Livex Lighting 52111-35 Operating instructions

Livex Lighting
Brand
Livex Lighting
Model
52111-35
Type
Operating instructions

This manual is also suitable for

Livex Lighting 52111-35 is a ceiling light fixture that provides both style and functionality to your home. With its easy installation process, you can quickly and easily update the look of any room. The fixture comes with all the necessary hardware, including mounting screws, junction box screws, and wire nuts, so you can get started right away.

The 52111-35 is designed to be used with incandescent light bulbs, and it can accommodate up to three 60-watt bulbs. This provides plenty of light for even the largest rooms. The fixture also features a frosted glass shade that helps to diffuse the light, creating a warm and inviting ambiance.

Livex Lighting 52111-35 is a ceiling light fixture that provides both style and functionality to your home. With its easy installation process, you can quickly and easily update the look of any room. The fixture comes with all the necessary hardware, including mounting screws, junction box screws, and wire nuts, so you can get started right away.

The 52111-35 is designed to be used with incandescent light bulbs, and it can accommodate up to three 60-watt bulbs. This provides plenty of light for even the largest rooms. The fixture also features a frosted glass shade that helps to diffuse the light, creating a warm and inviting ambiance.

ASSEMBLING & INSTALLATION INSTRUCTIONS
The drawing shown may not exactly match the product enclosed.
However, the installation instructions do apply to this product.
52111
WARNING! SHUT POWER OFF AT FUSE OR CIRCUIT BREAKER.
ATTENTION! COUPER LE COURANT AU FUSIBLE OU UN DISJONCTEUR.
ASSEMBLING THE FIXTURE (Fig.1)
1. Shut off the power at the circuit breaker box. Remove old fixture and all
hardware from Junction Box. The junction box is not include.
2. Carefully unpack your new fixture and lay out all the parts on a clear area. Take
care not to lose any small parts necessary for installation.
3. Slide the electrical wires (lamp holder ‘E’) through the tubes(D)/(C)/(B) and
canopy(A).
4. Raise the tube(D) to top screw pipe of lamp holder(E), raise the tube (C) ,tube
(B) and canopy(A) to the screw pipe in order , then by turning it clockwise until
tight.
5. Attach the glass(F) insert to the lamp holder, rotate the glass until tighten.
6. Install the light bulb(not included) in accordance with the fixture specifications
NOTE: DO NOT EXCEED THE SPECIFIED WATTAGE!
7. Thread the two mounting screws into the pre-drilled holes in the Mounting plate
spaced the same distance apart as the holes in the canopy (A).
8. Attach the Mounting plate to the Junction Box with the two Junction Box screws
as shown. The side of the Mounting plate marked "GND" must face to out.
9. While holding the fixture lamp towards the ceiling , connect the electrical wires
as Shown in Fig.2, making sure that all wire nuts are secured. You may have to
wrap the connections with electrical tape. If your outlet has a ground wire (green
or bare copper), connect the fixture ground wire to it. Otherwise connect
fixture’s ground wire directly to the Mounting plate with the green screw
provided. After wires are connected, tuck them carefully inside the Junction
Box.
10. Raise the canopy (A) on to the Junction box, aligning screws on mounting
plate with mounting holes in canopy and lock it securely with the ball nuts.
Your installation is now complete. Return power to the junction box
the fixture.
FIXTURE
WIRES
Black or
Smooth
HOUSE
WIRES
Black(Hot)
FIXTURE
WIRES
White or
Ribbed
FIXTURE
WIRES
Bare
Copper
(Ground)
HOUSE
WIRES
White
(Neutral)
HOUSE
WIRES
Green or Bare
Copper(Ground)
Thank you for purchasing a LIVEX product.
Need assistance with parts or assembly? Please call customer service at: 800-761-8056
Or visit us online at: WWW.LIVEXLIGHTING.COM
©COPYRIGHT ALL RIGHTS RESERVED.LIVEX LIGHTING,INC. DOC20151252111
FIG.2
FIG.1
  • Page 1 1

Livex Lighting 52111-35 Operating instructions

Livex Lighting
Brand
Livex Lighting
Model
52111-35
Type
Operating instructions
This manual is also suitable for

Livex Lighting 52111-35 is a ceiling light fixture that provides both style and functionality to your home. With its easy installation process, you can quickly and easily update the look of any room. The fixture comes with all the necessary hardware, including mounting screws, junction box screws, and wire nuts, so you can get started right away.

The 52111-35 is designed to be used with incandescent light bulbs, and it can accommodate up to three 60-watt bulbs. This provides plenty of light for even the largest rooms. The fixture also features a frosted glass shade that helps to diffuse the light, creating a warm and inviting ambiance.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents