DUROGREEN TAC8020SETNY Operating instructions

Hello! I am an AI chatbot trained to assist you with the DUROGREEN TAC8020SETNY Operating instructions. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!

MAKE SURE LOWER BACK SUPPORT

IS IN THE FORWARD POSITION

FOR UPRIGHT ASSEMBLY

INSERT PIN FOR ASSEMBLY, BOTH SIDES.

X 2

4" X 2 Adirondack Pin

PARTS

DO NOT

REMOVE

SCREWS

REMOVE PINS

FOR FOLDING

FOLDED POSITION FOR STORAGE

ASSEMBLY FOR UPRIGHT POSITION

Step 1:

Lay tabletop upside down

and attach side assemblies using (4) 2-

4 screws

Note: Do not fully tighten screws

Step 2:

Loosely attach braces using the remaining (4) 2-

4 screws

Next, turn table upright and tighten all screws

Tools needed:

Phillips screwdriver

(8)

4-20 x 2-

4 screws (included)