Page is loading ...
1
WASHING MACHINE
EWF 14118
INSTRUCTION BOOKLET
FOLLETO DE INSTRUCCIONES
147142000
CZ
SK
GB
ES
LAVADORA
1-25 E S Mac64.indd 11-25 E S Mac64.indd 1 3/4/06 12:45: 31 AM3/4/06 12:45: 31 AM
2
The symbols you will see on some paragraphs of this booklet have the following meaning:
The warning triangle and/or the key words (Warning!, Caution!) emphasize information that is particularly
important for your safety or correct functioning of the appliance.
The information marked with this symbol provides additional instructions and practical tips on the use of
the appliance.
Tips and information about economical and ecological use of the machine are marked with this symbol.
Our contribution to the protection of the
environment: we use environmentally
friendly paper.
2
Dear customer,
Please read these operating instructions carefully
and pay particular attention to the safety notes
indicated in the first pages. We recommend that you
keep this instruction booklet for future reference and
pass it on to any future owners.
Programme information 13
Washing hints 14
Sorting the laundry 14
Temperatures 14
Before loading the laundry 14
Maximum loads 14
Laundry weights 14
Removing stains 14
Detergents and additives 15
Internationnal wash code symbols 16
Operating sequence 17-19
Washing programmes 20-21
Maintenance 22
Bodywork 22
Door seal 22
Detergent dispenser drawer 22
Drain pump 22
Water inlet filter 23
Emergency emptying out 23
Frost precautions 23
Something not working? 24-25
Warnings 3
Disposal 4
Tips for environmental protection 4
Technical specifications 4
Installation 5
Unpacking 5
Positioning 5
Water inlet 5
Water drainage 6
Electrical connection 6
Your new washing machine 7
Description of the appliance 7
Detergent dispenser drawer 7
Use 8
Control panel 8
Controls 8-13
Contents
Transport damages
When unpacking the appliance, check that it is not
damaged. If in doubt, do not use it and contact the
Service Centre.
1-25 ES Mac64.indd 21-25 ES Mac64.indd 2 3/4/06 12:45:32 AM3/4/06 12:45:32 AM
3
ENGLISH
3
Installation
• All internal packing must be removed before using
the appliance. Serious damage may be caused to
the machine or adjacent furniture if the protective
transit devices are not removed or are not
completely removed. Refer to the relevant
paragraph in the instruction book.
• Any electrical work required to install this
appliance must be carried out by a qualified
electrician.
• Any plumbing work required to install this
appliance must be carried out by a qualified
plumber.
• After having installed the machine, check that it is
not standing on its electrical supply cable.
• If the appliance is placed on a carpeted floor,
ensure that air can circulate freely between the
feet and the floor.
Use
• This appliance is designed for domestic use. It
must not be used for purposes other than those
for which it was designed.
• Only wash fabrics which are designed to be
machine washed. Follow the instructions on each
garment label.
• Do not overload the appliance. Follow the
instructions in the instruction book.
• Make sure that all pockets are empty. Objects
such as coins, safety pins, pins and screws can
cause extensive damage.
• Do not machine wash garments saturated with
petroleum, methylated spirits, trichlorethylene, etc.
If such fluids have been used to remove stains
prior to washing, wait until they have completely
evaporated from the fabric before placing
garments in the appliance.
• Place small items such as socks, belts, etc. in a
cloth bag or pillowcase to prevent them getting
trapped between the drum and the tub.
Warnings
• Use only the recommended quantities of fabric
softener. An excessive amount could damage the
laundry.
• Leave the porthole door slightly ajar when the
appliance is not in use. This preserves the door
seal and prevents the formation of musty smells.
• Always check that water has emptied out before
opening the door. If not, drain the water following
the instructions in the instruction book.
• Always unplug the appliance and shut the water
tap after use.
General safety
• Repairs to the machine must be carried out only by
qualified personnel. Repairs carried out by
inexperienced persons could cause serious
danger. Contact your local Service Centre.
• Never pull the power supply cable to remove the
plug from the socket; always take hold of the plug
itself.
• During high temperature wash programmes the
door glass may get hot. Do not touch it!
Child safety
• Children are often not aware of how dangerous
electrical appliances can be. When the machine is
working, children should be carefully supervised
and not be allowed to play with the appliance.
• The packaging components (e.g. plastic film,
polystyrene) can be dangerous to children - danger
of suffocation! Keep them out of children’s reach.
• Keep all detergents in a safe place out of children’s
reach.
• When the appliance is to be scrapped, cut off the
electrical supply cable and destroy the plug with
the remaining cable. Disable the door catch in
order to prevent children from becoming trapped
inside while playing.
The following warnings are provided in the interests of overall safety. You must read them carefully
before installing or using the appliance.
1-25 ES Mac64.indd 31-25 ES Mac64.indd 3 3/4/06 12:45:32 AM3/4/06 12:45:32 AM
4
4
Disposal
Tips for environmental protection
Packaging materials
The materials marked with the symbol are
recyclable.
>PE<=polyethylene
>PS<=polystyrene
>PP<=polypropylene
This means that they can be recycled by disposing of
them properly in appropriate collection containers.
Machine
Use authorised disposal sites for your old appliance.
Help to keep your country tidy!
To save water, energy and to help protect the
environment, we recommend that you follow these tips:
• Normally soiled laundry may be washed without
prewashing in order to save detergent, water and
time (the environment is protected too!).
• The machine works more economically if it is fully
loaded.
• With adequate pre-treatment, stains and limited
soiling can be removed; the laundry can then be
washed at a lower temperature.
• Measure out detergent according to the water
hardness, the degree of soiling and the quantity of
laundry being washed.
DIMENSIONS Height 85 cm
Width 60 cm
Depth 60 cm
MAXIMUM LOAD Cotton 8.0 kg
Synthetics 3.5 kg
Delicates 3.5 kg
Woollens 2.0 kg
Hand wash 2.0 kg
Silk 1.0 kg
SPIN SPEED 1400 rpm max.
POWER SUPPLY VOLTAGE/FREQUENCY 230 V/50 Hz
TOTAL POWER ABSORBED 2200W
MINIMUM FUSE PROTECTION 10 A
WATER PRESSURE Minimum 500 kPa
Maximum 800 kPa
This appliance complies with the following EEC Directives:
73/23/EEC of 19/02/73 relating to low voltage
89/336/EEC of 03/05/89 relating to electromagnetic compatibility.
Technical specifications
• The symbol on the product or on its packaging
indicates that this product may not be treated as
household waste. Instead it shall be handed over
to the applicable collection point for the recycling of
electrical and electronic equipment. By ensuring
this product is disposed of correctly, you will help
prevent potential negative consequences for the
environment and human health, which could
otherwise be caused bu inappropraite waste
handling of this product. For more detail
information about recycling of this product, please
contact your local city office, your household waste
disposal service or the shop where you purchased
the product.
1-25 ES Mac64.indd 41-25 ES Mac64.indd 4 3/4/06 12:45:33 AM3/4/06 12:45:33 AM
5
ENGLISH
5
Unpacking
All transit bolts and packing must be
removed before using the appliance.
You are advised to keep all transit devices so that they
can be refitted if the machine ever has to be transported
again.
1. Using a spanner, unscrew and remove the two
rear bottom screws. Slide out the two plastic pins.
Lay the machine on its back, taking care not to
squash the hoses. This can be avoided by placing
one of the corner packing pieces between the
machine and the floor
2. Remove the polystyrene block(s) from the bottom
of the machine and release the two plastic bags.
3. Very carefully slide out the left polythene bag,
removing it towards the right and then
downwards.
4. Very carefully slide out the right polythene bag,
removing it towards the left and then upwards.
Remove the bottom cover placed into the drum of
your appliance, lay it’s hook as the arrow ’A’
indicates and push the top of the cover to seal it
closed
Important: You can find more detailed instructions
regarding the bottom cover assembling in it’s relative
bag.
5. Set the machine upright and remove the
remaining rear screw. Slide out the relevant pin.
6. Plug all the holes with the plugs which you will
find in the envelope containing the instruction
manual.
Positioning
Install the machine on a flat hard floor.
Make sure that air circulation around the machine
is not impeded by carpets, rugs etc. Check that
the machine does not touch the wall or cupboard
units. Carefully level by screwing the adjustable
feet in or out. Never place cardboard, wood or
similar materials under the machine to
compensate for any unevenness in the floor.
Water inlet
Connect the water inlet hose to a tap with 3/4” BSP
thread.
Use the hose supplied with the washing machine.
DO NOT USE OLD HOSES.
The other end of the inlet hose which connects to the
machine can be turned in any direction. Simply
loosen the fitting, rotate the hose and retighten the
fitting, making sure there are no water leaks.
P1051
Installation
P1128
P0002
P1129
P0001
P1123
2
3
1
P1126
P1127
P1088
P0021
1-25 ES Mac64.indd 51-25 ES Mac64.indd 5 3/4/06 12:45:34 AM3/4/06 12:45:34 AM
6
6
The inlet hose must not be lengthened. If it is too
short and you do not wish to move tap, you will have
to purchase a new longer hose specially designed
for this type of use
Water drainage
The end of the drain hose can be positioned in three
ways:
Hooked over the edge of a sink using the plastic
hose guide supplied with the machine. In this
case, make sure the end cannot come unhooked
when the machine is emptying.
This could be done by tying it to the tap with a piece
of string or attaching it to the wall.
In a sink drain pipe branch. This branch must be
above the trap so that the bend is at least 60 cm
above the ground.
Directly into a drain pipe at a height of not less
than 60 cm and not more than 90 cm.
The end of the drain hose must always be
ventilated, i.e. the inside diameter of the drain pipe
must be larger than the outside diameter of the drain
hose.
The drain hose must not be kinked. Run it along the
floor; only the part near the drainage point must be
raised.
P0022
Electrical connection
This machine is designed to operate on a 230 V,
single-phase, 50 Hz supply.
Check that your domestic electrical installation can
take the maximum load required (2.2 kW), also
taking into account any other appliances in use.
Connect the machine to an earthed socket.
The manufacturer declines any responsibility
for damage or injury through failure to comply
with the above safety precaution.
Should the appliance power supply cable
need to be replaced, this must be carried out
by our Service Centre.
Important!
When the appliance is installed the power supply
cable must be easily accessible.
P0023
1-25 ES Mac64.indd 61-25 ES Mac64.indd 6 3/4/06 12:45:35 AM3/4/06 12:45:35 AM
7
7
1. Detergent dispenser drawer
2. Control panel
3. Door handle
4. Drain pump
5. Adjustable feet
6. Door lock indicator
Detergent dispenser drawer
Pre-wash
Main wash
Fabric softener, starch
Your new washing machine
Description of the appliance
EWF 14118
Change
Options
Exit
SpinTemp.
Start/
Add Clothes
6
This new machine, which is fitted with the New Jet System, meets all modern requirements for effective
treatment of laundry with low water, energy and detergent consumption.
• The special handwash programme with its new delicate wash system treats your delicate items with
extreme care.
• The special wool programme with its new delicate wash system treats your woollens with extreme care.
• The automatic cooling of the washing water from 95° to 60°C before draining will prevent old drain pipes
from being deformed.
• The balance control device ensures the machine is stable during the spin.
P1206
1-25 ES Mac64.indd 71-25 ES Mac64.indd 7 3/4/06 12:45:36 AM3/4/06 12:45:36 AM
8
8
Use
Control panel
1. Detergent Dispenser Drawer
The programme chart in English is in the
interior part of the detergent dispenser drawer and
the other language programme card is supplied with
the manual booklet.
2. Programme selector dial
The programme selector dial is divided into four
sections:
1. Cotton , Cotton 45 , Eco Cotton
(Blue section)
2. Synthetic (Green section)
3.Delicate , wool , handwash , silk ,
minipro 30 , Rinse , Drain , Spin and
Delicate spin (Grey section)
4. Memory 1 , Memory 2 (Green section)
The selector dial can be turned either clockwise or
anti-clockwise. Position “Eco Cotton”
corresponds to an energy saving programme for
cotton and “Off” to reset programme or switching
OFF the machine. At the end of programme, the
selector dial must be turned to position “Off” to
switch the machine OFF.
Attention !
If you turn the programme selector dial to another
programme when the machine is working, a warning
message appears for 4 secconds on the display while
the buzzer sounds 3 times.
345 6 7
12
EWF 14118
Change
Options
Exit
SpinTemp.
3. Display
The display is used for setting a large number of
functions and combine them with each other using
only a few control elements (1 programme selector
dial and 6 buttons)This simple control method is
made easy, thanks to the interactive display.
Interactive means that the washing machine display
changes to reflect each step you have entered. This
ensures that only those settings that make sense are
made. You are able to see the current settings at any
time in the information panel and in the option row.
1. Information panel shows the current settings
2. Real time clock
3. End cycle time
4. Selection shows temperature, spin speed,
options and extras.
4. Temperature button “Temp.”
Press this button repeatedly to increase or decrease
the temperature, if you want your laundry to be
washed at a temperature different from the one
proposed by the washing machine.
Maximum temperatures are 95°C for cotton ,
60°C for synthetic fabrics , 40°C for delicate
fabrics , wool and fabrics to be hand-washed
, 30°C for silk and Minipro 30 , while «O»
corresponds to cold wash.
Change
Options
Exit
Cotton
Cycle and at
08.30
10.55
95°C 1400
1 23
4
Temp. Spin
1-25 ES Mac64.indd 81-25 ES Mac64.indd 8 3/4/06 12:45:36 AM3/4/06 12:45:36 AM
9
ENGLISH
9
By pressing Temperature “Temp.” button, the
relevant message will appear on the second row of
the display (instead of «cycle end at»). In the corner
of the third row appears the indication of the selected
temperature.
5. Spin Speed button “Spin”
Press this button repeatedly to change the spin
speed, if you want your laundry to be spun at a
speed different from the one proposed by the
washing machine.
Maximum speeds are:
• for cotton : 1400 rpm.
• for wool , and Synthetics : 1000 rpm.
• for fabircs to be handwashed : 900 rpm.
• for delicate and minipro 30 : 800 rpm.
• for silk fabrics : 700 rpm;
By pressing the Spin speed button you can also
choose No Spin option «O», Rinse Hold option
and Night cycle option .
No spin «O» option eliminates all the spin phases
and increases the rinses number for cottons and
synthetics.
Rinse hold option : when you choose this option,
the machine will not drain the water of the last rinse,
so as not to wrinkle the laundry.
Night cycle option : when you choose this
option, the machine will not drain the water of the
last rinse, so as not to wrinkle the laundry.As all
spinning phases are suppressed, this washing cycle
is very noiseless and it can be selectionned at night
or in times with a more economical power rate.
On cotton and synthetic programmes the
rinses will be performed with more water.
To complete the cycle, choose one of the following
programmes:
Change
Options
Exit
COTTON
MAX 95°C
08.30
10.55
60°C
Temp. Spin
Change
Options
Exit
COTTON
MAX 1400
08.30
10.55
1400
Temp. Spin
Drain
To drain the water select Drain programme by
means of the selector dial, then press the “Start/ Add
clothes” button.
Spin
To spin the laundry choose spin or delicate spin
programme by means of the selector dial; select spin
speed by means of button “Spin” and then press
the “Start/ Add clothes” button.
Important!
Before choosing the programme Drain , Spin
or Delicate Spin the selector dial has to be
positioned on « » (OFF).
6. «Options», «Change» and «Exit»
buttons
Options button allows you to move through the
option icons.
Change button allows you to select/change the
status of the different icons.
Exit button allows you to return to the previous
selection.
Change
Options
Exit
Cotton
Cycle end at
08.30
10.55
60°C 1400
Temp. Spin
Change
Options
Exit
Extra Rinse
Yes 10.55
Temp. Spin
Change
Options
Exit
Extra Rinse
No 10.55
Temp. Spin
1-25 ES Mac64.indd 91-25 ES Mac64.indd 9 3/4/06 12:45:38 AM3/4/06 12:45:38 AM
10
10
Depending on the program, different functions can be
combined. These must be selected after choosing the
desired program and before pressing the “Start/ Add
clothes” button.
By pressing the "Options" button, all the symbol icons,
allowed for the selected programme will appear in the
display (allowed for the selected programme).
The first option will start flashing. Its name and
status will appear in the display.
If you want to change the option status, press
"Change" button. There will appear a line below the
selected icon, indicating that the option is set.
To select the other options press again the «Options»
button and proceed as before.
Once you have completed the selection of the options,
pressing the «Exit» button, the selected icons will
remain fixed in the display.
Note: To modify the already chosen option selections,
repeat the previous procedure.
Important! While selecting the option, if you press the
temperature “Temp.”, “Spin” , or “Start/ Add clothes”
button, the relative function will be executed.
EXTRA RINSE: this option can be selected with
all programmes, except the wool ,handwash
programs and Mini programe .The machine will add
2 rinses for cottons and 1 rinse for synthetics ,
delicates and silk .
This option is recommended for people who are
allergic to detergents, and in areas where the water is
very soft.
TIME SAVING: this option can be used for lightly
soiled cotton, synthetic or delicates items in order to
obtain a good washing program in a short time. The
washing time will be reduced according to the type of
fabric and the selected temperature. Selecting this
option «Short» or «Very Short» will be shown in the
display.
DELAY START: this option makes it possible to
delay the starting of the washing program by 30 min -
60 min - 90 min, 2 hours and then by 1 hour till 20
hours. The delay you have selected is indicated in the
display.
You must select this option after you have set the
program and before you press the Start/Add clothes
button .
Change
Options
Exit
Delay Start
Start in 30 min 11.25
Temp. Spin
Change
Options
Exit
Delay Start
No 10.55
Temp. Spin
you press the “Start/ Add clothes” button. If you
have already pressed the “Start/ Add clothes”
button and you wish to cancel the Delay time proceed
as follows:
1. set the washing machine to PAUSE by pressing
the “Start/ Add clothes” button;
2. deselect the Delay start option, changing the
status;
3. press the “Start/ Add clothes” button to start
the program.
Important!
The selected delay can be changed only after
selecting the washing program again.
The door will locked throughout the delay time.
If you need to open the door, you must first set the
washing machine to PAUSE by pressing the “Start/
Add clothes” button. After you have closed the
door, press the Start/Add clothes button again.
The Delay Start cannot be selected with
SPIN/DELICATE SPIN and DRAIN programmes.
PREWASH: select this option if you wish your
laundry to be prewashed before the main wash (not
available for wool and handwash cycle,
Minipro30 and silk programmes ).
The Prewash ends with a short spin at 650 rpm in
programmes for cotton and synthetic fabrics, whereas
in the program for delicate fabrics the water is only
drained.
INTENSIVE: for heavy soiled laundry.
This option can be selected only for cottons and
synthetics.
The washing time will be prolonged according to the
cycle temperature and the fabric type.
EASY IRON: selecting this button the laundry is
gently washed and spun to avoid any creasing. In
this way ironing is easier. Furthermore the machine
will perform 6 rinses instead of 3 for cotton and 4
rinses instead of 3 for synthetics . This function
can be used for cotton and synthetic fabrics. If
this option is selected for cotton programmes, the
spin speed automaticaly will reduce to 1000 rpm.
ENERGY SAVING: this option can be selected
only for synthetics lightly or normally soiled with a
temperature of 40°C or higher. The washing time will
be prolonged. If you select 60°C-50°C-40°C, the
washing temperature will be reduced to 42°C.
MENU:
Menu option is used for selecting various basic
settings without affecting the particular wash
programme. These basic settings will remain active
until they are deselected/modified.
To move through the different Menu settings use the
«Options» button.
1-25 ES Mac64.indd 101-25 ES Mac64.indd 10 3/4/06 12:45:39 AM3/4/06 12:45:39 AM
11
ENGLISH
11
MEMORY
Programme settings that are frequently used can be
saved (e.g. cotton, 95°C, 1200 rpm, with time saving).
There are 2 memory spaces available for this
purpose. The saved programme can be selected in
the same way as any other wash programme by
means of the selector dial.
Example: Cotton , 95°C, 1200 rpm, with Time saving.
1. Select the cycle and programme settings.
2. Enter the Menu option and select one of the
memory positions. A «Store programme?»
message will appear in the display.
3. To memorise the selected programme press the
«Change» button. «Stored» message will appear
in the display.
To change the memorized programme setting repeat
the procedure from the beginning.
SOUND
The sound setting permits you to modify the volume of
the sound emitter. You can choose between different
levels: low, no sound and normal.
Change
Options
Exit
Programme Stored
Temp. Spin
Change
Options
Exit
Memory 1
Store programme?
B
B
Temp. Spin
Change
Options
Exit
Setup
A
A
Temp. Spin
Change
Options
Exit
Cotton
Cycle end at
08.30
10.55
60°C 1400
Temp. Spin
Example:
1. Enter the Menu option and select the sound
setting.
2. Use the «Change» button to select the desired
level.
RINSE +
The washing machine is set such that its water
consumption is extremely economical. For people with
allergies and in areas where the water is very soft, it
can however be helpful to use more water when
rinsing. When you select RINSE +, 2 additional rinses
will be carried out for cottons and 1 additional rinse for
synthetics, delicates and silk items. If RINSE + has
been selected, will appear in the option row.
l
Change
Options
Exit
Einstellungen
B
Temp. Spin
Change
Options
Exit
Sprache
DEUTCH
A
Temp. Spin
Change
Options
Exit
Extra Rinse
Yes 10.55
Temp. Spin
Change
Options
Exit
Extra Rinse
No 10.55
Temp. Spin
Change
Options
Exit
Sound
Low or No Sound
Temp. Spin
Change
Options
Exit
Sound
Normal
Temp. Spin
1-25 ES Mac64.indd 111-25 ES Mac64.indd 11 3/4/06 12:45:40 AM3/4/06 12:45:40 AM
12
12
LANGUAGE
You can change the language setting if you would like
the indicators in the display to appear in a different
language.
Example:
1. Enter the Menu option and select the Language
setting.
2. Press the «Change» button to select the desired
Language.
CLOCK
The clock setting option permits you to set the
current time in the memory. It is important to set it
correctly as the display indicates the cycle end time
when you select a programme (refer item 3).
To set the current time of day:
1.Turn the power ON and select any Programme.
(E.g. Cotton)
2.Press the <<OPTIONS>> button repeatedly until
“Setup” appears in the display.
3.Press the <<CHANGE>> button to select the
“Setup” function.
4.Press the <<OPTIONS>> button repeatedly until
“Clock: Set Time” appears in the display.
5.Set the time by pressing the <<CHANGE>> button.
A short press will advance the time by 1 minute.Hold
the << CHANGE>> button down and the time will
advance in 10 minute increments.
6.Press the << EXIT>> button.
Change
Options
Exit
Clock
Set Time
14.46
B
B
Temp. Spin
Change
Options
Exit
Clock
Set Time
14.45
A
A
Temp. Spin
Change
Options
Exit
Language
ENGLISH
Temp. Spin
CONTRAST
The Contrast setting allows you to modify the optical
characteristic of the display.
Example:
1. Enter the Menu option and select the Contrast
setting.
2. Use the «Change» button to set up the desired
contrast level.
BRIGHTNESS
The Brightness setting allows you to modify the
backlight intensity of the display.
Example:
1. Enter the Menu option and select the Brightness
setting.
2. Use the "Change"button to set up the desired
brightness level.
Note:
At the end of the programme if no button is pressed
for approximately 10 minutes the backlight intensity
goes off.
Change
Options
Exit
Brightness
B
Temp. Spin
Change
Options
Exit
Brightness
A
Temp. Spin
Change
Options
Exit
Contrast
B
Temp. Spin
Change
Options
Exit
Contrast
A
Temp. Spin
Change
Options
Exit
Sprache
DEUTCH
A
Temp. Spin
Change
Options
Exit
Einstellungen
B
Temp. Spin
1-25 ES Mac64.indd 121-25 ES Mac64.indd 12 3/4/06 12:45:40 AM3/4/06 12:45:40 AM
13
ENGLISH
13
7.Start/Add Clothes button
This button has 2 functions:
Start: after you have selected the desired
programme and options, press this button to
start the washing machine. The light close to the
button will stop flashing and remain lit.
If you have selected a delay time option, the
countdown will begin and will be shown on the
display.
Pause: When you press this button again,
the programme in progress is interrupted . The
light close to the button will start flashing. To
restart the programme, press the button again.
When you press “Start/ Add clothes” button, it
becomes possible to open the door if:
the washing machine is not in the heating phase;
the level of the water is not high;
the drum is not turning.
Important! You must pause the washing machine
before you make any change in the programme in
progress, by pressing “Start/ Add clothes” button.
1-25 ES Mac64.indd 131-25 ES Mac64.indd 13 3/4/06 12:45:41 AM3/4/06 12:45:41 AM
14
14
Washing hints
Sorting the laundry
Follow the wash code symbols on each garment
label and the manufacturer’s washing instructions.
Sort the laundry as follows:
whites, coloureds, synthetics, delicates, woollens.
Temperatures
90°-95° for normally soiled white cottons and linen
(e.g. tea cloths, towels, tablecloths,
sheets...)
50°-60° for normally soiled, colour fast garments
(e.g. shirts, night dresses, pyjamas....) in
linen, cotton or synthetic fibres and for
lightly soiled white cotton (e.g. underwear).
0 (cold) for delicate items (e.g. net curtains), mixed
30°-40° laundry including synthetic fibres and
woollens bearing the label «pure new
wool, machine washable, non-shrink».
Before loading the laundry
Never wash whites and coloureds together. Whites
may lose their “whiteness” in the wash.
New coloured items may run in the first wash; they
should therefore be washed separately the first time.
Make sure that no metal objects are left in the
laundry (e.g. hair clips, safety pins, pins).
Button up pillowcases, close zip fasteners, hooks
and poppers. Tie any belts or long tapes.
Remove persistent stains before washing. Rub
particularly soiled areas with a special detergent or
detergent paste.
Treat curtains with special care. Remove hooks or tie
them up in a bag or net.
Maximum loads
Recommended loads are indicated in the
programme charts.
General rules:
Cotton, linen: drum full but not too tightly packed;
Synthetics: drum no more than half full;
Delicate fabrics and woollens: drum no more than
one third full.
Washing a maximum load makes the most efficient
use of water and energy.
For heavily soiled laundry, reduce the load size.
Laundry weights
The following weights are indicative:
bathrobe 1200 g
napkin 100 g
quilt cover 700 g
sheet 500 g
pillow case 200 g
tablecloth 250 g
towels 200 g
tea cloth 100 g
night dress 200 g
ladies’ briefs 100 g
man’s work shirt 600 g
man’s shirt 200 g
man’s pyjamas 500 g
blouse 100 g
men’s underpants 100 g
Removing stains
Stubborn stains may not be removed by just water
and detergent. It is therefore advisable to treat them
prior to washing.
Blood: treat fresh stains with cold water. For dried
stains, soak overnight in water with a special
detergent then rub in the soap and water.
Oil based paint: moisten with benzine stain
remover, lay the garment on a soft cloth and dab the
stain; treat several times.
Dried grease stains: moisten with turpentine, lay
the garment on a soft surface and dab the stain with
the fingertips and a cotton cloth.
Rust: oxalic acid dissolved in hot water or a rust
removing product used cold. Be careful with rust
stains which are not recent since the cellulose
structure will already have been damaged and the
fabric tends to hole.
Mould stains: treat with bleach, rinse well (whites
and fast coloureds only).
Grass: soap lightly and treat with bleach (whites and
fast coloureds only).
Ball point pen and glue: moisten with acetone (*),
lay the garment on a soft cloth and dab the stain.
Lipstick: moisten with acetone as above, then treat
stains with methylated spirits. Remove any residual
marks from white fabrics with bleach.
Red wine: soak in water and detergent, rinse and
treat with acetic or citric acid, then rinse. Treat any
residual marks with bleach.
1-25 ES Mac64.indd 141-25 ES Mac64.indd 14 3/4/06 12:45:42 AM3/4/06 12:45:42 AM
15
ENGLISH
15
Ink: depending on the type of ink, moisten the fabric
first with acetone (*), then with acetic acid; treat any
residual marks on white fabrics with bleach and then
rinse thoroughly.
Tar stains: first treat with stain remover, methylated
spirits or benzene, then rub with detergent paste.
(*) do not use acetone on artificial silk.
Detergents and additives
Good washing results also depend on the choice of
detergent and use of the correct quantities to avoid
waste and protect the environment. Although
biodegradable, detergents contain substances
which, in large quantities, can upset the delicate
balance of nature.
The choice of detergent will depend on the type of
fabric (delicates, woollens, cottons, etc.), the colour,
washing temperature and degree of soiling.
Only low suds frontload washing detergents should
be used in this appliance:
– powder detergents for all types of fabric,
– powder detergents for delicate fabrics (60°C max)
and woollens,
– liquid detergents, preferably for low temperature
wash programmes (60°C max) for all types of
fabric, or special for woollens only.
The detergent and any additives must be placed in
the appropriate compartments of the dispenser
drawer before starting the wash programme.
If using concentrated powder or liquid detergents, a
programme without prewash must be selected.
The washing machine incorporates a recirculation
system which allows an optimal use of the
concentrated detergent.
Pour liquid detergent into the dispenser drawer
compartment marked just before starting the
programme.
Any fabric softener or starching additives must be
poured into the compartment marked before
starting the wash programme.
Follow the product manufacturer’s recommendations
on quantities to use and do not exceed the «MAX»
mark in the detergent dispenser drawer.
Quantity of detergent to be used
The type and quantity of detergent will depend on
the type of fabric, load size, degree of soiling and
hardness of the water used.
Water hardness is classified in so-called “degrees” of
hardness. Information on hardness of the water in
your area can be obtained from the relevant water
supply company, or from your local authority.
Follow the product manufacturers’ instructions on
quantities to use.
Use less detergent if:
– you are washing a small load,
– the laundry is lightly soiled,
– large amounts of foam form during washing.
1-25 ES Mac64.indd 151-25 ES Mac64.indd 15 3/4/06 12:45:43 AM3/4/06 12:45:43 AM
16
16
International wash code symbols
These symbols appear on fabric labels, in order to help you choose the best way to treat your laundry.
Energetic wash
Delicate wash
Max. wash
temperature
95°C
Max. wash
temperature
60°C
Max. wash
temperature
40°C
Max. wash
temperature
30°C
Hand wash Do not
wash
at all
Bleaching Bleach in cold water Do not bleach
Ironing Hot iron
max 200°C
Warm iron
max 150°C
Lukewarm iron
max 110°C
Do not iron
Dry cleaning Dry cleaning
in all solvents
Dry cleaning in
perchlorethylene,
petrol, pure alcohol,
R 111 & R 113
Dry cleaning
in petrol,
pure alcohol
and R 113
Do not
dry clean
Drying Flat On the line On clothes
hanger
Tumble dry
high
temperature
low
temperature
Do not
tumble dry
95 60 40
30
60
40 40
30
1-25 ES Mac64.indd 161-25 ES Mac64.indd 16 3/4/06 12:45:44 AM3/4/06 12:45:44 AM
17
17
4. Switch the machine ON
Turn the selector dial to the desired programme to
switch the appliance on.
To switch the appliance off turn it to «Off».
Switching the appliance for the first time.
LANGUAGE
When switching on the appliance for the first time
you must set the language in which you want the
indicators in the display to appear.
Important!
If the display is not showing any language, the
appliance has already been switched on once. In
such case, go to the chapter «Change language» if
you would like to change the language setting.
Please refer page 12.
Operating sequence
Before washing your first load of laundry, we
recommend that you run a cotton cycle at 60°C, with
the machine empty, in order to remove any
manufacturing residue from the drum and tub.
Pour half a measure of detergent into the main wash
compartment and start up the machine.
1. Place the laundry in the drum
Open the door.
Place the laundry in the drum, one item at a time,
shaking them out as much as possible.
Close the door.
2. Measure out the detergent
Pull out the dispenser drawer until it stops. Measure
out the amount of detergent recommended by the
manufacturer in a graduated cup and pour it into the
main wash compartment .
If you wish to carry out a programme with prewash,
pour detergent into the appropriate compartment
marked .
3. Measure out the additives
If required, pour fabric softener into the compartment
marked without exceeding the «MAX» mark.
C0117
C0116
P0004
1-25 ES Mac64.indd 171-25 ES Mac64.indd 17 3/4/06 12:45:44 AM3/4/06 12:45:44 AM
18
18
SETTING THE TIME
You should set the time prior to the first wash and
when changing to and from daylight savings time.
See «Clock setting», Menu on page 12.
5. Select the desired
programme/fabric
Turn the selector dial, in order to select the desired
programme/fabric. The relevant message will appear
in the display.
The display will show the END CYCLE TIME of the
selected programme, calculated on the basis of the
maximum load for each type of fabric. The Start/Add
clothes button light will start flashing.
If the load of laundry to be washed is small, at the
beginning of the cycle the display will still indicate the
END CYCLE relevant to the maximum load. The
duration value will be gradually adjusted during the
execution of the cycle.
6. Select the temperature
Press the TEMPERATURE button if you wish to
select a temperature value different from the one
proposed by the washing machine.
The message of the maximum available temperature
appears on the second row of the display (instead of
«cycle end at»). In the corner of the third row
appears the indication of the selected temperature.
Change
Options
Exit
COTTON
MAX 95°C
08.30
10.55
40°C 1400
Temp. Spin
Change
Options
Exit
Cotton
Cycle and at
08.30
10.55
60°C 1400
Temp. Spin
7. Select the Spin Speed “Spin”, the
Rinse Hold or Night cycle .
Press the SPIN SPEED button repeatedly, in
order to select the desired spin speed or No Spin «O»
or the Rinse Hold or the Night Cycle options.
The relevant message will appear on the second row
of the display. The selected spin level will be shown on
the third row next to the spin button.
If you select the Rinse Hold or Night Cycle options,
the machine will stop at the end of the programme with
the water still in the tub.
8. Select the desired options
Depress the relevant buttons to select the required
options.
Depending on the selected programme only
certain options are available and shown during the
selection phase.
Note: Not all the options are compatible between
themselves. The uncompatible option icons will
disappear.
9. Select the DELAY TIME
Before you start the programme, if you wish the
starting to be delayed, choose the DELAY option.
The selected delay time value (up to 20 hours) will
appear on the display while selecting.
The end cycle will be updated and shown on the
relative position of the display.
Change
Options
Exit
Delay Start
Start in 30 min 11.25
Temp. Spin
Change
Options
Exit
Delay Start
No 10.55
Temp. Spin
Change
Options
Exit
COTTON
MAX 1400
08.30
10.55
1200
40°C
Temp. Spin
1-25 ES Mac64.indd 181-25 ES Mac64.indd 18 3/4/06 12:45:45 AM3/4/06 12:45:45 AM
19
19
10. Start the programme
Press the Start/Add clothes button. The relevant light
will stop flashing. The message relevant to the phase
that is in progress will be shown in the display.
If you have chosen a delayed start, the washing
machine will begin the countdown.
11. How to change a programme
during its cycle
Before you make any change, you must pause the
washing machine by pressing the Start/Add clothes
button .
It is possible to change any phase before the
programme carries it out.
When the programme has started, you can only
reset it by turning the programme selector dial to
off« » and then you can select the new
programme. The washing water remains in the
tub.Start the new programme by depressing the
Start/Add clothes button .
Note: To drain the water before starting the new
cycle you have to cancel the programme and select
the DRAIN cycle.
12. Cancelling a programme
Turn the selector dial to off« » to cancel a
programme which is running. Now you can select a
new programme.
13.How to open the door during
the cycle of a programme
You can open the door, after having set the washing
machine to PAUSE phase, by pressing Start/Add
clothes button provided the following conditions
exist:
1) the washing machine is not in the heating phase
beyond 55°C
2) the level of the water is not high;
3) the drum is not turning.
Change
Options
Exit
COTTON
Washing
08.30
12.00
40°C 1200
Temp. Spin
If these requirements are met, when you pause the
washing machine, the relevant message appears in
the display, the door locked light goes out and the
door can be opened.
Should it not be possible to open the door, the door
locked light is on should it be absolutely necessary to
do so, switch the machine off by turning the selector
dial on " " position.
After approximately 3 minutes, you can open the
door.
Pay attention to the level and temperature of the
water in the washing machine!
14. End of programme
At the end of the programme, the washing machine
stops automatically, gives an audible signal (if option
no sound has not been selected), and displays the
relevant message.
If you had selected the RINSE HOLD or NIGHT
CYCLE option, the Start/Add clothes button light
is off and the door locked light is on.
To drain or spin first turn the programme selector dial
to off« » and then to drain programme or
spin / delicate spin programme.
Release of the lock is also indicated by the coming
on of the message "Door openable" (cycle ended)
and the going out of the door locked light.
Turn the programme selector dial to off« » to
switch the machine off.
Remove the laundry from the washing machine.
Check whether the drum is completely empty, by
rotating it with your hand. The purpose of this is to
prevent any items of laundry from remaining
accidentally in the drum, where they might get
damaged in a subsequent wash (e.g. by shrinking) or
bleed colour into another load of laundry.
We advise you to close the water supply tap and
disconnect the plug from the socket.
Leave the door ajar in order to air the washing
machine.
1-25 ES Mac64.indd 191-25 ES Mac64.indd 19 3/4/06 12:45:46 AM3/4/06 12:45:46 AM
20
20
Wash programmes
Fabrics
Type of Laundry
Description of
Programme
Availble
options
Max.
Load
*This programme at 60°c is the reference program for the energy label according to EEC directive 92/75
Programme table
Washing Programmes
Cottons
Cottons 45
Cottons
Economy
Synthetic
Delicate
Wool
Handwash
Silk
Mini programme
30
White and coloured
cotton e.g Sheets,
tablecloths,
household linen
White and coloured
cotton
White and coloured
cotton Economy*:
e.g. shirts,blouses,
underwear,towels,
house-hold linen
Synthetic fabrics:
e.g.shirts,blouses,
Delicates like pillow
covers and curtains
Special programmes
for hand washing
fabrics.
Clothes labelled
“Pure new wool,
non-shrink machine
washable” and silk
fabric.
Silk
Blankets
Main wash at
O(cold)-95°C
3 rinses
Long spin
Main wash at 60°C
3 rinses
Long spin
Main wash at
40°-60°C
3 rinses
Long spin
Main wash at
O(cold)-60°C
3 rinses
Short spin
Main wash at
O(cold)-40°C
3 rinses
Short spin
Main wash at
O(cold)-40°C
3 rinses
Short spin
Main wash at
O(cold)-40°C
3 rinses
Short spin
Main wash at
30°C
3 rinses
Short spin
Main wash at
30°C
3 rinses
Short spin
8 kg
4.5 kg
8 kg
3.5 kg
3.5 kg
2 kg
2 kg
1 kg
4.5 kg
1-25 ES Mac64.indd 201-25 ES Mac64.indd 20 3/4/06 12:45:47 AM3/4/06 12:45:47 AM
/