Ekena Millwork MLD01X01X01ED-CASE-2 Installation guide

Brand: Ekena Millwork

Model: MLD01X01X01ED-CASE-2

Type: Installation guide

CROWN MOULDING

installation instructions:

construction adhesive

caulk

caulking gun

nishing nails

miter saw

paint

chalk line box & pencil

TOOL & MATERIAL

CHECKLIST

IMPORTANT INFO

• It is highly recommended that you paint or nish moulding with 100% acrylic latex paint before

installation.

• Once installed, you can apply any necessary touch‐up paint or nish.

• ‐Place moulding in room 2 to 3 days prior to installation. This allows the moulding to adjust to the

temperature of the room.

• ‐Clean installation surface and back of moulding of all dirt and dust with a clean cloth or sponge.

Make sure that the surface and the back of the moulding are completely dry before attempting

installation.

SAFETY INSTRUCTIONS

Make sure to use the correct tools recommended.

Wear safety goggles.

Follow xture, power tools, and paint manufacturers’ instructions and users manuals.

Use common sense and follow good construction practices.

Mitering Corners

1. Place moulding in the miter box with the wall side against the side of the

miter box opposite you and the ceiling touching side against the bottom of

the box.

2. Cut miters and butt joins prior to installation.

Crown Moulding Installation

1. Prep universal corners and moulding by trimming and matching up detail as

necessary.

2. Apply a continuous 1/2” bead of construction adhesive along the top and

back of moulding lengths and universal corners. Adhesive should be used

to ll any gaps. Press moulding into place. Finishing nails should be used to

secure moulding.

3. Apply caulk in remaining gaps and smooth with nger or putty knife.

4. Touch‐up moulding as needed.

FINISHING

NAILS

WALL

CONSTRUCTION

ADHESIVE

CEILING

We Can Help. Call (866) 607-0453

www.ekenamillwork.com

Industry leading manufacturer of urethane, PVC, wood, rustic, and metal millwork

Ekena Millwork MLD01X01X01ED-CASE-2 Installation guide

Ekena Millwork MLD01X01X01ED-CASE-2 Installation guide

Ekena Millwork MLD01X01X01ED-CASE-2 Installation guide

Related papers

Other documents