JONATHAN Y JYL2066A Operating instructions

Type
Operating instructions

JONATHAN Y JYL2066A provides ambient lighting for your home. The lamp has a harp that supports the shade and a finial that secures the shade in place. The lamp's socket accommodates a type "A" bulb with a maximum wattage of 100, a CFL bulb with a maximum wattage of 23, or an LED bulb with a maximum wattage of 12. The lamp comes with a 9-watt LED bulb. To assemble the lamp, connect the neck to the base, insert the harp into the saddle, and place the shade on the harp. Then, tighten the finial into the harp and insert the bulb into the socket.

JONATHAN Y JYL2066A provides ambient lighting for your home. The lamp has a harp that supports the shade and a finial that secures the shade in place. The lamp's socket accommodates a type "A" bulb with a maximum wattage of 100, a CFL bulb with a maximum wattage of 23, or an LED bulb with a maximum wattage of 12. The lamp comes with a 9-watt LED bulb. To assemble the lamp, connect the neck to the base, insert the harp into the saddle, and place the shade on the harp. Then, tighten the finial into the harp and insert the bulb into the socket.

WARNING
INSPECT ITEM CAREFULLY BEFORE ATTEMPTING TO INSTALL. IF THERE IS ANY DAMAGE OR
OBVIOUS DEFECT, DO NOT INSTALL. ITEM MAY NOT BE RETURNED ONCE IT HAS BEEN INSTALLED.
CARE AND MAINTENANCE
Model# JYL2066A
Product Dimensions: 16"Lx 16"W x 33"H
Unplug lamps before using any cleaning solutions. Dust shades with a feather duster or with an appropriate
vacuum-brush attachment. Wipe with a soft, dry cloth and clean lamp bases with the methods appropriate to
the material. Avoid the use of chemicals and household cleaners as they may damage the finish.
NOTICE& IMPORTANT SAFETY INSTRUCTIONS
* Please make sure that you have all parts indicated before you begin assembly of this item
* This item should be assembled on a soft surface to prevent scratching the finish during assembly
* To reduce the risk of fire, electrical shock or injury to persons or property, please follow the guideline below
for safe use and installation
*The external flexible cable or cord of this lamp cannot be replaced;
If the cord is damaged, the lamp shall be destroyed
**This portable lamp has a polarized plug (one blade is wider than the other) as a safety feature to reduce
the risk of electric shock. this plug will fit in a polarized outlet only one way. if the plug does not fit fully in
the outlet, reverse the plug, if it still does not fit, contact a qualified electrician. Never use with an
extension cord unless the plug can be fully inserted. do not attempt to disregard this safety feature.
Part List and Hardware List
PIECE DESCRIPTION PICTURE QUANTITY PIECE DESCRIPTION PICTURE QUANTITY
A.B.C.D Lamp base 1X E Harp 1X
B Neck 1X F Shade 1X
C Saddle 1X G Finial 1X
D Socket 1X H Bulb 1X
PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware
contents list. If any part is missing or damaged, do not attempt to assemble the product.
Estimated Assembly Time: 6 minutes.
PLEASE USE ON/OFF TYPE"A" BULB MAX 100-WATT OR CFL BULB MAX 23-WATT OR LED BULB MAX 12-WATT
THERE IS LED 9-WATT BULB IN THE BOX
Step 1 Step 2 Step 3
Pull power cord to connect the Neck (B) to the Base (A). Insert the Harp (E) into the Saddle (C). Put the light on a level surface to check
Screw the Neck (B) onto the Lamp base (A) Put the shade(F) on the Harp(E),then if everything is stable.
Be careful not to twist the power cord and tighten securely
tighten the Finial (G)into the Harp (E)
Insert the bulb(H) into the socket(D).
ENJOY YOUR LAMP
1
2
3
  • Page 1 1
  • Page 2 2

JONATHAN Y JYL2066A Operating instructions

Type
Operating instructions

JONATHAN Y JYL2066A provides ambient lighting for your home. The lamp has a harp that supports the shade and a finial that secures the shade in place. The lamp's socket accommodates a type "A" bulb with a maximum wattage of 100, a CFL bulb with a maximum wattage of 23, or an LED bulb with a maximum wattage of 12. The lamp comes with a 9-watt LED bulb. To assemble the lamp, connect the neck to the base, insert the harp into the saddle, and place the shade on the harp. Then, tighten the finial into the harp and insert the bulb into the socket.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI