Pipe Decor 360 KITHOOK1 Operating instructions

Tools & Supplies needed:

Pipe wrench

1. Use gloves to protect your hands. Clean all parts

with the wipes and immediately dry with lint-free rag.

2. Use a lint-free rag to apply metal polish to the parts.

3. Allow the metal polish to dry and then bu to clean.

VERY IMPORTANT: These are all authentic malleable

iron and require necessary cleaning and

prepping; do not skip this step.

Prepping the pipe:

Gloves

(optional)

lint-free rag

HEAVY DUTY

DEGREASING

WIPES

heavy duty

degreasing wipes

Metal

Polish

metal polish

Thread

lock

thread locker

(recommended)