GE AJES10DSB Specification

GE
Brand
GE
Model
AJES10DSB
Category
Equipment cases
Type
Specification

GE AJES10DSB is a 230-volt window/wall mount heat and cool unit with a 9900/9700 BTU cooling capacity and 11,600/9480 BTU heating capacity. It features mechanical controls, a variable position thermostat, four-way air direction, and a washable air filter. With two cool, two heat, and two fan-only speeds, this unit provides customizable comfort options.

GE AJES10DSB is a 230-volt window/wall mount heat and cool unit with a 9900/9700 BTU cooling capacity and 11,600/9480 BTU heating capacity. It features mechanical controls, a variable position thermostat, four-way air direction, and a washable air filter. With two cool, two heat, and two fan-only speeds, this unit provides customizable comfort options.

AJES10DSB – GE
®
230 Volt Window/Wall Mount Heat and Cool Unit
GE Appliances
26
15-5/8
16-7/8
Wall Case Dimensions (in inches)
Note:
When installing slide-out chassis units in through-the-wall
applications, keep louvers free. Do not restrict air flow areas.
Note: This unit is note intended to be the primary source of heat.
Specification Created 11/03
390302
R
R
Total capacity and E.E.R.
ratings are calculated
based on the Association
of Home Appliance
Manufacturers’ standards.
Listed by
Underwriters
Laboratories
For answers to your Monogram,
®
GE Profile
™
or
GE
®
appliance questions, visit our website at
GEAppliances.com or call
GE Answer Center
®
service, 800.626.2000.
230/208V
20 Amp
Perpendicular
GE Appliances
AJES10DSB – GE
®
230 Volt Window/Wall Mount Heat and Cool Unit
Dimensions (in inches)
Installation Information: A finished opening of 26-1/8" x 15-3/4" clear
of intrusions is required. Keep clearance of 4" from side walls. Brick
veneer or frame walls should have wood studding surrounding case to
provide firm anchoring with screws. Case can be fastened directly to
brick or block walls with screws sunk in lead expansion shields.
Note: Units should be caulked on all four sides of case to the building
exterior to assure building integrity.
Two Wall Cases for Tenant Option Installation
When the air conditioner is offered as a tenant option, these wall
cases provide protection against outside elements.
RAB47 – includes wall case, exterior grille and steel closure panels.
RAB48 – includes wall case, exterior grille, steel closure panel and
two layers of insulation.
Standard Wall Case RAB46
Solid-sided wall case fabricated of galvanized steel with baked enamel
finish. Welded areas are coated with a sealing compound to help resist
rust and corrosion. Polymer gasket surrounds opening to assure tight
weather seal. Aluminum grille (RAG13) is included. Panels on interior and
between case and grille provide weather protection prior to installation
of chassis.provide firm anchoring with screws. Case can be fastened
directly to brick or block walls with screws sunk in lead expansion shields.
Brick Block and Brick
Frame Construction
Fill open cells
with mortar
or insulation
15-3/4
26-1/8
Lintel
Make frame if desired or caulk
between case and siding
15-3/4
26-1/8
Frame Construction
Lintel
OUTSIDE INSIDE
16-7/8
Caulking
Drip Rail
Trim Molding
(if desired)
Plaster Line
Flexible Mounting Position
Specification Created 11/03
390302
R
R
Total capacity and E.E.R.
ratings are calculated
based on the Association
of Home Appliance
Manufacturers’ standards.
Listed by
Underwriters
Laboratories
For answers to your Monogram,
®
GE Profile
™
or
GE
®
appliance questions, visit our website at
GEAppliances.com or call
GE Answer Center
®
service, 800.626.2000.
GE Appliances
AJES10DSB – GE
®
230 Volt Window/Wall Mount Heat and Cool Unit
Features and Benefits
• 9900/9700 BTU
• 11,600/9480 BTU heat
• 3670/3010 Watts heat
• 9.5/9.5 EER
• 230/208 Volts
• Mechanical controls
• Variable position thermostat
• Four-way air direction
• Up-front, washable air filter
• 2 Cool/2 heat/2 fan only speeds
• Model AJES10DSB – Cameo White
Specification Created 11/03
390302
  • Page 1 1
  • Page 2 2
  • Page 3 3

GE AJES10DSB Specification

GE
Brand
GE
Model
AJES10DSB
Category
Equipment cases
Type
Specification

GE AJES10DSB is a 230-volt window/wall mount heat and cool unit with a 9900/9700 BTU cooling capacity and 11,600/9480 BTU heating capacity. It features mechanical controls, a variable position thermostat, four-way air direction, and a washable air filter. With two cool, two heat, and two fan-only speeds, this unit provides customizable comfort options.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers