TP-LINK Archer CR500 User manual

Category
Routers
Type
User manual

This manual is also suitable for

REV2.0.0 1910011852
User Guide
AC1750 Wireless Dual Band DOCSIS 3.0
Cable Modem Router
Archer CR700
Contents
About This Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1
Chapter 1. Get to Know Your Modem Router . . . . . . . . . . . . . . . . . . . . . . . . .2
1. 1. Product Overview. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
1. 2. Product Appearance. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
1. 2. 1. Front Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
1. 2. 2. Back Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Chapter 2. Quick Start . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
2. 1. Position Your Modem Router . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
2. 2. Connect Your Modem Router . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
2. 3. Activate Your Modem Router. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Chapter 3. Log In to Your Modem Router . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Chapter 4. Conī†®gure Internet Connections. . . . . . . . . . . . . . . . . . . . . . . . 12
4. 1. Set Up an IPv6 Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
4. 2. Test Internet Connectivity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
4. 3. Operation Modes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
4. 3. 1. Bridge Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Chapter 5. Network Security . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
5. 1. Control Clientsā€™ Access . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
5. 1. 1. Wireless MAC Filtering. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
5. 1. 2. Deny Access By IP Address. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
5. 1. 3. Deny Access By MAC Address. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
5. 1. 4. Deny Access By Port Number. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
5. 1. 5. Allow Access By Passthrough Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
5. 2. Use Firewall. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
5. 3. Email Local Log . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
5. 4. Record Log in a Remote Server . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Chapter 6. USB Settings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
6. 1. Local Storage Sharing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
6. 1. 1. Access the USB Disk . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
6. 1. 2. Customize Your Settings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
6. 2. Remote Access via FTP Server. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
6. 2. 1. Access the USB Disk . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
6. 2. 2. Customize Your Settings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
6. 3. Media Sharing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
6. 3. 1. Access the USB Disk . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
6. 3. 2. Customize Your Settings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
6. 4. Printer Sharing. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
Chapter 7. Parental Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
Chapter 8. Guest Network. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
8. 1. Create a Network for Guests . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50
8. 2. Customize Guest Network Options. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50
Chapter 9. NAT Forwarding. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
9. 1. Share Local Resources in the Internet by Port Forwarding . . . . . . . . . . . . . . . . . . . 53
9. 2. Open Ports Dynamically by Port Triggers. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54
9. 3. Free Applications from Port Restriction by DMZ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56
Chapter 10. Specify Your Network Settings. . . . . . . . . . . . . . . . . . . . . . . . . 57
10. 1. Internet Settings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58
10. 2. LAN Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58
10. 2. 1. Change the LAN IP Address . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58
10. 2. 2. Use the Modem Router as a DHCP Server. . . . . . . . . . . . . . . . . . . . . . . . . . . 59
10. 3. Wireless Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60
10. 3. 1. Specify Basic Wireless Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60
10. 3. 2. Use WPS for Wireless Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62
10. 3. 3. View Wireless Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64
10. 3. 4. Advanced Wireless Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64
10. 4. Set Up a Dynamic DNS Service Account . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66
Chapter 11. Administrate Your Network . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67
11. 1. View Basic Information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68
11. 1. 1. View System Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68
11. 1. 2. View Device Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68
11. 1. 3. View Connection Status . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68
11. 2. Set System Time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70
11. 3. Back up and Restore Conī†®guration Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71
11. 4. Change the Administrator Account. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72
11. 5. Remote Management . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73
11. 6. System Log. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73
Appendix: Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75
1
About This Guide
This guide is a complement to Quick Installation Guide. The Quick Installation Guide
instructs you on quick Internet setup, and this guide provides details of each function
and shows you the way to configure these functions appropriate to your needs.
When using this guide, please notice that features of the router may vary slightly
depending on the model and software version you have, and on your location, language,
and Internet service provider. All screenshots, images, parameters and descriptions
documented in this guide are used for demonstration only.
Conventions
In this guide, the following conventions are used:
Convention
Description
Teal Underlined
Hyperlinks are teal underlined. You can click to redirect to a website or a
specific section.
Teal
Contents to be emphasized and texts on the web page are in teal, including
the menus, items, buttons, etc.
>
The menu structures to show the path to load the corresponding page.
For example, Advanced > Wireless 2.4GHz > MAC Filtering
means the MAC
Filtering function page is under the Wireless 2.4GHz menu that is located in
the Advanced tab.
Note:
Ignoring this type of note might result in a malfunction or damage to the
device.
Tips:
Indicates important information that helps you make better use of your
device.
Symbols on
the web page
ā€¢
click to edit the corresponding entry.
ā€¢
click to delete the corresponding entry.
ā€¢
click to enable or disable the corresponding entry.
More Info
ā€¢ The latest software, management app and utility can be found at Download Center at
http://www.tp-link.com/support.
ā€¢ The Quick Installation Guide (QIG) can be found where you find this guide or inside the
package of the router.
ā€¢ Specifications can be found on the product page at http://www.tp-link.com.
ā€¢ A Technical Support Forum is provided for you to discuss our products at
http://forum.tp-link.com.
ā€¢ Our Technical Support contact information can be found at the Contact Technical
Support page at http://www.tp-link.com/support.
Chapter 1
Get to Know Your Modem
Router
This chapter introduces the modem router and shows its appearance.
This chapter contains the following sections:
ā€¢ Product Overview
ā€¢ Product Appearance
3
Chapter 1
Get to Know Your Modem Router
1. 1. Product Overview
TP-LINKā€™s Cable Modem Router is a combined wired/wireless network connection
device with integrated wireless router and DOCSIS 3.0 modem, reducing hassle of
configuration and saving space.
With Ethernet ports and antennas, the modem router provides wired and wireless
access for multiple computers and mobile devices.
With various features and functions, the modem router is the perfect hub of your home
or business network.
1. 2. Product Appearance
1. 2. 1. Front Panel
The front panel provides LEDs. You can check the modem routerā€™s working status by
following the LED Explanation table.
LED Status
Indication
Power
On Power is on.
Off
Power is off. Please ensure that the power adapter is
connected correctly.
4
Chapter 1
Get to Know Your Modem Router
LED Status
Indication
Downstream
Green
The modem router is synchronized with more than one
channel.
White The modem router is synchronized with one channel.
Flashing The modem router is scanning for downstream channels.
Off
The initialization is not started, or has failed. Please refer
to Note 1 for troubleshooting.
Upstream
Green
The modem router is synchronized with more than one
channel.
White The modem router is synchronized with one channel.
Flashing
The modem router is ranging or registering for upstream
channels.
Off
The initialization is not started, or has failed. Please refer
to Note 1 for troubleshooting.
Internet
On
The network is available with a successful Internet
connection.
Off
No successful Internet connection is available. Please
refer to Note 2 for troubleshooting.
Flashing The modem router is initializing.
LAN
On At least one LAN port is connected.
Off No LAN port is connected.
Wireless
On The wireless network is enabled.
Off The wireless network is disabled.
WPS
On/Off
The LED stays on for 5 minutes when a WPS connection
is established before it turns off.
Flashing
WPS connection is in progress. This may take up to 2
minutes.
USB on the
back panel
On A USB device is detected and ready to use.
Off No USB device is plugged in to the USB port.
Flashing A USB device is being detected.
Note:
1. If the Downstream LED or Upstream LED is off, check your Internet connection first. Refer to Connect Your Modem
Router for more information about how to make Internet connection correctly. If you have already made a right
connection, contact your ISP to make sure your Internet service is available now.
2. If the Internet LED is off, check your Downstream LED and Upstream LED first. If they are also off, please refer to Note
1. If the downstream LED and Upstream LED are ON, check your Internet configuration. You may need to check this
part of information with your ISP and make sure everything have been input correctly.
5
Chapter 1
Get to Know Your Modem Router
1. 2. 2. Back Panel
The back panel provides buttons and connection ports. Refer to the following for
detailed instructions.
Item
Description
Reset Button
With the modem router powered on, use a pin to press and hold the
Reset button for at least 8 seconds. And the modem router will restore
to its factory default settings.
WPS Button Press to start a WPS synchronization.
WiFi ON/OFF
Button
Press to turn the Wi-Fi on or off.
USB1 and USB2
Ports
For connecting to USB storage devices or USB printers.
LAN1, LAN2, LAN3,
and LAN4 Ports
For connecting to your PCs or other Ethernet network devices.
Cable Port For connecting to a coaxial cable.
DC Port
For connecting the modem router to power socket via the provided
power adapter.
Power On/Off
Button
Press to power on or off the modem router.
Chapter 2
Quick Start
This chapter contains the following sections:
ā€¢ Position Your Modem Router
ā€¢ Connect Your Modem Router
ā€¢ Activate Your Modem Router
7
Chapter 2
Quick Start
2. 1. Position Your Modem Router
With the modem router, you can access your network from anywhere within the wireless
network coverage. However, the wireless signal strength and coverage vary depending
on the actual environment of your modem router. Many obstacles may limit the range of
the wireless signal, for example, concrete structures or thick walls.
For your safety and best Wi-Fi performance, please:
ā€¢ Do Not locate the modem router in the place where it will be exposed to moisture or
excessive heat.
ā€¢ Keep away from the strong electromagnetic radiation and the device of electromagnetic
sensitive.
ā€¢ Place the modem router where it can be connected to the various devices as well as
to a power source.
ā€¢ Make sure the cables and power cord are safely placed out of the way to avoid a
tripping hazard.
Tips: The modem router can be placed on a shelf or desktop.
2. 2. Connect Your Modem Router
Before connecting the device, please make sure your broadband cable service provided
by your ISP is available. If there is any problem, please contact your ISP. Also, keep your
hands dry during connection. Follow the steps below to connect your modem router.
1. Connect the coaxial cable and power adapter to the modem router, then power on
your modem router.
Internet
Coaxial cablePower adapter
8
Chapter 2
Quick Start
2. Wait for about 1 minute until the following LEDs are solid on.
3. Connect your computer to the modem router.
Method 1: Wired
Connect your computerā€™s Ethernet port to a LAN port on the modem router via an
Ethernet cable.
Method 2: Wireless
Connect wirelessly by using the default SSID (Wireless Network Name) and Wireless
Password printed on the product label of the modem router.
Method 3: Use the WPS button
Wireless devices that support WPS, including Android phones, tablets, most USB
network cards, can be connected to your router through this method. (WPS is not
supported by iOS devices.)
Note:
The WPS function cannot be configured if the wireless function of the modem router is disabled. Also, the WPS function
will be disabled if your wireless encryption is WEP. Please make sure the wireless function is enabled and is configured
with the appropriate encryption before configuring the WPS.
1 ) Tab the WPS icon on the deviceā€™s screen.
2 ) Immediately press the WPS button on your modem router.
3 ) The WPS LED flashes for about two minutes during the WPS process.
4 ) When the WPS LED is on, the client device has successfully connected to the
modem router.
9
Chapter 2
Quick Start
2. 3. Activate Your Modem Router
1. Get your Internet service account information and the modem routerā€™s Information
Card ready.
Serial Number
MAC Address
Wi-Fi Password/PIN
SSID
Information Card
2. Make sure your computer is set to dynamically obtain an IP address. If not, refer to
Appendix: Troubleshooting for instructions.
3. Launch a web browser, and visit any website. You will be automatically redirected to
your service providerā€™s self-activation page.
4. Follow the on-screen self-activation instructions to activate the modem router.
If you have any problem activating your modem router, call your ISPā€™s customer
service .
Contact information of major cable ISPs:
Bright House: 1-855-222-0102
Charter: 1-888-438-2427
Comcast: 1-855-OK-BEGIN (1-855-652-3446)
Cox: 1-888-556-1193
Time Warner Cable: 1-888-892-2253
The contact information listed might change. You can also find the contact information in
your monthly Internet service billing statement.
5. After activating your modem router successfully, wait for about 10 minutes till these
LEDs
become solid on, then you can enjoy the Internet.
Note:
1. If you are unable to access the Internet, refer to Appendix: Troubleshooting > T4 for instructions.
2. The product should be connected to cable distribution system that grounded (earthed) in accordance with ANSI/
NFPA 70, the National Electrical Code (NEC), in particular Section 820.93 - Grounding of Outer Conductive Shield of
a Coaxial Cable.
Chapter 3
Log In to Your Modem
Router
11
Chapter 3
Log In to Your Modem Router
With a web management page, it is easy to configure and manage the modem router.
The web management page can be used on any Windows, Macintosh or UNIX OS with a
Web browser, such as Microsoft Internet Explorer, Mozilla Firefox or Apple Safari.
Follow the steps below to log into your modem router.
1. If the TCP/IP Protocol on your computer is set to the static (fixed) IP address,
you need to change it to obtain an IP address automatically. Refer to Appendix:
Troubleshooting > T7 to configure your computer.
2. Launch a web browser and go to http://tplinkmodem.net or http://192.168.1.1. Use
admin for both username and password, then click Log in.
Note: If the login page does not appear, please refer to Appendix: Troubleshooting > T3.
Chapter 4
Configure Internet
Connections
This chapter introduces how to manually configure your Internet settings. Furthermore,
you can also set up an IPv6 connection if your ISP provides IPv6 service.
This chapter includes the following sections:
ā€¢ Set Up an IPv6 Connection
ā€¢ Test Internet Connectivity
ā€¢ Operation Modes
13
Chapter 4
Conī†®gure Internet Connections
4. 1. Set Up an IPv6 Connection
If your ISP has provided a line that supports IPv6 connection as well as some detailed
IPv6 parameters, you can manually set up an IPv6 connection.
Follow the steps below to set up an IPv6 connection:
1. Make sure you have set up an IPv4 connection by referring to Quick Start before
setting up an IPv6 connection.
2. Visit http://tplinkmodem.net, and log in with the username (admin) and password
(admin or the one customized by you).
3. Go to Advanced > Network > IPv6 LAN Settings. In the DHCPv6 Server Settings
section, configure the following parameters provided by your ISP.
ā€¢ DHCPv6 Server: Select the checkbox to enable DHCPv6 server.
ā€¢ Start Address: Enter a value for the DHCPv6 server to start with when issuing IP
addresses.
14
Chapter 4
Conī†®gure Internet Connections
ā€¢ Number of addresses: Enter a value between 0-255 for DHCPv6 server preference.
The default value is 255.
ā€¢ Valid Lifetime: The Valid Lifetime is the amount of time in which a network user will
be allowed connection to the modem router with their current dynamic IP address.
Enter the amount of time, in seconds, then the user will be assigned this dynamic
IP address. After the dynamic IP address has expired, the user will be automatically
assigned a new dynamic IP address. The default is 3600 seconds.
ā€¢ Rapid Commit: Select the checkbox to enable the prefix fast distribution function.
ā€¢ Unicast: Select the checkbox to enable the unicast function. The default setting is
disabled.
ā€¢ Stateless DHCPv6: Stateless DHCPv6 is a combination of ā€œstateless Address
Autoconfigurationā€ and ā€œDynamic Host Configuration Protocol for IPv6ā€ and is
specified by RFC3736. Select the checkbox to enable this function.
4. Click Save to make the settings effective. Now IPv6 service is available for your
network.
4. 2. Test Internet Connectivity
After manually setting up the Internet connection, you need to test the Internet
connectivity. The modem router provides two diagnostic tools to help you locate the
malfunction.
1. Visit http://tplinkmodem.net, and log in with the username (admin) and password
(admin or the one customized by you).
2. Go to Advanced > System Tools > Diagnostics.
15
Chapter 4
Conī†®gure Internet Connections
3. Select Ping or Traceroute as the Diagnostic tool and enter the parameters according
to your needs.
ā€¢ Ping is used to test the connectivity between the router and the tested host,
and measure the round-trip time.
IP Address: Enter the IP address that you want to ping.
Ping Packet Size: Enter the size of the ping packet you want to use.
Ping Count: Enter the number of times you want to ping the target device.
Ping Interval: Enter the time period between each ping.
ā€¢ Traceroute is used to display the route (path) your router has passed to reach
the tested host, and measure transit delays of packets across an Internet
Protocol network.
IP Address/ Domain Name: Enter the IP Address or Domain Name you want to
trace.
Max Hops: Enter the max number of hops.
Data Size: Enter the size of data you want to use.
Base Port: Enter the port number to send packets.
Resolve Host: To resolve the host name to the IP address you can select ON
from the drop-down list. The default status is OFF.
4. Click Start Test to check the connectivity of the Internet. The page will display the
result of diagnosis.
Tips:
1. (For Ping only) Click Abort Test to end the connectivity of the Internet.
2. Click Clear Results to delete the logs.
16
Chapter 4
Conī†®gure Internet Connections
4. 3. Operation Modes
The modem router supports two operation modes: Router Mode and Bridge Mode.
The modem router uses the Router Mode by default, and you can change the mode
according to your needs.
4. 3. 1. Bridge Mode
In this mode, the modem router can be configured to act as a bridging device between
your LAN and your ISP. Bridges are devices that enable two or more networks to
communicate as if they are two segments of the same physical LAN. If you were in
Bridge Mode, change the computer setting to obtain an IP address automatically. You
could log into the web management page at 192.168.100.1.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68
  • Page 69 69
  • Page 70 70
  • Page 71 71
  • Page 72 72
  • Page 73 73
  • Page 74 74
  • Page 75 75
  • Page 76 76
  • Page 77 77
  • Page 78 78
  • Page 79 79
  • Page 80 80
  • Page 81 81
  • Page 82 82
  • Page 83 83
  • Page 84 84
  • Page 85 85
  • Page 86 86
  • Page 87 87
  • Page 88 88

TP-LINK Archer CR500 User manual

Category
Routers
Type
User manual
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI