2. Computers & electronics
  3. Audio & home theatre
  4. Supplementary music equipment
  5. Legrand
  6. Grand Concerto

Legrand Grand Concerto, NV-D2120, NV-D460 Installation guide

  • Hello! I am an AI chatbot trained to assist you with the Legrand Grand Concerto Installation guide. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
NV-D460/NV-D2120 External Power Amplifiers
NV-I8GMS / NV-I8GXS Audio Distribution System
Installation Guide
ENGLISH
Danger
Exposure to extremely high noise levels may cause a permanent
hearing loss. Individuals vary considerably to noise induced hearing
loss but nearly everyone will lose some hearing if exposed to sufficiently
intense noise for a sufficient time. The U.S. Government's
Occupational Safety and Health Administration (OSHA) has specified
the following permissible noise level exposures:
According to OSHA, any exposure in the above permissible limits could
result in some hearing loss. Ear plugs or protectors in the ear canal or over
the ears must be worn when operating this amplification system in order to
prevent a permanent hearing loss. If exposure in excess of the limits as
put forth above, to insure against potentially harmful exposure to high
sound pressure levels, it is recommended that all persons exposed to
equipment capable of inducing high sound pressure levels, such as this
amplification system, be protected by hearing protectors while this unit is in
operation.
DURATION PER DAY (HOURS) 8 6 4 3 2 1
SOUND LEVEL (dB) 90 93 95 97 100 103
THIS SYMBOL IS INTENDED TO ALERT THE USER TO THE PRESENCE
OF NON-INSULATED "DANGEROUS VOLTAGE" WITHIN THE
PRODUCT'S ENCLOSURE THAT MAY BE OF SUFFICIENT MAGNITUDE
TO CONSTITUTE A RISK OF ELECTRIC SHOCK TO PERSONS.
THIS SYMBOL IS INTENDED TO ALERT THE USER TO THE PRESENCE
OF IMPORTANT OPERATING AND MAINTENANCE (SERVICING)
INSTRUCTIONS IN THE LITERATUREACCOMPANYING THE UNIT.
1. Readallsafetyandoperatinginstructionsbeforeusingthis
product.
2. Allsafetyandoperatinginstructionsshouldbekeptforfuture
reference.
3. Readandunderstandallwarningslistedontheoperating
instructions.
4. Followalloperatinginstructionstooperatethisproduct.
5. Thisproductshouldnotbeusednearwater,i.e.bathtub,sink,
swimmingpool,wetbasement,etc.
6. Onlyusedryclothtocleanthisproduct.
7. Donotblockanyventilationopenings,Itshouldnotbeplacedflat
againstawallorplacedinabuilt-inenclosurethatwillimpedethe
flowofcoolingair.
8. Donotinstallthisproductnearanyheatsources;suchas,
radiators,heatregisters,stoveorotherapparatus(includingheat
producingamplifiers)thatproduceheat.
9. Donotdefeatthesafetypurposeofthepolarizedorgrounding-
typeplug. A polarizedplughastwobladeswithonewiderthanthe
other. A grounding-typeplughastwobladesandathirdgrounding
prong. Thewidebladeorthethirdprongareprovidedforyour
safety.Iftheprovidedplugdoesnotfitintoyouroutlet,consultan
electricianforreplacementoftheobsoleteoutlet.
10. Protectthepowercordbeingwalkedonorpinched,particularlyat
plugs,conveniencereceptaclesandthepointwheretheyexit
fromtheapparatus.Donotbreakthegroundpinofthepower
supplycord.
11. Onlyuseattachmentsspecifiedbythemanufacturer.
12. Useonlywiththecart,stand,tripod,bracket,ortablespecifiedby
themanufacturerorsoldwiththeapparatus.Whenacartisused,
usecautionwhenmovingcart/apparatuscombinationtoavoid
injuryfromtip-over.
13. Unplugthisapparatusduringlightningstormsorwhenunusedfor
longperiodsoftime.
14. Careshouldbetakensothatobjectsdonotfallandliquidsare
notspilledintotheunitthroughtheventilationportsoranyother
openings.
15. Referallservicingtoqualifiedservicepersonnel.Servicingis
requiredwhentheapparatushasbeendamagedinanyway;
suchas,power-supplycordorplugisdamaged,liquidhasbeen
spilledorobjectshavefallenintotheapparatus,theapparatus
hasbeenexposedtorainormoisture,doesnotoperatenormally
orhasbeendropped.
16. WARNING: Toreducetheriskoffireorelectricshock,donot
exposethisapparatustorainormoisture.
IMPORTANT SAFETY INSTRUCTIONS
TOREDUCE THERISKOFELECTRICSHOCK,DO
NOT REMOVECHASSIS.NOUSER-SERVICEABLE
PARTSINSIDE.REFERSERVICING TOQUALIFIED
SERVICEPERSONNEL.
AVIS:RISQUEDECHOCELECTRIQUE-NEPASOUVRIR.
CAUTION
APPARATUS SHALL NOT BE EXPOSED TO DRIPPING OR SPLASHING
AND THAT NO OBJECTS FILLED WITH LIQUIDS, SUCH AS VASES,
SHALL BE PLACED ON THE APPARATUS.
FRENCH
DURE EN HEURES PAR JOUR 8 6 4 3 2 1
INIVEAU SONORE CONTINU EN dB 90 93 95 97 100 103
Danger
L‘expositionadesniveauxelevesdebruitpeutprovoqueruneperte
permanentedel’audition,Chaqueorganismehumainreagit
differemmentquantalapertedel’audition,maisquasimenttoutle
mondesubitunediminutiondeI’acuiteauditivelorsd’uneexposition
suffisammentlongueaubruitintense.Lesautoritescompetentesen
reglementationdebruitontdefinilesexpositionstolereesauxniveaux
debruits:
Selonlesautorites,touteexpositiondansleslimitesciteesci-dessus,
peuventprovoquercertainespertesd’audition.Desbouchonsou
protectionsdansl’appareilauditifousurl’oreilledoiventetreporteslors
del’utilisationdecesystemed’amplificationafindeprevenirlerisque
depertepermanentedel’audition,Danslecasd’expositions
superieuresauxlimitespreciteesilestrecommande,afindese
premunircontrelesexpositionsauxpressionsacoustiqueseIevees
potentielIementdangeureuses,auxpersonnesexposeesaux
equipementscapablesdedelivrerdetellespuissances,telsce
systemed’amplificationenfonctionnement,deprotegerl’appareil
auditif.
AFINDELlMlTERLERISQUEDECHOELECTR/QUE,NE
PASENLEVERLECHASSIS.NECONTIENT PASDE
PIECESPOUVANT ETREREPAREEPARL’UTILISATEUR.
CONFERLESERVICE APRES-VENTE AUX
REPARATEURS
ATTENTION
RISQUEDECHOCELECTRIQUE
NEPASOUVRIR.
CE SYMBOLE APOUR BUT D'AVERTIR L'UTILISATEUR DE LA PRESENCE
DE VOLTAGE DANGEREUX NON-ISOLE A L'INTERIEUR DE CE PRODUIT
QUI PEUT ETRE DE PUISSANCE SUFFISAMMENT IMPORTANTE POUR
PROVOQUER UN CHOC ELECTRIQUE AUX PERSONNES.
CE SYMBOLE A POUR BUT D'AVERTIR L'UTILISATEUR DE LA PRESENCE
D'INSTRUCTIONS D'UTILISATION ET DE MAINTENANCE DANS LES
DOCUMENTS FOURNIS AVEC CE PRODUIT.
IMPORTANTESINSTRUCTIONSDESECURITE
1. Lire avec attention toutes les recommandations et précautions
d'emploi avant d'utiliser ce produit.
2. Toutes les recommandations et précautions d'emploi doivent être
conservées afin de pouvoir s'y reporter si nécessaire.
3. Lire et comprendre tous les avertissements énumérés dans les
précautions d'emploi.
4. Suivre toutes les précautions d'emploi pour utiliser ce produit.
5. Ce produit ne doit pas être utilisé près d'eau, comme par exemple
baignoires, éviers, piscine, sous-sol humides ... Etc.
ée, cela
Protéger
pincement, particulièrement au niveau des fiches, des
réceptacles utilisés et à l'endroit de sortie de l'appareil. Ne pas
casser la fiche de terre du cordon d'alimentation.
11. Utiliser uniquement les accessoires spécifiés par le constructeur.
12. Utiliser uniquement avec le chariot de transport, le support, le
trépied, la console ou la table spécifiés par le constructeur ou
vendus avec l'appareil. Lors de l'utilisation d'un chariot, bouger
avec précaution l'ensemble chariotlappareil afin d'éviter les
dommages d'un renversement.
13 Débrancher cet appareil lors d'orages ou s'il n'est pas utilisé
pendant une longue période.
14. Des précautions doivent être prises afin qu'aucun objet ne tombe
et qu'aucun liquide ne se répande à l'intérieur de l'appareil par
les orifics de ventilation ou n'importe quelle autre ouverture.
15. Pour toutes interventions techniques s'adresser à un technicien
qualifié.L'intervention technique est nécessaire lorsque l'appareil
a été endommagé de n'importe quelle façon, comme par
exemple si le cordon secteur ou sa fiche sont détériorés,si du
liquide a coulé ou si des objets sont tombés à l'intérieur de
l'apparei1,si l'appareil a été exposé à la pluie ou à l'humidité, s'il
ne fonctionne pas normalement ou s'il est tombé.
16. ATTENTI0N:Pour réduire le risque d'incendie ou de choc
electrique ne pas exposer l'appareil à la pluie ou à l'humidité.
6. Utiliser exclusivement un chiffon sec pour nettoyer ce produit.
7. Ne bloquér aucune ouverture de ventilation. Ne pas placer le
produit tout contre un mur ou dans une enceinte fern
gênerait le flux d'air nécessaire au refroidissement.
8. Ne pas placer le produit près de toute source de chaeur telle que
radiateurs, arrivées d'air chaud, fourneaux ou autres appareils
générant de la chaleur (incluant les amplificateurs producteurs
de chaleur) .
9. Ne pas négliger la sécurité que procure un branchement polarisé
ou avec raccordement à la terre, Un branchement polarisé
comprend deux fiches dont l'une est plus large que l'autre. Un
branchement à la terre comprend deux fiches plus une troisième
reliée à la terre. Si la fiche secteur fournie ne s'insert pas dans
votre prise de courant. consulter un 'électricien afin de remplacer
votre prise obsolète.
10. le cordon d'alimentation de tout écrasement ou
AFIN DE REDUIRE LES RISQUÉ D'INCENDIE ET DE DECHARGE
ELECTRIQUE, NE PAS EXPOSER CET APPAREILA LA PLUIE OU A
L'HUMIDITE.
TableofContents
Introduction .........................................................................................................................................Page3
GrandConcertoBackPanel ......................................................................................................................Page4
NV-I8GCP2.7” OLEDControlPad .............................................................................................................Page5
NV-E6GCP1” OLEDControlPad ................................................................................................................Page6
NV-CTP36ColorTouchPad ......................................................................................................................Page7
NV-WCPSWirelessControlPad ...............................................................................................................Page8
NV-GRC1RemoteControl ........................................................................................................................Page9
I.CAT5Termination ................................................................................................................................Page10
II.TerminatingSpeakerWire ..................................................................................................................Page11
III.InstallingtheGrandConcertoAmplifier ...............................................................................................Page11
IV.InstallingtheNV-I8GEZPEZPort .........................................................................................................Page11
V.ConnectingtheEZPorttotheGrandConcertoAmplifier ..........................................................................Page12
VI.AttachingAudioSourceEquipment .....................................................................................................Page12
SettinguptheNuVoSourcesforusewithNuVoNet ...........................................................................Page12
VII.ConnectingtheIREmittersforThird-PartySourceComponents ............................................................Page13
VIII.ExpandingGrandConcertoto16Zones ..............................................................................................Page14
IX.UsingtheGrandConcertoConfiguratorSoftware ..................................................................................Page14
1.MainStartup ............................................................................................................................Page14
2.IRLibraries .............................................................................................................................Page15
3.DefiningSources .....................................................................................................................Page18
4.Macros ...................................................................................................................................Page19
5.Zones .....................................................................................................................................Page21
6.SystemSettings ......................................................................................................................Page23
7.UpdateSystem ........................................................................................................................Page25
X.ControlPadSetup ...............................................................................................................................Page26
XI.UsingtheControlPad'sMENUButton...................................................................................................Page26
Favorites ....................................................................................................................................Page26
Sources ......................................................................................................................................Page27
AdvancedZoneControl ................................................................................................................Page27
Setup .........................................................................................................................................Page28
Favorites1-12 ....................................................................................................................Page28
ZoneSettings ....................................................................................................................Page28
SourceSettings ..................................................................................................................Page30
SystemSettings .................................................................................................................Page30
XII.GrandConcertoAccessories
TheNV-I8DLSIRLearningStationInterface ...................................................................................Page32
NV-MI1MuteInterruptAdaptor ....................................................................................................Page34
NV-LSI24LocalSourceInterrupt ...................................................................................................Page35
NV-LSA40LocalSourceAmplifier .................................................................................................Page36
NV-LSA40PDLocalSourcePowerDistributionHub .........................................................................Page37
NV-D2120/D460AuxiliaryAmplifiers ...........................................................................................Page38
GrandConcertoSpecifications ................................................................................................................Page39
Troubleshooting ....................................................................................................................................Page40
InstallingGrandConcertoinYourHome
3
Introduction
CongratulationsonthepurchaseofyourNuVoSystem.TheGrandConcertoSystemrepresentsNuVo’sbest.TheGrandConcerto's
state-of-the-artcontrolandNuVoNetcommunicationwiththeGrandConcertoSuiteofaudiocomponentsofferthehighestvalue
whole-homeaudiosystemavailable.
ThisinstallationmanualoutlinestheinstallationandsetupofyournewGrandConcertoSystem.Werecommendthatyoureadthis
manualpriortoinstallingyoursystem.Properinstallationandsetupwillinsureyearsofaudioenjoyment.
072 8
303 3118
I
N
T
E
R
T
E
K
CM
ModelNV-T 2S IR
Dua lSIRIU SReady A M/F MTune r
www .nu vo tec hnolo gi es.co m
NuVoTechnol og ie sLLC Heb ro n,K Y USA•
CON FORMSTOU L
STD .6006 5CERTI FIED
TOCAN /CSA ST D.
C22 .2No.6 0065: 06
RS232
SYST EM
ANTE NNA
IN
NuVoNet
USENV-T 2D AA WITH
OPTIO NA L NV-T 2FXC
ANDSIR IU S ANTENN A
IRINPUT
L
AUDI O
R
TUNE R A
SIRIUS
L
AUDI O
R
TUNE RB
RoHS
SIRIUS
R
OUTPUTPOWER
OUTPUTPOWER
20W/6OHMX2
20W/6OHMX2
SYSON
EXT.MUTE
L
R
L
R
L
R
VARI AB LE
OUT PUT
FIX ED
OUT PUT
SUM1
3033 118
C
US
CON FORMS TO
UL STD .6500
CER TIFIE DT O
CAN /CSA STD .E600 65
NuVo Tech nolog iesCin cinna tiOhioU SA
FUS E:T5 A
120 V60Hz50 0W
MODE L NV-I8DM
SIXSO URCEEI GHTZON E
AUDI ODISTR IBUTI ONSYST EM
www. nuvot echno logie s.com
OUTPUTPOWER
OUTPUTPOWER
OUTPUTPOWER
20W/6OHMX2
20W/6OHMX2
20W/6OHMX2
TIP =L
RIN G=R
VARI AB LE
OUT PUT
FIX ED
OUT PUT
TIP =L
RIN G=R
VARI AB LE
OUT PUT
FIX ED
OUT PUT
TIP =L
RIN G=R
VARI AB LE
OUT PUT
FIX ED
OUT PUT
TIP =L
RIN G=R
VARI AB LE
OUT PUT
FIX ED
OUT PUT
TIP =L
RIN G=R
VARI AB LE
OUT PUT
VARI AB LE
OUT PUT
FIX ED
OUT PUT
FIX ED
OUT PUT
TIP =L
RIN G=R
TIP =L
RIN G=R
1 2 3 4 5
6
1 2 3 4 5
6
2 3
4
1 2 3
RS-232
CON NECTTO
NV-I 8X
USEN V-SLC1
CAB LE
CON NECTTO
NV-I 8X
USEN V-SLC1
CAB LE
CON NECTTO
NV-I 8EZP1
USEN V-NC1
CAB LE
USECNLY WITH250VFUSE
4
5
6
SUM2
5 6 7
8
OUTPUTPOWER
20W/6OHMX2
ZONE6
ZONE6
ZONE7&8
SYSTEM
ZONETRI GG ERO UTPUTS
SOUR CEL IN K
SOUR CEI NP UT S
ZONE1
NETWOR KEMITTE ROU TP UTS DIGITAL LI NK
ZONE3
ZONE4
ZONE5
ZONE2
PROGRA M
6
4
5
3
1
2
SOURCESTATUSI NP UT S
1
MENU
OK
ModernRock
Drift-FollowTh
LivingFor
AM/FM
3:09pm
MODEL NV-MPS4
USB
USB
RS232
RS232
ETHERNET
Passthrough
ToNuVo
NuVoNet
A
B
C D
L
L
R
R
AUDIO
SYSTEM
MusicPortServer
NV-RIPD
EZPortHub
-
+
AUDIO
NuVoNet
POWER
12VDC
NV-RIPR-DCFront
NV-D460AudioAmplifier
NV-MPS4MusicPort
NV-T2SIRDualTuner
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C C C C
MENU
OK
ModernRock
Drift-FollowTh
LivingFor
AM/FM
3:09pm
MENU
OK
ModernRock
Drift-FollowTh
LivingFor
AM/FM
3:09pm
GrandConcertoSuiteWiringDiagram
4
R
OUTPUTPOWER
OUTPUTPOWER
20W/6OHMX2
20W/6OHMX2
SYSON
EXT.MUTE
L
R
L
R
L
R
VARI AB LE
OUTPU T
FIXED
OUTPU T
SUM1
303 3118
C
US
CON FORMS T O
UL ST D.6 500
CER TIF IED TO
CAN /CSA STD .E600 65
NuVo Tec hnolo giesCi ncinn atiOhi oUSA
FUS E:T5 A
120 V60Hz50 0W
MODE L NV-I8D M
SIXSO URCEEI GHTZON E
AUDI ODISTR IBUTI ONSYST EM
www. nuvot echno logie s.com
OUTPUTPOWER
OUTPUTPOWER
OUTPUTPOWER
20W/6OHMX2
20W/6OHMX2
20W/6OHMX2
TIP=L
RING= R
VARI AB LE
OUTPU T
FIXED
OUTPU T
TIP=L
RING= R
VARI AB LE
OUTPU T
FIXED
OUTPU T
TIP=L
RING= R
VARI AB LE
OUTPU T
FIXED
OUTPU T
TIP=L
RING= R
VARI AB LE
OUTPU T
FIXED
OUTPU T
TIP=L
RING= R
VARI AB LE
OUTPU T
VARI AB LE
OUTPU T
FIXED
OUTPU T
FIXED
OUTPU T
TIP=L
RING= R
TIP=L
RING= R
1 2 3 4 5
6
1 2 3 4 5
6
2 3
4
1 2 3
RS-2 32
CONNE CTT O
NV-I8X
USENV-S LC 1
CABLE
CONNE CTT O
NV-I8X
USENV-S LC 1
CABLE
CONNE CTT O
NV-I8E ZP 1
USENV-N C1
CABLE
USECNLY WITH250VFUSE
4
5
6
SUM2
5 6 7
8
OUTPUTPOWER
20W/6OHMX2
ZONE6ZONE6
ZONE7 &8
SYST EM
ZONET RIGGEROUTPUTS
SOURCELI NK
SOUR CEINPUTS
ZONE1
NuVoNetEMIT TEROUTPUTS DIGI TAL LINK
ZONE3
ZONE4
ZONE5
ZONE2
PROG RAM
6
4
5
3
1
2
SOUR CES TATUSIN PUTS
1
2
3
4
5
6
7
8
9
10
11
12
14
13
1
GrandConcertoBackPanel
1. Thesepreamplineoutsareusedforsendinganaudiosignaltoanexternalpoweramplifier.Thisisusefulfor
largeareasthatrequireadditionalpairsofspeakers.Usethevariableoutputwhenyouwanttheadditionalamplifiertobe
controlledbythezone'sControlPad.
2. Thesepreamplineoutsareusedforsendinganaudiosignaltoanexternalpoweramplifierwhenadditional
speakersareneeded.Thisoutputisconstant,soanamplifierconnectedtoitwillnotchangevolumewiththatzone'sControl
Pad.
3. TheGrandConcertowillacceptuptosixaudiosources.TheseareconnectedtotheGrandConcertoamplifier
withstandardstereoRCAcables.
4. SixoftheGrandConcerto'seightzonesareamplified.Theseoutputsaccept16-gage,two-conductorspeaker
wireandprovide40wattsperchannelofpower.
5. ThisconnectionisusedinconjunctionwiththeGrandConcertoExpanderSystemtocreate16totalzones.The
sourcelinkcableissuppliedwiththeExpanderSystem.
6. TheseinputsarecurrentlyinactiveontheGrandConcerto.Theyareintendedforfutureuse.
7. These12-voltoutputscanbeusedtotriggeranexternaldevice,suchasanauxiliarypoweramplifier,for
useinaspecificzone.
8. IRsignalsreceivedfromthekeypadsarepassedthroughtheIRoutputstothesourceequipmentusingthe
suppliedIRemitters.Outputs1-6areroutedtothecorrespondingsources,andtheSUMoutputs1and2arecommonandwill
passallIRsignals.
9. Thisisaconstant12-voltoutputforturningonexternalequipment.Thereisnovoltageoutputwhenthezonesare
off.
10. Thisinputisdesignedtotemporarilymuteanyaudioplayingthroughthesystemwhenthedoorbellorphone
rings.ThisworksinconjunctionwiththeNuVoNV-MI1muteinterfaceaccessory.Italsoactsasatriggerforwhole-house
pagingthroughaphonesystemwhensetforthisfunctionintheConfiguratorSoftware.
11. ThisRJ45connectionistheinputforallzoneinformationcomingfromtheGrandConcertoControlPads.The
connectionismadeusingtheNetworkCablesuppliedwiththepackage.
12. ThisconnectionisusedinconjunctionwiththeGrandConcertoExpanderSystemtocreate16totalzones.The
DigitalLinkcableissuppliedwiththeExpanderSystem.
13. ThebidirectionalRS232isaserialcommunicationportthatallowstheGrandConcertoSystemtobecontrolledbyan
externalhomeautomationdevice.Itisalsousedforconfigurationandprogrammingpurposes.
14. AdetachablepowercordconnectsthesystemtoanexternalACpowersupply.
VariableOutput:
FixedOutput:
SourceInputs:
SpeakerOutput:
SourceLink:
SourceStatusInputs:
ZoneTriggerOutputs:
IREmitterOutputs:
SYS.ON:
EXT.MUTE:
NetworkInput:
DigitalLink:
RS232:
AC:
5
NV-I8GCP2.7” OLEDControlPad
1. Thisindicatesthecurrentaudiosourceplayinginthatzone.Sourcenamescanbecustomizedinthe
ConfiguratorSoftwarewitha3characterdesignation.
2. EachControlPadcomeswithwhite,ivory,almond,andblacktrimplatesthatattachmagneticallytotheface
oftheControlPad.AdditionalstylesoftrimplatesareavailablefromNuVo.
3. Theorganiclightemittingdiodedisplayisahighlyfunctionaleightlinedisplay.
4. Thisportionofthedisplayservestwofunctions.Innormaloperation,itindicatestheartist,
station,metadata,andothersourceinformation.InMenumodeitusesasmallerfonttodisplaymultiplelinesoflinesof
informationforbrowsingpurposes.
5. ThisbargraphindicatesboththeaudiovolumelevelwhentheControlPadisinnormalplaymode
andtheplaybackstatusofdigitalmusicfilesfromtheMusicPortorNuVoDockforiPod.
6. Menuservesasaccesstomusicbrowsing,presets,andfavorites,aswellasspecificzonesettingparameters.
8.
.
9. TheOKbuttonalsoservesadualfunction.Innormalplaymode,itscrollsthroughtheavailableaudiosources.In
menumode,itisusedtoselectthehighlightedmenuitem.
10. Thesearrowshaveadualfunction.Innormalplaymode,theycontrolvolumelevelupanddown.In
menumode,theyscrollupanddownthroughmenuselections.
11. TheControlPadhasabuilt-inIRreceiverforcompletewirelesscontrolofalltheaudiosourceequipment.
12. ThisisanIRprogrammablebuttonforsimplesourcetransport.Typicallyitwouldtrackforwardorback
ortuneupanddown.Athird “pressandhold” functioncanalsobeassignedtothisbutton.
13. AfeatureoftheGrandConcertoSystemistheabilitytodisplaythecurrenttimeoneachoftheControlPads.
Sourceindicator:
Coverplate:
OLEDDisplay:
NowPlaying/MenuDisplay:
VolumeLevelIndicator:
Menu:
Play/Pause:
OK:
ArrowUpandDown:
IRReceiver:
Forward/Reverse:
Time:
7. Thisbuttonturnsthelocalzoneonandoffandturnsallzonesoffsimultaneously.
ThisIRprogrammablebuttontogglesbetweentheplayandpausefunctionsofthechosensource.When
usingtheT2Tuners,thisbuttontogglesthroughtheTunersreceivemodes.Athird “pressandhold” functioncanalsobe
assignedtothisbutton
Power:
MENU
OK
drift
SVR
1of9
FollowtheDay
3:09PM
3:48
1:28
EdgeofTomorr
1
2
3
4
5
6
7
8
9
10
11
12
13
6
NV-E6GCP1” OLEDControlPad
1. Thisindicatesthecurrentaudiosourceplayinginthatzone.Sourcenamescanbecustomizedinthe
ConfiguratorSoftwarewithathree-characterdesignation.
2. EachControlPadcomeswithwhite,ivory,almond,andblacktrimplatesthatofferascrewlessandelegant
finishedinstallation.
3. Theorganiclightemittingdiodedisplayisahighlyfunctionalandvividmulti-linedisplay.
4. Thisportionofthedisplayservestwofunctions:Innormaloperation,itindicatestheartist,
station,metadata,andothersourceinformation,andinMenumode,itdisplaysmultiplelinesofinformationforbrowsing
purposes.
5. ThisbargraphindicatestheaudiovolumelevelwhentheControlPadisinnormalplaymode.
WheninMenuMode,itindicatestheplaybackstatusofdigitalmusicfilesfromtheMusicPortorNuVoDockforiPod.
6. Thisbuttonturnsthelocalzoneonandoffandhastheabilitytoturnallzonesoffsimultaneously.
7. Menuservesasaccesstomusicbrowsing,presets,andfavorites,aswellasspecificzoneandsystemsetting
parameters.
8. ThisIRprogrammablebuttontogglesbetweentheplayandpausefunctionsofthechosensource.Whenusing
theT2Tuners,thisbuttontogglesthroughtheTuner'sreceivemodes.Athird “pressandhold” functioncanalsobeassigned
tothisbuttonforadditionalfunctionality.
9. TheOKbuttonservesadualfunction.Innormalplaymode,itscrollsthroughtheavailableaudiosources.InMenumode,it
isusedtoselectthehighlightedmenuitem.
10. ThisisanIRprogrammablebuttonforsimplesourcetransportfunctions.Typically,itwouldtrackforward
andbackortuneupanddown.Athird “pressandhold” functioncanalsobeassignedtothisbuttonforadditional
functionality.
11. Thesearrowshaveadualfunction.Innormalplaymode,theycontrolthevolumelevelupanddown.In
Menumode,theyscrollupanddownthroughmenuselections.
12. TheControlPadhasabuilt-inIRreceiverforcompletewirelesscontrolofallaudiosourceequipment.
SourceIndicator:
WallPlate:
OLEDDisplay:
NowPlaying/MenuDisplay:
VolumeLevelIndicator:
Power:
Menu:
Play/Pause:
OK:
Forward/Reverse:
ArrowUpandDown:
IRReceiver:
M3A
1:19
3:48
2OF2-Followth...
drift-EdgeofTom
1
2
3
4
5
6
7
8
9
10
11
12
7
1
2
3
4
5
6
7
8
9
10
11
12
15
14
13
1. Thisdisplayscrucialinformationabouttheselectedsource,suchasartist,album,track,title,frequencyor
station,andmetadataforAM/FMandSatelliteradio.AlbumartisalsodisplayedwhenusedwiththeMusicPortsource.When
inmenumode,themenucontrolchoicesaredisplayed.
2. AtimedisplayisdistributedtoallthezonesintheSystembyNuVoNet.Thisissetwhenaconfigurationis
downloadedtotheSystemoritcanbesetintheSystemMenu.
3. Thisindicatorwilllightwhenthesystemisinpartymode(allzonesturnedonandoperatedfromoneControl
Pad).
4. Whenthisiconislit,ExclusiveSourceisturnedon.ExclusiveSourcelocksoutsourcecontrolfromother
zonesofthechosensource.
5. Thisiconwilllightwhenthezoneistemporarilymuted.
6. Thisiconindicatesthatthezoneisin “Sleep” mode,whichistheabilitytosetanaudiosourcetoplayforaspecified
amountoftime.
7. Thisindicatesthatthezoneislocked.Inthisstate,afour-digitsecuritycodeisrequiredtounlockthezone'scontrol
features.
8. Thisiconindicatesthatthezoneissetfor “DoNotDisturb”.TherearethreeDoNotDisturbchoices;exclude
thezonefromPartyMode,PageMode,and/orSystemMute.
9. Thisiconwilllightwhenthesystemistriggeredtogointo “PageMode”.
10.
11. Thesefunctionbuttonsrepresentbasicsourcecontrol.Theychangeinfunctionalitywiththechosen
audiosource.
12.
15. Thisbuttonturnspowertothezoneonandoff.Whenpushedandhelditwillturnoffallofthezonesinthe
system.
SourceDisplay:
CurrentTime:
PartyMode:
ExclusiveSource:
Mute:
Sleep:
Lock:
DoNotDisturb:
Page:
MenuButton:
TransportFunctions:
PowerButton:
Menuservesasaccesstomusicbrowsing,presets,andfavorites,aswellasallowingaccesstospecificzone
andsystemcontroloperations.
Thisbargraphindicatestheplaybackstatusofdigitalmusicfilesfrommusic
playbacksourcedevicessuchastheMusicPortorNuVoDocksforiPod.Thesamebargraphdisplaytemporarilysupports
volumeleveldisplaywheneveravolumeadjustmentisbeingmade.
13. Thesebuttonsincreaseordecreasethezone'svolume.
14. ThisbuttonreturnstheusertotheHomescreen(theviewshownhere).
PlaybackStatus/VolumeLevelIndicator:
VolumeUpandDownButtons:
HomeButton:
NV-CTP36ColorTouchPad
8
1. AthreecharacterabbreviationoftheselectedsourceappearsinthisportionoftheWirelessControlPad
display.
2. Thedisplayismulti-lineOLED(OrganicLightEmittingDiode).Itshowsalbum,artistandtrackforpersonalmusic,
andchannelandfrequencyinformationforbroadcastmusic.Inmenumode,thedisplaygoestoeightlinesoftext.
3. Thisbargraphindicatestheplaybackstatusofdigitalmusicfilesfrommusicplayback
sourcedevicessuchastheMusicPort,orNuVoDocksforiPod.Thesamebargraphdisplaytemporarilysupportsvolumelevel
displaywheneveravolumeadjustmentisbeingmade.
4. Menuservesasaccesstomusicbrowsing,presets,andfavorites,aswellasallowingaccesstospecificzoneandsystem
controloperations.
5. TheseareusedtoscrollupanddownthroughthemenusandcontrolvolumeUpandDowninnormalplay
mode.
6. Thisbuttonturnsthelocalzoneonandoff,orturnsallzonesoffsimultaneously.
7. Thisindicatesthecurrentbatterychargelevel.
8. Whenthisbuttonispushed,alistofavailablelisteningzonesislistedonthedisplay.Theusercanchangezone
controlbymovingthehighlighttothedesiredzoneandpressingtheOKbutton.
9. TheOKbuttonservesadualfunction.Innormalplaymode,itsequencesthroughtheavailableaudiosources.InMenu
mode,itisusedtoselectthehighlightedmenuitem.
10. InNuVoNetcommunication,thesebuttonswilltrackforwardandbackortuneupanddown.Forthird-
partysources,theseareIRprogrammablebuttonsforsimplesourcetransportfunctions.Anadditional “pressandhold”
commandcanalsobeassignedtothisbuttonforadditionalfunctionality(IRcommandscanonlybeassignedtobuttonsinthe
EssentiaConfiguratorsoftware).
11. ThisIRprogrammablebuttontogglesbetweentheplayandpausefunctionsofthechosensource.Whencontrolling
theT2Tuners,thisbuttontogglesthroughtheTuner'sreceivemodes.Athird “pressandhold” functioncanalsobeassignedto
thisbuttonforadditionalfunctionality.
SelectedSource:
OLEDDisplay:
PlaybackStatus/VolumeLevelIndicator:
Menu:
UpandDownArrows:
Power:
BatteryDisplay:
ZoneButton:
OK:
ForwardandBackArrows:
Play/Pause:
1
2
3
4
5
6
7
8
9
10
11
OK
MENU ZONE
drift
M3A
1of9
FollowtheDay
3:48
1:28
EdgeofTomorr
NV-WCPSWirelessControlPad
HOLD
ALL OFF
NV-GRC1
REMOTECONTROL
FAVORITES
VOLUME
1
2
3
4
5
6
7
8
9
11
10
12
SOURCE/OK
PWR
MUTE
SLEEP
DISP
MENU
G2
G1
F1 F2
F3 F4
1
2
3
4
5
6
7
8
9
10
11
12
13
NV-GRC1RemoteControl
9
1. Eachzonecanbeturnedonandoff,orall
zonescanbeturnedoffwiththisbutton.
2. Thisservestwofunctions.Innormal
operationmode,itisavolumecontrol,butwhen
youareusingthemenufeaturesoftheControlPad,
itallowsscrollingupanddown.
3. Thesebuttonsarecurrently
inactiveanddesignedforfutureuse.
4. TheseIRprogrammable
buttonsaredesignedforforwardandreverse
functions.
5. AfunctionoftheGrandConcertoSystem
istheabilitytoaccessuserdefinedfavoritesfor
easyaccess.Thefirsttwelvearedirectlyaccessible
usingtheRC1Favoritesbuttons.
6. ThisbuttonallowsaccesstotheDisplaydim
menuavailableateachControlPad.
7. ThisLED(LightEmittingDiode)lights
toindicateabuttonpush.
8. TheRC1remoteprovidesadiscretemute
functiontoquicklysilencethezone'soutput.
9. Thisisanotherdualfunctionbutton.In
normalplaybackmodeitscrollsthroughthe
sources,orinmenumodeitselectsahighlighted
menuchoice.
10. ThisIRprogrammablebuttontoggles
betweentheplayandpausefunctionsofthechosen
source.WhenusingtheT2GTuners,thisbutton
togglesthroughtheTuner’sreceivemodes.
11. Thisbuttonentersthemenufeaturesofthe
ControlPad.WheninMenumodetheVolumeup
anddownbuttonsscrollthroughthemenuchoices.
12. Thisallowsaccesstothesleeptimermode.
13. Thesebuttonsarecurrentlyinactive.
Power:
Volume:
FunctionButtons:
ForwardandReverse:
Favorites:
DISP:
FunctionLED:
MUTE:
SOURCE/OK:
Play/Pause:
MENU:
Sleep:
G1andG2:
InstallingtheGrandConcertoSysteminYourHome
I. CAT5Termination
TheGrandConcertoSystemusesCAT5cableforControlPadcontrolandeithertwoorfour-conductor16-gaugespeakerwire.All
thewireis “homerun” fromeachzonetothelocationoftheGrandConcertoamplifierandAudioSourceequipment.
CompleteCAT5CrimpingInstructions
TheNuVoaudiosystemsrequireCAT5,unshielded,twisted
pair(UTP)forcommunicationbetweentheControlPadsand
themainamplifierunit.Eachendofthewireisterminated
withanRJ45connector.
TheGrandConcertoSystemcanaccommodate2,000total
feetofCAT5cable.Forthemostreliableoperation,itisbest
thatnosinglerunofCAT5exceeds250feet.
ThecorrectwiringschemefortheCAT5cableisstandard
EIA/TIA568A.ProperlyterminatingtheCAT5cableiscrucial
fortheoperationofthesystem.Itisveryimportanttousea
goodqualitycrimptool,andtesteachendtoendrunwitha
CAT5wiretestertoinsurethatyoursystemoperates
flawlessly,Fig.1.
1.Stripa2to3inchportionoftheinsulation,exposingthe
4twistedpairs.
2.Untwistthewiresandfanthemoutindividually.Arrange
thewiresintothecorrectcolorschemeasshowninFig.1.
3.Flattenthewiresintheircorrectorderandtrimthem
evenlyacrossthetop.Mostcrimptoolshaveawire
trimmerbuilt-in.Itisbesttotrimthewirestoabout½”
inlength.
4.Whileholdingthewiresflatbetweenyourthumband
forefinger,insertthewiresintotheRj45connectorso
eachisinitsownslot.PushthewireintotheRJ45soall8
conductorstouchtheendoftheconnector.Theinsulation
jacketshouldextendbeyondthecrimppointoftheRJ45.
5.InserttheRJ45intothecrimptoolreceptacleandsqueeze
thetoolfirmly.Notethataratchettypetoolshould
tightendownuntilitnolongerclicks.
6.TheRJ45shouldbefirmlycrimpedtotheCAT5insulation.
Itisnecessarythatthecolorschemeberepeated
identicallyoneachendofthewire.
7.TesteachterminationwithaCAT5Testerbefore
completingtheinstallation.
Step-by-StepCrimpingInstructions:
Fig.1:EIA568AwiringschemeforCAT5Cable
Pin#
1.GreenStripe
2.Green
3.OrangeStripe
4.Blue
5.BlueStripe
6.Orange
7.BrownStripe
8.Brown
Note:Colorslistedas “stripe” areawhitewire
withacoloredstripe.
Step1 Step2 Step3
Step4
Step5 Step6
1 2 3 4 5 6 7 8
Topviewwith
tabdown.
Wiresinsertfrom
thisend.
Pair2
Pair3
Pair4
Pair1
IR Active
Gro
u
nd
ControlDa
t
a Bus-
Con
tro
lDa
t
a
Bus+
IR Data
Ground
+24V P
o
wer
Ground
10
-
-
+
+
LEFT
RIGHT
LEFT
RIGHT
11
II.TerminatingtheSpeakerWire(Fig.2)
AlltheNuVosystemsoperateacrossa “homerun” wiring
schemeusingCAT5forthezoneControlPadcontrol
communication,andaseparaterunofspeakerwireforeach
zonefromthespeakeroutputstothezonespeakers.We
suggest16AWG2or4-conductorspeakerwires.
Thespeakerwireterminationisdoneusingamodular “Euro”
connector.Eachconductorisscreweddowntotheconnector
blockandpluggedintotheappropriatespeakeroutputon
thebackoftheamplifier.TheproperterminationisLeft
channel: and ;Rightchannel: and .– + – +
Fig.2
III.InstallingtheGrandConcertoAmplifier
Systemsetupworksbestwhentheamplifierisplacedinthe
samelocationastheaudiosourceequipment.Thisis
typicallyinanaudiorack,entertainmentcenter,oracloset
dedicatedtohousingthehomeaudio/videoequipment.
Theamplifiershouldbepluggedinandthepowerbuttonon
thefrontpanelshouldbeengagedbeforeproceedingwith
therestoftheinstallation.Thisactivatestheinternal
protectivecircuitryoftheGrandConcertoSystem.
IV.InstallingtheNV-I8GEZPEZPort(Fig.3)
TheEZPortisamulti-connectionhubdesignedtoacceptall
theCAT5wiresfromthecontrollersinthesystem.The
locationoftheEZPortshouldbedeterminedbythelocation
oftheGrandConcertoamplifier.Itisbesttoplaceinawall
behindtheamplifierthatwouldbeeasilyaccessibleif
necessary.
TheEZPortfitseasilyinmostdual-gangsize,low-voltage
ringwithanopenback.Theseareoftenreferredtoas “mud
rings”.SimplyplugtheterminatedCAT5wiresintoanyof
the20availablejacksonthebackoftheEZPort.Theorderin
whichtheindividualCAT5wiresarepluggedinisnot
important,althoughitisstronglyrecommendedthatyou
labeltheCAT5withtheappropriatezonenumberforfuture
reference.Anaccessory,NV-RM3Uisusefulformounting
theEZPortinarack.
OnceyouhavepluggedtheCAT5wiresintotheEZPort,screw
theEZportintoitsconstructionbracketusingthesupplied
mountingscrews.
Fig.3
Dev ice1
Con nectto
NV-I 8GM
Con certoE ZPort
Mod elNV-I8 GEZP
www.n uvote chnol ogies .com
NuVoTech nolog iesLLCH ebron ,Kentu ckyUSA
Dev ice2 De vice3
Dev ice4 Dev ice5 Dev ice6
R
SYSON
EXT.MUTE
SUM1
3033 118
C
US
CONF ORMS TO
UL STD .6500
CERT IFIED TO
CAN/ CSA STD. E6006 5
NuVo Tech nolog iesCin cinna tiOhioU SA
FUSE :T5 A
120V6 0Hz500 W
MODEL NV-I8D M
SIXSOU RCEEIG HTZONE
AUDIOD ISTRI BUTIO NSYSTE M
www.n uvote chnol ogies .com
VARI ABLE
OUT PUT
FIX ED
OUT PUT
TIP =L
RIN G=R
RS- 232
CON NECTTO
NV-I 8X
USEN V-SLC1
CAB LE
CON NECTTO
NV-I 8EZP1
USEN V-NC1
CAB LE
USECNLYWITH250VFUSE
SUM2
OUTPUTPOWER
20W/6OHMX2
ZONE7& 8
SYSTE M
NETWO RK DIGITA L LIN K
PROGR AM
12
V.ConnectingtheEZPorttotheGrandConcertoAmplifier
(Fig.4)
WhentheEZPortisinstalled,theonlypartvisibleshouldbe
thefaceplateandsevenRJ45ports.Thesuppliedpre-
terminatednetworkcableshouldthenbepluggedintothe
portlabeled “ConnecttoNV-I8GM” andintothe “Network”
connectiononthebackoftheGrandConcertoAmplifier.Any
CAT5cableterminatedusing568Aor568Bnetworkwiring
willsufficeshouldyouneedalongerconnection.
Remember,itisimportanttoterminatethecablethesame
wayonbothends.
Fig.4
VI.AttachingAudioSourceEquipment(Fig.5)
EachpieceofaudioequipmentisconnectedtotheGrand
ConcertoamplifierwithstandardstereoRCAcables.Attach
anRCAcabletothecorrespondingaudiooutputonthe
sourceequipmentandtothedesiredsourceinputonthe
backoftheGrandConcertoamplifier.Thenumberedinput
foreachsourceisimportantintheconfigurationofthe
system.ThiswillbecoveredindetailintheGrandConcerto
Configuratorportionofthismanual.
Fig.5
SettinguptheNuVoSourcesforusewithNuVoNet
IX.GrandConcertoConfiguratorSoftware
.
AfeatureoftheGrandConcertoSystemisitsabilityto
automaticallycommunicatewiththeT2Tuners,MusicPort
and,andtheNuVoDocksforiPod.Thecommunication
happensthroughtheEZPortconnectionhub,acrossa
communicationprotocolcalledNuVoNet.Althoughsoftware
programmingisnotnecessaryforthisfunction,configuring
theinstallationthroughtheConfiguratorSoftwarepriorto
installationhasdistinctadvantagesandishighly
recommended,see ,
pg 11.
T2Tuners(Fig.6)
WheneachmodeloftheT2Tunersarepluggedinforthe
firsttime,theinitialdisplay,
willappear.Whenthe buttonistouched,the
Tunerwillpromptaregionaltuningselection.Itwillthengo
to
and StandAloneisautomatically
highlightedatinitialstartup.
UnitializedStateDetected
(PressOK) OK
TunerA,Standalone,Source1,Source2,Source3,Source4,
Source5, Source6.
Usethearrowstoscrolltotheappropriatesourcenumber.
Whentheselectionismade,theT2willgotothesame
selectionforTunerB.Wheneachoutputselectionis
complete,theGrandConcertoSystemNuVoNetwill
recognizethatsource.
PleasenotethattheSourceselectionswillnotbeselectable
untiltheappropriateaudioconnectionsaremadebetweenthe
T2andtheGrandConcertoamplifier.
ANTENNA
IN
USEN V-T2FAA
ANT ENNA
L
AUDIO
R
TUNER A
SIR IUS
L
AUDIO
R
TUNERB
SIR IU S
SOU RCELIN K
L
R
L
R
L
R
SOU RCEINP UTS
TIP =L
RIN G=R
ZON E2
VARIA BLE
OUT PUT
FIX ED
OUT PUT
TIP =L
RIN G=R
VARIA BLE
OUT PUT
FIX ED
OUT PUT
TIP =L
RIN G=R
VARIA BLE
OUT PUT
FIX ED
OUT PUT
TIP =L
RIN G=R
1 2 3 4 5
6
1 2 3 4 5
6
1 2 3
4
CON NECTTO
NV-I 8X
USEN V-SLC1
CAB LE
5
6
ZON E1
VARIA BLE
OUT PUT
FIX ED
OUT PUT
SPE AKER
40W /6OHMSX2
LEF TRIGHT
ZON E3
ZON E4
SOU RCESTATU S
SPE AKER
40W /6OHMSX2
LEF TRIGHT
SPE AKER
40W /6OHMSX2
LEF TRIGHT
SPE AKER
40W /6OHMSX2
LEF TRIGHT
SYST EM
ZONET RIGGEROU TPUTS
EMIT TEROUTPU TS
SYSON
EXT.MUTE
SUM1
1 3
5
7
8
1
3 5
2
4
6
SUM2
2 4
6
6
dISC
COMPACT
13
VII.ConnectingtheIREmittersforThird-PartySource
Components(Fig.6)
IRcommandsforthesourceequipmentaretransferredfrom
theGrandConcertoamplifiertothesourceequipmentusing
theminiIRmouseemitters.Sixofthesearesuppliedwith
theGrandConcertoSystem.Theemitterispluggedintothe
correspondingsourceIRoutputontheGrandConcertoand
thenplacedovertheIRreceiverwindowonthesource
component.TheIRoutputsareindividuallyroutedto
sources1-6.
NuVoT2GTunerDirectNumericAccess(Fig.7)
TheNuVoT2GTunershavetheabilityfordirectIRaccessto
numericstationtuning.ThiscanbedonethroughtheT2G
remotecontrolorusingathirdpartyremotecontrolthathas
beentaughttheT2GIRcodes.Toallowthiscontrol,itis
necessarytolinkoneoftheGrandConcertoSUMIRoutputs
totheDirectIRinputontheT2Gusingastereo3.5mm
(1/8”)monopatchcable.Oncetheconnectionismade,the
T2GwillrespondtothenumericIRcommandsissued
throughtheGrandConcertoControlPadIRreceivers.
Fig.6
Fig.7
NuVoDockforiPod
NotethatalthoughtheNuVoDocksystemhasa16position
rotaryswitchforsourceinput,onlypositions1-6areused.
BoththewiredandwirelessNuVoDocksforiPoduseasimple
rotaryswitchtosettheappropriatesourceinput.Uptotwo
wirelessNuVoDocksand6wiredNuVoDockscanbeusedas
individualsourcesthroughNuVoNet.Thewiredandwireless
NuVoDocksconsistofthedockforiPodplaybackand
rechargingandareceivercomponentdesignedto
communicatewithNuVoNet.Priortopluggingthereceiver
intotheGrandConcertoEZPort,settheSourcerotaryswitch
tothedesiredsourcenumberinput.Onceset,theGrand
ConcertoControlPadswillautomaticallydisplaytheiPod
informationwhenaniPodispluggedintotheNuVoDock.
EachNuVoDockandreceivermusthaveaseparatesource
numberselected.
303 3118
I
N
T
E
R
T
E
K
CM
ModelN V-T 2S IR
Dua lSIRIU SReady A M/F MTune r
www .nu vo tec hno logie s.com
NuVoTechnol og iesL LC He br on ,KY US A•
CONF ORMSTOU L
STD. 60065C ERTIF IED
TOCAN /CSA STD .
C22. 2No.60 065:0 6
RS232
SYST EM
NuVoNe t
IRINPUT
RoHS
SYST EM
ZONET RIGGEROU TPUTS
EMIT TEROUTPU TS
SYSON
EXT.MUTE
SUM1
1 3
5
7
8
1
3 5
2
4
6
SUM2
2 4
6
6
T2TunerIRInput
GrandConcertoIROuput
MusicPortMPS4andMPS4-E
TheMusicPortandMusicPortElitesourcecomponentsuse
theIPconnectiontothehome’snetworkrouterforthe
sourceaddressselection.TheMusicPortRemoteConfig
utilityisaccessedthroughaninternetbrowserbyentering
theMusicPort’sIPaddressfollowedby/config,ie.
192.168.1.189/config.TheRemoteConfigwillopenanda
“SourceAddress” taballowsyoutosetthesourcenumber
foreachofthefourMusicPortaudiooutputs.These
selectionsaresavedtotheMusicPort’sflashmemoryand
whenitsNuVoNetoutputisconnectedtotheEZPort,the
attachedGrandConcertoSystemwillrecognizetheMusic
Portsources.
TheSUM1andSUM2outputswillflashanyIRcommandthat
issentfromanyofthezones.Thisismostcommonlyused
withanIRblasterdesignedtoflashIRcommandstoavariety
ofcomponents.
14
VIII.ExpandingGrandConcertoto16Zones(Fig.8)
EightadditionallisteningzonescanbeaddedtotheGrand
ConcertoSystemusingtheGrandConcertoExpander
package.TheexpansioniseasilydoneusingtheSourceLink
andDigitalLinkmulti-pinoutputsontheGrandConcerto
mainamplifier(NV-I8DMS).
ThenecessarycablesforthisaresuppliedwiththeExpander
package.NootherconnectionsarenecessaryexcepttheAC
powercordandtheadditionalspeakerterminations.The
additionalCAT5wiresforzones9-16plugintotheGrand
ConcertoEZPort.
Fig.8
IX.UsingtheGrandConcertoConfiguratorSoftware
1.MainStartup(Fig.9)
ThefollowingsectionincludestheoptionalNV-I8DLSIR
LearningStation.ThisisavailableasapackagefromNuVo
TechnologiesoranyAuthorizedNuVoDistributor.
TheConfiguratorisatabbedWizard-styleinterface
designedtosequentiallywalktheinstallerthroughthe
systemsetup.Whentheprogramislaunched,theStarttab
ishighlighted.Thisgivesthreechoicesforbeginninga
configuration.Youcancreateanewfile,openanexisting
file,orretrieveanexistingfilefromaconfiguredGrand
ConcertoSystem.Onceconfigured,thefinishedprogram
loadedintotheGrandConcertomainamplifiercanalwaysbe
retrievedviatheRS232portandedited.
Onceaconfigurationfilehasbeenopened,youcanthen
clickonthenextbuttontocontinue.TheConfiguratorwill
notletyoucontinuebeyondStartwithouteithercreatinga
newfileoropeninganexistingfile.Itwillalsoprevent
movingforwardthroughanyofthetabsuntilthenecessary
informationiscompletedinanyoneofthetabs.
The
ConfiguratorSoftwareisaPCprogramdownloadedfromthe
NuVowebsiteDealerResourceCenter.AccesstotheDealer
ResourceCenterrequiresaNuVoissuedlogin.
Fig.9
R
OUTPUTPOWER
OUTPUTPOWER
20W/6OHMX2
20W/6OHMX2
SYSON
EXT.MUTE
L
R
L
R
L
R
VARIA BLE
OUTP UT
FIXE D
OUTP UT
SUM1
3033118
C
US
CONFO RMS TO
UL STD. 6500
CERTI FIED TO
CAN/C SA STD.E 60065
NuVo Techno logie sCinci nnatiO hioUSA
FUSE: T5 A
120V60 Hz500W
MODEL NV-I8DM
SIXSOUR CEEIGH TZONE
AUDIODI STRIB UTIONS YSTEM
www.nu votec hnolo gies. com
OUTPUTPOWER
OUTPUTPOWER
OUTPUTPOWER
20W/6OHMX2
20W/6OHMX2
20W/6OHMX2
TIP= L
RING =R
VARIA BLE
OUTP UT
FIXE D
OUTP UT
TIP= L
RING =R
VARIA BLE
OUTP UT
FIXE D
OUTP UT
TIP= L
RING =R
VARIA BLE
OUTP UT
FIXE D
OUTP UT
TIP= L
RING =R
VARIA BLE
OUTP UT
FIXE D
OUTP UT
TIP= L
RING =R
VARIA BLE
OUTP UT
VARIA BLE
OUTP UT
FIXE D
OUTP UT
FIXE D
OUTP UT
TIP= L
RING =R
TIP= L
RING =R
1 2 3 4 5
6
1 2 3 4 5
6
2 3
4
1 2 3
RS- 232
CONN ECTTO
NV-I8 X
USENV- SLC1
CABL E
CONN ECTTO
NV-I8 X
USENV- SLC1
CABL E
CONN ECTTO
NV-I8 EZP1
USENV- NC1
CABL E
USECNLYWITH250VFUSE
4
5
6
SUM2
5 6 7
8
OUTPUTPOWER
20W/6OHMX2
ZON E6
ZON E6
ZON E7&8
SYS TEM
ZON ETRIGG EROUTP UTS
SOU RCELIN K
SOU RCEINP UTS
ZON E1
NET WORKEMI TTEROU TPUTS DI GITAL LIN K
ZON E3
ZON E4
ZON E5
ZON E2
PRO GRAM
6
4
5
3
1
2
SOU RCESTATUSI NPUTS
1
R
OUTPUTPOWER
OUTPUTPOWER
20W/6OHMX2
20W/6OHMX2
VARIA BLE
OUTP UT
FIXE D
OUTP UT
3033118
C
US
CONFO RMS TO
UL STD. 6500
CERTI FIED TO
CAN/C SA STD.E 60065
NuVo Techno logie sCinci nnatiO hioUSA
FUSE: T5 A
120V60 Hz500W
MODEL NV-I8DM
SIXSOUR CEEIGH TZONE
AUDIODI STRIB UTIONS YSTEM
www.nu votec hnolo gies. com
OUTPUTPOWER
OUTPUTPOWER
OUTPUTPOWER
20W/6OHMX2
20W/6OHMX2
20W/6OHMX2
TIP= L
RING =R
VARIA BLE
OUTP UT
FIXE D
OUTP UT
TIP= L
RING =R
VARIA BLE
OUTP UT
FIXE D
OUTP UT
TIP= L
RING =R
VARIA BLE
OUTP UT
FIXE D
OUTP UT
TIP= L
RING =R
VARIA BLE
OUTP UT
FIXE D
OUTP UT
TIP= L
RING =R
VARIA BLE
OUTP UT
VARIA BLE
OUTP UT
FIXE D
OUTP UT
FIXE D
OUTP UT
TIP= L
RING =R
TIP= L
RING =R
2 3
4
CONN ECTTO
NV-I8 X
USENV- SLC1
CABL E
CONN ECTTO
NV-I8 X
USENV- SLC1
CABL E
USECNLYWITH250VFUSE
5 6 7
8
OUTPUTPOWER
20W/6OHMX2
ZON E6
ZON E6
ZON E7&8
ZON ETRIGG EROUTP UTS
SOU RCELIN K
ZON E1
DIG ITAL LINK
ZON E3
ZON E4
ZON E5
ZON E2
PRO GRAM
1
15
1.1OpenorCreateGrandConcertoConfiguratorFile(fig.10)
1.2RetrieveConfigurationfromGrandConcerto
Whenyouclickonthisbutton,theprogramgoestoaConfig.
File.Thereyoucaneitheropenoneoftheexisting
configurationsorspecifythenameofanewfile.
Configurationsaresavedwitha.cfgextension.
ToretrieveaconfigurationfromanexistingGrandConcerto
installation,launchtheConfiguratorSoftware.Makesure
yourcomputerisconnectedtotheRS232portontheback
paneloftheGrandConcertoamplifier.TheStartupscreen
hastwobuttons.Thefirstisusedtoopenanexisting
configurationortocreateanewone.Thesecondasksto
“RetrieveExistingConfigurationFromGrandConcerto.”
Whenyouclickonthe “Retrieve” button,aprogresswindow
willappear.
Ifyouhavethisconfigurationalreadystoredonyour
computer'sharddrive,youwillseeadialogboxaskingif
youwishtooverwritetheexistingfile.Ifthisfileisnot
storedinyourcomputer,thisboxwillnotappear.
Fig.10
Fig.12
2.IRLibraries(Fig.11)
TheIRLibraryisalistofavailablecomponentsandtheirIR
functioncodes.TheConfiguratorSoftwarestorescapturedIR
codesinasingledirectory.Oncecapturedordownloaded,
theConfiguratorSoftwarewillpermanentlystoreitasan.irc
file.
Fig.11
2.1AddingaNewComponenttotheIRLibrary(Fig.12)
NewcomponentIRfilesareeasilyaddedbyclickingonthe
AddNewbutton.ThisbringsupanewwindowtitledAddNew
Component.Inthiswindow,youmustfirstenterthe
manufacturernameandmodel.TheTypedrop-downmenu
containsalargelistofcomponents.Eachisatemplateof
commonfunctionsforthattypeofequipment.Clickingon
thetypethatmatchesthecomponentwilladdthetypename
inthatfield.Ifdesired,youcanaddatypenamethatisnot
inthedrop-downmenu.
ClickingonOKwillautomaticallyaddtheselected
componentandassociatedfunctionstotheIRLibrary.
16
UsingtheIRLearningStationInterface(Fig.13)
TorecordnewIRcodes,youwillneedtheIRLearningStation
Interface.TheIRLearningStationInterfaceisapowerful
toolforsettingupnewIRLibrariesforusewiththe
ConfiguratorSoftware,andispartoftheIRLearningStation
Package.Capturingfunctioncodesandaddingthemtothe
componentIRLibraryisaneasyprocess.
TheInterfaceboxisconnectedtoyourcomputerusingone
oftheRS232connectioncablesprovidedwiththeIR
LearningStationpackage.Notethatinmanycases,personal
notebookcomputersdonothaveaDb9serialcable.Inthis
caseanRS232toUSBdonglecablewillbenecessary.
ThebackpaneloftheInterfaceboxhastwoIRoutputsfor
testingpurposes.YoucanusetheincludedIRemitterand
attachittotheIRwindowonthefaceofthesource
componentortothebuilt-inIRblaster,which,whenaimed
atthesourceequipment,willfiretheIRcommand.
Fig.13
POWER
12VDC/0.4A
CONNECTTO
PC
CONNECTTO
CONCERTOD
IR
EMITTER
IR
BLASTER
ConcertoLearningStation
ModelNV-I8DLS
PASSTHRU
READY
IRSENSOR
TEST ACTIVE
POWER
2.2RecordingIRcodes(Fig.14)
WhenanewcomponentisaddedtotheIRLibrary,itis
necessarytorecordtheIRcodesassociatedwitheach
function.Todothis,connecttheLearningStationInterface
asdescribedabove.Double-clickonthedesiredcomponent
fromtheIRLibrarypage.ThiswillopentheIRLibraryEditor.
Thiswindowliststhecompletesetoffunctionsforthattype
ofdevice.
ToinitiatetheIRrecordingprocess,youcaneitherdouble-
clickonafunctiontoberecordedorhighlightthefunction
andclickontheRecordbutton.ThiswillopentheIRLibrary
Recordwindow.Thewindowwillindicatethatthe
Configuratoris “WaitingforIRCommunications.” Torecorda
newcode,simplypointthecomponent'sremotecontrolat
theIRreceiverontheNuVoIRLearningStationInterface.
Thefirsttimeyouenteracode,theConfiguratordetermines
ifitisa “togglingfunction,” whichmeansthattheremote
sendstwocommandsback-to-back.Thisrequiresthatthe
functionbuttonbepressedfourtimesinsuccession.
Whentheremotecodeisentered,theIRLibraryRecord
windowwillgofromyellowtogreenandindicatethatthe
capturewassuccessful,anditwillthenreturntoyellow.
Repeatthisprocedurethreemoretimesuntilthedesired
codeisaddedtotheIRLibraryEditwindow.Youwillnowsee
thenumberofcoderepeatsandthedurationofthecode.A
normalnon-togglingremotewillrequiretwobuttonpushes
tosuccessfullyrecordacommand,whileatogglingremote
willrequirefourbuttonpushesforeachcommand.
Ifthereisanerrorinrecordingthecode,thedisplayinthe
Recordwindowwillindicatethattherewasacommunication
error.Ifthisoccurs,clickontheRecordbuttonandreenter
thecode.
Fig.14
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
/