APPASO 23-Inch Handmade Single Bowl Kitchen Sink Undermount, Commercial 18-Gauge Stainless Steel 10-Inch Deep Drop-In Laundry Utility Sink, R231810 User manual

Brand
APPASO
Model
23-Inch Handmade Single Bowl Kitchen Sink Undermount, Commercial 18-Gauge Stainless Steel 10-Inch Deep Drop-In Laundry Utility Sink, R231810
Category
Kitchen sinks
Type
User manual

APPASO 23-Inch Handmade Single Bowl Kitchen Sink Undermount, Commercial 18-Gauge Stainless Steel 10-Inch Deep Drop-In Laundry Utility Sink, R231810 is a high-quality sink made of 18-gauge premium grade T304 stainless steel with a satin brush finish. It is designed for undermount installation and features a 10mm radius corners and an ultra-thick silencer pad that provides excellent sound insulation. The sink comes with a US standard 3 1/2 inch drain strainer, fasteners, a bottom grid, and a towel. It is easy to clean and maintain, and it is resistant to rust and corrosion.

APPASO 23-Inch Handmade Single Bowl Kitchen Sink Undermount, Commercial 18-Gauge Stainless Steel 10-Inch Deep Drop-In Laundry Utility Sink, R231810 is a high-quality sink made of 18-gauge premium grade T304 stainless steel with a satin brush finish. It is designed for undermount installation and features a 10mm radius corners and an ultra-thick silencer pad that provides excellent sound insulation. The sink comes with a US standard 3 1/2 inch drain strainer, fasteners, a bottom grid, and a towel. It is easy to clean and maintain, and it is resistant to rust and corrosion.

APPASO Kitchen Sink
INSTALLATION
MANUAL
Model: R231810
DIMENSIONS
• Outside Dimensions 23” X 18” Depth 10"
• Inside Dimensions 21” X 16” Depth 10"
• US Standard 3 1/2 inch drain strainer
FEATURES
• 18 Gauge premium grade T304 stainless steel
• Satin brush finish
• Ultra-thick silencer pad and fully covered under and
around
• 10mm radius corners
01
PACKING INCLUDED
02
Sink
Fasteners
Strainer
Bottom Grid
Towel
Cutout Template
TOOLS
Safety glasses Marker tape measure
Silicone adhesive sealant Bladed screwdriver
Screws Electric drill
UNDERMOUNT INSTALLATION
03
Step 1
Cut out the countertop using the template inside
The Box.
Step 2 Step 2
After completing the cutting position (as
shown in the template), drill according to the
thickness of the countertop material.
Step 3
Apply silicon beads evenly along the edge
below the work surface.
8
04
Step 4
Position the sink and align the openings.
Press the sink into the silicone seal.
Step 5
After realigning the alignment, insert the
anchor into the hole and tighten the screw
to clamp the clip bracket to the edge of
the sink.
Step 6 Finally, remove excess silicon to make the sink look good.
MAINTENANCE INSTRUCTIONS
FAQs
1. Why is my new sink rusting?
Reasons:
Rusting may be caused by the welding of certain parts of the sink, the
accumulation of cement or oil slag. If it is not cleaned on time, it will cause the
sink to rust. It should be cleaned in time after each use.
. Every time you use the kitchen sink, there are chemicals, detergents, paints,
sauces or cooking oils. After a period of accumulation, these molds will stick to the
surface and cause rust.
Prevention and Treatments:
Clean the flume, especially chemicals, after installing the sink.
Clean your sink after every use.
Use brush to remove rust and rubbish.
2. What will scratch or harm the sink?
Reasons:
. Improper packaging and collision of the fittings in the friction tank during
transportation can cause scratches. APPASO will try its best to lay the sink and
avoid scratches.
Sharp objects can also scratch the sink
Prevention and Treatments:
Mild scratches: You can use a sponge containing toothpaste to polish it.
Moderate scratches: Use a scouring pad to polish small areas.
Serious scratch: Purchase stainless steel polisher.
3. What cause the hard water stains?
Reasons:
If you use the sink after a while, this is the material property of the metal
itself, which is normal.
Prevention and Treatments:
Detergents can be easily solved.
Clean Daily. Use a soft towel to wipe the sink with warm water.
Mixing in some washer-fluid is advisable. Remember wipe it dry at last.
05
DO DO NOT
Clean Daily. Clean every day. Wipe the sink with
warm water with a soft towel. It can be mixed in some
washing liquid. Remember to dry it.
Remember to rinse and dry the sink after use.
If minerals and sediments are deposited on the
sink, clean it up as quickly as possible.
Properly remove the rust, molds or
scratches with a scouring pad. Rubbing the
sink in the direction of the grain.
Remove rust, mold or scratches properly with wipe
pad. Wash the sink in the direction of the outlet.
Keep the sink dry after you use it. Because
any standing water can cause a buildup of
mineral deposit, which will become hard water
stains.
1.Get a dry and clean non-scratch
scrub pad
2.Scrub the rust off according to
the direction of the grain.
06
Do not immerse steel vessels in the sink for
a long time, which makes it easy to create rust
stains on the surface of the sink.
Do not put detergent or bleach in the sink for
a long time, which will make the sink change
color or damage the surface.
Do not rub the surface of the sink with metal sharp
products such as wire balls or metal mats.
Do not use internal sinks as cutting surfaces.
STAINLESS STEEL HANMADE KITCHEN SINKS
Suggested reminder:
• Check all the matching products inside when opening the package.
• Check the sink for obvious damage before installation.
• Read the installation and maintenance instructions thoroughly before installation.
• APPASO suggests using experienced and professional installers.
• APPASO does not responsible for any damage to countertop, sink fixture, faucet and personal injury
during installation.
APPASO DIRECT
If you like our product, please share it with your friends.
CONTACT US
Mailbox：cs@appasofaucet.com
07
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8

APPASO 23-Inch Handmade Single Bowl Kitchen Sink Undermount, Commercial 18-Gauge Stainless Steel 10-Inch Deep Drop-In Laundry Utility Sink, R231810 User manual

Brand
APPASO
Model
23-Inch Handmade Single Bowl Kitchen Sink Undermount, Commercial 18-Gauge Stainless Steel 10-Inch Deep Drop-In Laundry Utility Sink, R231810
Category
Kitchen sinks
Type
User manual

APPASO 23-Inch Handmade Single Bowl Kitchen Sink Undermount, Commercial 18-Gauge Stainless Steel 10-Inch Deep Drop-In Laundry Utility Sink, R231810 is a high-quality sink made of 18-gauge premium grade T304 stainless steel with a satin brush finish. It is designed for undermount installation and features a 10mm radius corners and an ultra-thick silencer pad that provides excellent sound insulation. The sink comes with a US standard 3 1/2 inch drain strainer, fasteners, a bottom grid, and a towel. It is easy to clean and maintain, and it is resistant to rust and corrosion.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents