DUROGREEN TAC8020SETBR Operating instructions

MAKE SURE LOWER BACK SUPPORT

IS IN THE FORWARD POSITION

FOR UPRIGHT ASSEMBLY

INSERT PIN FOR ASSEMBLY, BOTH SIDES.

X 2

4" X 2 Adirondack Pin

PARTS

DO NOT

REMOVE

SCREWS

REMOVE PINS

FOR FOLDING

FOLDED POSITION FOR STORAGE

ASSEMBLY FOR UPRIGHT POSITION

Step 1:

Lay tabletop upside down

and attach side assemblies using (4) 2-

4 screws

Note: Do not fully tighten screws

Step 2:

Loosely attach braces using the remaining (4) 2-

4 screws

Next, turn table upright and tighten all screws

Tools needed:

Phillips screwdriver

(8)

4-20 x 2-

4 screws (included)