SportsArt G872 Owner's manual

2011.12

G872

ELLIPTICAL

SPORTSART G872

1. INTRODUCTION..................................................................................................

2. IMPORTANT SAFETY PRECAUTIONS...............................................................

3. LIST OF PARTS...................................................................................................

4. ASSEMBLING THE PRODUCT

STEP 1 Assemble the Pedestal.........................................................................

STEP 2 Assemble Moving Parts........................................................................

STEP 3 Install the Support Tubes......................................................................

STEP 4 Install the Stationary Handlebar............................................................

STEP 5 Install Stoppers and Covers..................................................................

STEP 6 Install the Footplate...............................................................................

STEP 7 Move the Product into Place.................................................................

STEP 8 Level the Product..................................................................................

STEP 9 Install the Boost Converter Box.............................................................

STEP 10 Link Boost Converter Boxes..................................................................

STEP 11 Connect Inverter.....................................................................................

STEP 12 Green System Connections...................................................................

STEP 13 System Inspection.................................................................................

STEP 14 Beware of Moving Parts........................................................................

STEP 15 Integrated TV Installation......................................................................

STEP 16 How to Set the Number of Fitness Products per Pod...........................

5. UNDERSTANDING THE G872 DISPLAY CONSOLE

DISPLAY Specifications........................................................................................

DISPLAY Overview................................................................................................

DISPLAY Windows................................................................................................

DISPLAY Keys......................................................................................................

DISPLAY Screens.................................................................................................

6. OPERATING WORKOUT SETTINGS

OPERATION Quick Start......................................................................................

OPERATION Workout Program Setup..................................................................

OPERATION Workout Program Operation...........................................................

OPERATION Switching Workouts.........................................................................

OPERATION Cool Down.......................................................................................

OPERATION Other Notes.....................................................................................

OPERATION User Preferences and Part Versions...............................................

7. ABOUT HEART RATE DETECTION AND PRESENTATION

HEART RATE Telemetry.......................................................................................

HEART RATE Contact..........................................................................................

8. GUIDELINES FOR EXERCISE

HOW HARD SHOULD I EXERCISE?...................................................................

HOW LONG SHOULD I EXERCISE?...................................................................

HOW OFTEN SHOULD I EXERCISE?.................................................................

ELLIPTICAL TRAINER

OPERATION Cumulative energy generating display (WH)...................................

1

2

7

9

10

11

12

13

14

15

16

17

19

20

22

23

24

25

26

28

29

30

32

TABLE OF CONTENTS

34

40

51

52

53

55

57

9. MAINTENANCE

MAINTENANCE Stride Worm Gear Lubrication....................................................

MAINTENANCE Messages...................................................................................

MAINTENANCE Cleaning......................................................................................

MAINTENANCE Disconnecting the Boost Converter Box.....................................

MAINTENANCE Schedule.....................................................................................

MAINTENANCE Task List (Elliptical Trainers).......................................................

MAINTENANCE One-Year Maintenance Log........................................................

10. BLOCK DIAGRAM...............................................................................................

11. GREEN SYSTEM SETUP INSPECTION CHECKLIST........................................

12. GREEN SYSTEM CABLE CONNECTION ILLUSTRATION................................

58

60

61

62

63

64

65

66

67

71

Congratulations on your purchase of one of the finest exercise products on the

market today, the SportsArt G872 elliptical trainer. Constructed of high quality

materials and designed for years of reliable usage, this product was made to become

an integral part of your commercial fitness venue.

Before this product is assembled or operated, we recommend that you familiarize

yourself with this manual. Understanding the correct assembly and operation of this

product will help ensure that exercisers obtain their fitness goals safely and

successfully.

1

1. INTRODUCTION

2

2. IMPORTANT SAFETY PRECAUTIONS

Do not operate this elliptical trainer if it has been damaged in any way. If it is not

3

4

5

6

No. Name Qty

No.

QtyDescription

A1

A2

A3

A4

A5

A6

A7

2

1

Assembly Parts

A8

A9

A10

A11

A12

7

1

2

3. LIST OF PARTS

Main frame and body

Stationary handlebar

Pedestal covers, left and right

Joint cover, left

Joint cover, right

Right roller cover

Left roller cover

Support tube, left

Support tube, right

Footplate

Hardware kit

Boost converter box

A13

1

Boost converter box

connection wire

8

No. Name Qty

10

11

13

Parts in the Hardware Kit

6

2

4

1

Specification

Notes

No. Name

21

Parts on the Product

Specification

Notes

12

M10*P1.5*L25

M10

D16*d1.0*t1.0

M10*P1.5

30-30

M4*L12

M4

M5

M6

(8*17)

green

Flat and Phillips

ψ

22

23

24

25

26

27

28

29

30

M4*P0.7*L8

5/16"*L2-1/4"

D20*d8*t2.0

M6*L15

D20*d7*t2.0

M8*L15

M8

M6*L15

D20*d7*t2.0

M5*P0.8*L15

M5*0.8*L12

M5*L16

M6*P1.0*L10

Mushroom top inner hex screw

Spring washer

Washer

Stride adjustment linkage

Hex nut

Stopper

Phillips screw

L shaped Allen wrench

T shaped Allen wrench

Double open end wrench

Screwdriver handle

Screwdriver bit

-

Double open end wrench-

Phillips screw

Inner hex screw

Flat washer

Inner hex screw

Handlebar washer

Mushroom top inner hex screw

Spring washer

Inner hex screw

Handlebar washer

Phillips screw

Mushroom top Phillips screw

Mushroom top inner hex screw

Beveled head Phillips screw

Connection wire

(14*15)

STEP 1 Assemble the Pedestal

9

4. ASSEMBLE THE PRODUCT

Please follow instructions below to assemble this elliptical trainer. Note: For brevity,

throughout this manual, the word "screws" is used where screws, washers, and other

hardware may be involved. Also, the words "left" and "right" are used in reference to

the product and its parts. Note that, as such, these designations correspond to the

left and right sides of a person in position to work out on the product. Also note that

some parts are marked "L" for left or "R" for right.

Please follow steps (a-b) to secure the pedestal.

(a) Lift the pedestal (A1).

(b) Secure all screws (10) in sequence. Secure screws in area A, followed by those in

area B. Then secure screws in area C, followed by those in area D.

(b)

(a)

10

STEP 2 Assemble Moving Parts

Follow instructions (a) through (e) to

install the moving parts.

(a) Remove screws (21) from the stride

arm attached to the main frame (A1).

(b) Once slip the glide rail into (Part A),

then place the pedal carriage lightly

on the glide rail support.

(c) Connect the guide roller (14) on the

bottom of the glide rail. (Please note

the direction to insert the screw is from

outside to inside)

(d) Separate the roller covers (A7). Snap

them together into place on the

product. Then secure them with screws

(21).

(e) On the left side of the product, remove

the screw (22) from the stride adjustment

linkage. Place the stride adjustment

linkage into place on the bushing, and

use the screw (22) to secure it into place.

Then press the stride adjustment linkage

cover (11) into place. Carry out the same

procedure on the right side of the

product as well.

STEP 2 Assemble Moving Parts (continued)

Consult the manual and follow all

assembly instructions carefully.

Please note that incorrect assembly

may present a danger to the exerciser,

will damage the elliptical and void the

warranty.

!

STEP 3 Install the Support Tubes

Follow steps (a-b) to secure the left and right support tubes into place.

(a) Remove support tube screws (23) (24) from the main frame (A1).

(b) Insert left and right support tubes (A8, A9) onto the axle and base, and loosely

secure them in place with the screws (23, 24).

11

(b)

(a)

12

STEP 4 Install the Stationary Handlebar

Follow steps (a-c) to install the stationary handlebar.

(a) Remove screws (25) from the left and right support tubes (A8, A9). Insert the

stationary handlebars (A2) in place. Use screws (25) to secure them. Fully secure

screws in area A.

(b) Remove screws (26) from the sides of the left and right support tubes (A8, A9).

Snap axle covers (A4, A5) into place on left and right sides. And use screws (A6)

to secure them.

(c) After securing screws in area B, slide support tube covers down onto the base.

(c)

(b)

(a)

13

STEP 5 Install Stoppers and Covers

Follows steps (a-c) to install glide rail stoppers.

(a) Screw stoppers (12) into place on both glide rails.

(b) Remove screws (27) from the frame (A1).

(c) Snap pedestal covers (A3) together on the unit. Loosely secure screws (27),

followed by screws (13). After all screws are in place, secure them.

(c)

(b)

(a)

14

STEP 6 Install the Footplate

Follow steps (a-c) to install the footplate.

(a) Remove screws (28) from the pedal carriage as shown.

(b) Push upward on the nibs in the cushion, and lift the front and back part of the

cushion to expose four screw holes. (Note: Maintain the connection at pivot point

A.) Use screws (28) to secure the footplate to its mount on the pedal carriage.

First secure area B, then secure area C. Insert the nibs on the cushion into the

Holes on the footplate on the pedal carriage (A10).

(b)

(a)

15

STEP 7 Move the Product into Place

(a) For one person: Grip the front base of the product and lift upward, then push the

product into location for use. Be careful to avoid pinching fingers when setting the

product down.

(b) For two people: Have one person grip the front base of the product while the

other person grips the support tubes (A8, A9). With both people lifting and

stabilizing the unit, roll it into place for use. Be careful to avoid pinching fingers

when setting the product down.

(b)

(a)

16

STEP 8 Level the Product

For the user's safety and the product's proper functioning, this elliptical trainer must

sit level on a flat floor. If necessary, please adjust product levelers by following steps

(a-c).

(a) Loosen the leveler nut.

(b) Rotate the leveler foot downward so it firmly touches the floor.

(c) To secure this position, secure the leveler nut upward against the product frame.

(c)(b)(a)

STEP 9 Install the Boost Converter Box

17

Note: A ground wire and the following instructions are required by European safety

standards. The ground wire is not required by North American safety standards.

To avoid electric shock and current leakage, this product has an exterior ground wire.

For your safety, connect this ground wire to the unit and to the building ground.

Installation instructions: Please use screws and washers to secure one end of the

ground wire to the product frame as shown and the other end to the building

electrical ground.

Page is loading ...

SportsArt G872 Owner's manual

Related papers

Other documents