FAQ
Bar’s Products, 10386 N. Holly Rd., Holly MI 48442 USA
E-mail: info
@
bars
p
roducts.com Web: www.barsleaks.com Phone:
(
800
)
345-6572
FREQUENTLY ASKED QUESTIONS
BAR’S LEAKS TRANSMISSION REPAIR
P/N 1400
How does Bar’s Leaks Transmission Repair work?
After time, transmission seals tend to dry out and shrink and internal parts become worn. Bar’s Leaks
Transmission Repair reduces rough shifting and friction, while eliminating slip, controlling temperature,
and repairing shudder, chatter and whining. Premium high mileage formula restores transmission
performance.
Will Bar’s Leaks Transmission Repair work in all types of transmission fluid?
Yes, Bar’s Leaks Transmission Repair is formulated to work in all types of transmission fluid. Use in
regular automatic transmissions. Do not use in CVT transmissions.
How much do I install?
One bottle of Bar’s Leaks Transmission Repair, 16 oz. part number 1400, treats 8 to 12 quarts of
transmission fluid.
If first application does not completely stop my problem, may I add another bottle?
In transmissions with seriously damaged components a second treatment may be required. In this
case, it is suggested that the transmission fluid and filter be changed and a second application of
Transmission Repair be added.
If I install more than the required amount, will it work faster or better?
No, we have formulated our product to work best at the suggested dosage amount.
How long does it take to start working?
Bar’s Leaks Transmission Repair starts working the minute you install and start driving the vehicle.
You will usually see results in about 100 miles or two (2) days of driving.
Transmission Repair Continued Page | 2
Bar’s Products, 10386 N. Holly Rd., Holly MI 48442 USA
E-mail: [email protected] Web: www.barsleaks.com Phone: (800)345-6572
Can I add to my existing transmission fluid?
Yes, follow these steps:
1. Remove transmission dipstick and check fluid level. For most vehicles this is usually done while the
engine is running and the transmission is in Park. Tip: The transmission dipstick is usually located near
the engine of dipstick but further back into the engine compartment. Some vehicles do not have a
normal dipstick. For those, the product has to be added to the transmission through a fill plug. Consult
owner’s manual for location.
2. If fluid is low, pour entire contents of the two chamber bottle into the dipstick tube. Do NOT overfill.
Tip: If necessary, to prevent overfill, drain some fluid from transmission.
3. Check fluid level again. Top off with manufacturer’s recommended transmission fluids as needed.
4. Replace dipstick and drive 10 to 15 minutes to circulate fluid.
.
-
1
-
2
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
Other documents
-
Rislone 4502 User manual
-
Regal 3760 Owner's manual
-
CFMoto CFORCE 600 Owner's manual
-
CFMoto UFORCE 1000 Owner's manual
-
-
-
-
-
-
