Page is loading ...
iPod & iPhone FM Transmitter
PLPADFM1
www.PyleAudio.com
iPad & iPhone FM Transmitter Installation Guide
& User Manual
Features:
Power and charge your iPod, IPhone, IPhone3G & Ipad simultaneously through the
30-pin dock connector.
Digital FM tuner with LED display.
Full frequency, from 87.5~108.0MHz, 0.1Mhz gap between channels
Support Line-in; automatically play the music from external audio devices. (Mp3; CD
player etc.)
Last frequency and song memory function.
Charge your mobile phone, MP3 player and so on through the USB port.
Flexible goose neck, easily reposit, convenient and safe
Removable stoppers to keep the device in holder steadily.
High quality silicon gel on the back & sides to protect your device from being damaged.
Specifications:
FM transmitting range: 87.5~108.0MHZ (Total 206 channels)
Transmit distance: more than 10 meters
Frequency response: 20Hz-20 KHz
Support: USB, Audio cable (line- in)
Audio Input the interface: 3.5mm stereo jack
Working voltage: DC 12V~24V
Installation:
1. Set up the car mount suction cup on the windshield or any other smooth surface in the car.
Just hold it in the position you want and lock it.
2. Connect the car charger and the unit through the mini USB socket.
3. Place your ipod/iphone/ipad into the holder; adjust the flexible clamp by pressing the
crandle lock release button, and fix your devices steadily.
4. Turn on your car radio and turn to a bare FM channel. Then press the CH+/CH- buttons
beside the display to set the frequency of the fm transmitter the same as that of the radio.
Then it will automatically play the music from your devices.
Note: USB charger slot can charge your mobile phone and other digital players, when
you use IPAD or Iphone, please do not charge your mobile phone or other digital player
synchronously for the limit power supply!
For use with your iPad:
For use with iPhone:
/
