Mircom LT-1104 Double Action to Single Action Conversion Operating instructions

Mircom
Brand
Mircom
Model
LT-1104 Double Action to Single Action Conversion
Type
Operating instructions

Mircom LT-1104 Double Action to Single Action Conversion

The Mircom LT-1104 Double Action to Single Action Conversion is a device that allows you to convert a double action manual station to a single action manual station. This can be useful if you want to change the way that your manual station operates, or if you need to replace a damaged double action manual station with a single action manual station.

The LT-1104 is easy to install. Simply unlock and open the manual station, remove the smaller two screws and accompanying brackets fastening the PUSH bar, and then tilt the manual station towards you to remove the PUSH bar. Once the PUSH bar is removed, you can install the LT-1104 in its place.

Mircom LT-1104 Double Action to Single Action Conversion

The Mircom LT-1104 Double Action to Single Action Conversion is a device that allows you to convert a double action manual station to a single action manual station. This can be useful if you want to change the way that your manual station operates, or if you need to replace a damaged double action manual station with a single action manual station.

The LT-1104 is easy to install. Simply unlock and open the manual station, remove the smaller two screws and accompanying brackets fastening the PUSH bar, and then tilt the manual station towards you to remove the PUSH bar. Once the PUSH bar is removed, you can install the LT-1104 in its place.

LT-1104 Rev.0
Steps for Converting a Double Action Station to a Single Action Station
1. Using a key supplied with the station, unlock and open the manual station.
2. Looking at the interior of the manual station, remove the smaller two screws and
accompanying brackets fastening the PUSH bar.
3. To easily remove the PUSH bar, hold the manual station vertically with one hand
with the keyhole at the bottom. Tilt the manual station towards you and the PUSH
bar should be easily accessible for removal.
Converting Double Action Manual Stations to Single Action Instructions
Screw s
LT-1104 Rev.0
Steps for Converting a Double Action Station to a Single Action Station
1. Using a key supplied with the station, unlock and open the manual station.
2. Looking at the interior of the manual station, remove the smaller two screws and
accompanying brackets fastening the PUSH bar.
3. To easily remove the PUSH bar, hold the manual station vertically with one hand
with the keyhole at the bottom. Tilt the manual station towards you and the PUSH
bar should be easily accessible for removal.
Converting Double Action Manual Stations to Single Action Instructions
Screw s
LT-1104 Rev.0
Steps for Converting a Double Action Station to a Single Action Station
1. Using a key supplied with the station, unlock and open the manual station.
2. Looking at the interior of the manual station, remove the smaller two screws and
accompanying brackets fastening the PUSH bar.
3. To easily remove the PUSH bar, hold the manual station vertically with one hand
with the keyhole at the bottom. Tilt the manual station towards you and the PUSH
bar should be easily accessible for removal.
Converting Double Action Manual Stations to Single Action Instructions
Screw s
LT-1104 Rev.0
Steps for Converting a Double Action Station to a Single Action Station
1. Using a key supplied with the station, unlock and open the manual station.
2. Looking at the interior of the manual station, remove the smaller two screws and
accompanying brackets fastening the PUSH bar.
3. To easily remove the PUSH bar, hold the manual station vertically with one hand
with the keyhole at the bottom. Tilt the manual station towards you and the PUSH
bar should be easily accessible for removal.
Converting Double Action Manual Stations to Single Action Instructions
Screw s
  • Page 1 1

Mircom LT-1104 Double Action to Single Action Conversion Operating instructions

Mircom
Brand
Mircom
Model
LT-1104 Double Action to Single Action Conversion
Type
Operating instructions

Mircom LT-1104 Double Action to Single Action Conversion

The Mircom LT-1104 Double Action to Single Action Conversion is a device that allows you to convert a double action manual station to a single action manual station. This can be useful if you want to change the way that your manual station operates, or if you need to replace a damaged double action manual station with a single action manual station.

The LT-1104 is easy to install. Simply unlock and open the manual station, remove the smaller two screws and accompanying brackets fastening the PUSH bar, and then tilt the manual station towards you to remove the PUSH bar. Once the PUSH bar is removed, you can install the LT-1104 in its place.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents