Furuno FR-2855 Installation guide

C

9-52, Ashihara-cho,

Nishinomiya, Japan

Telephone: 0798-65-2111

Telefax: 0798-65-4200

Your Local Agent/Dealer

All ri

g

hts reserved.

PUB. No. IME-34190-D

FAR/FR-2855

(

TATA

)

FIRST EDITION : DEC. 2000

D : JUL. 18, 2000

Printed in Japan

iv

TABLE OF CONTENTS

1. MOUNTING

1.1 Assembling the Scanner Unit...........................................................................................1-2

1.2 Mounting the Scanner Unit on the Mounting Platform ...................................................1-4

1.3 Mounting the Display Unit ..............................................................................................1-8

1.4 Mounting the Separate Type Control Panel .....................................................................1-9

1.5 Power Supply Unit.........................................................................................................1-10

2. CONNECTIONS

2.1 Antenna Unit Connections ...............................................................................................2-1

2.2 Power Supply Unit PSU-001 ...........................................................................................2-5

2.3 Power Supply Unit PSU-004 ...........................................................................................2-7

2.4 Display Unit Connection .................................................................................................2-8

3. INITIALIZATION AND ADJUSTMENT

3.1 Preparation for Initialization and Adjustment..................................................................3-1

3.2 Heading Alignment ..........................................................................................................3-2

3.3 Adjusting Sweep Timing .................................................................................................3-2

3.4 Adjusting Video Signal Level ..........................................................................................3-3

3.5 Suppressing Main Bang ...................................................................................................3-4

3.6 Confirming Tuning ..........................................................................................................3-4

3.7 Adjustment .......................................................................................................................3-5

3.8 Initial Settings Menus ......................................................................................................3-6

3.9 Setting the Function Keys................................................................................................3-8

3.10 Menus for Initialization and Adjustment .....................................................................3-11

3.11 Adjusting the ARP Board.............................................................................................3-12

3.12 Installation Check List .................................................................................................3-14

4. INSTALLATION OF GYRO CONVERTER GC-8 (option)

4.1 General Procedure for Installing and Setting up the GYRO CONVERTER Board ........4-1

4.2 Connection of External Power Supply ............................................................................4-3

4.3 Confirming Gyrocompass Specifications ........................................................................4-3

4.4 Changing Settings on the GYRO CONVERTER Board .................................................4-4

4.5 Setting the Bearing on the Radar Display........................................................................4-8

LIST OF INSTALLATION MATERIALS,

ACCESORIES AND SPARE PARTS ..............................................L-1

OUTLINE DRAWINGS ....................................................................D-1

INTERCONNECTION DIAGRAMS .................................................S-1

SCHEMATIC DIAGRANS ...............................................................S-2

Page is loading ...

Furuno FR-2855 Installation guide

This manual is also suitable for

Furuno FR-2855 Installation guide

Related papers

Other documents