PARLOS 8 Inch Two Handles High Arch Kitchen Sink Faucet Installation guide

Type
Installation guide
1
4
1
Hot
Cold
Cold
Hot
Rags
1/2" FIP Hose
Installation Guide
R
1 SHUT OFF WATER SUPPLIES. Remove old faucet.
Place gasket (1) on bottom of new faucet. If your model has a spray,
proceed to step 2. If your model does not have a spray skip to step 4.
6 FOR MODELS WITHOUT SPRAY: FLUSH SYSTEM/CHECK FOR
LEAKS.
Remove aerator (1). Turn on hot and cold water supplies. Turn handles
to full open position for one minute. Check for leaks at arrows. Replace
aerator.
4 CONNECT TO WATER SUPPLIES. (HOOK-UPS NOT PROVIDED).
2 Place faucet through mounting holes in sink.
OPTION: If sink is uneven, use silicone sealant under the gasket.
3 Secure faucet to sink using locknuts (1) provided.
5 Connect and tighten the supply hoses.
Check for leaks.
Please contact rst ,
If you have any questions or need help.
R
1
1
1
Rags
1/2" FIP Hose
Installation Guide
R
Please contact rst ,
If you have any questions or need help.
R
1 Mount spray support (1) in far right hole in sink. 2 Connect the spray hose to the faucet. (1) 3 FOR MODELS WITH SPRAY: FLUSH SYSTEM/CHECK FOR LEAKS.
Remove aerator (1), spout bonnet (2) and spout (3). Replace spout and
spout bonnet. Turn on hot and cold water supplies. Turn handles to full
open position for one minute. Check for leaks. Replace diverter and
aerator.
3
1
2
  • Page 1 1
  • Page 2 2

PARLOS 8 Inch Two Handles High Arch Kitchen Sink Faucet Installation guide

Type
Installation guide

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI