

You can save energy during everyday cooking if you

follow below hints.

• When you heat up water, use only the amount you

need.

• If it is possible, always put the lids on the cookware.

• Before you activate the cooking zone put the

cookware on it.

• Put the smaller cookware on the smaller cooking

zones.

• Put the cookware directly in the centre of the

cooking zone.

• Use the residual heat to keep the food warm or to

melt it.

Environmental concerns

Recycle materials with the symbol . Put the

packaging in relevant containers to recycle it. Help

protect the environment and human health by recycling

waste of electrical and electronic appliances. Do not

dispose of appliances marked with the symbol with

the household waste. Return the product to your local

recycling facility or contact your municipal office.

28

Page is loading ...

www.electrolux.com/shop

867349295-A-232018

ZANKER KIT6460XXK User manual

ZANKER KIT6460XXK User manual

in other languages

Related papers

Other documents