BenQ VB3733 Quick start guide

Table of Contents i

English

Section 1: Quick Start Guide .................................. 1

1. Please read these instructions ...........................................2

What’s in the Quick Start Guide? ................................................. 2

What’s in the User Manual? .......................................................... 2

2. Package contents ...............................................................2

3. Select and prepare the installation location .....................3

4. Installing the swivel (VB3233 model only) ......................4

Important safety notes ................................................................... 4

Installing the swivel ....................................................................... 4

5. Connect the antenna cable ................................................5

6. Connect the power cord ...................................................5

7. Adjust the viewing angle ...................................................6

8. Activate the remote control ..............................................6

Remote control usage tips ............................................................. 7

Test the remote control ................................................................ 7

9. Initialize your TV ..............................................................8

10. View the TV programs ....................................................9

Care and cleaning information .............................................9

What's next? ...........................................................................10

Section 2: User Manual ........................................... 11

Introduction ...........................................................................12

Getting to know your TV ......................................................12

Input options ................................................................................. 12

Analog TV source inputs ............................................................... 12

Video source inputs ....................................................................... 13

Graphic source inputs ................................................................... 13

Front view ...................................................................................... 13

Control panel (right side view) ..................................................... 14

External AV devices terminal panel (left side view) .................... 15

Rear view ........................................................................................ 16

Getting to know the remote control .....................................17

Using the remote control ......................................................20

Power on, off and standby ....................................................20

Turning the TV on ........................................................................ 20

Putting the TV to standby ............................................................. 20

Selecting an input source ......................................................20

Selecting the TV input directly ..................................................... 20

Table of Contents

V32B_V37B_EN.book Page i Wednesday, January 23, 2008 10:55 AM

Table of Contentsii

English

Switching to other input sources (except the TV input) ............. 20

Adjusting sound settings ...................................................... 21

Adjusting volume .......................................................................... 21

Mute setting ................................................................................... 21

Turning on/off the Surround sound effect .................................. 21

Selecting a preset EQ mode ........................................................... 21

Changing programs .............................................................. 21

Selecting a program directly .......................................................... 21

Changing programs sequentially .................................................. 21

Returning to the previous viewed program or input ................... 21

Jumping to your favorite channels ............................................... 22

Using the freeze function ...................................................... 22

Selecting a picture mode ....................................................... 22

Using the sleep timer ............................................................ 22

Adjusting backlight ............................................................... 23

Using the Teletext function .................................................. 23

Displaying information ........................................................ 23

Adjusting aspect ratio ........................................................... 24

Connecting audio and video inputs ..................................... 25

Connecting the Composite Video input ...................................... 25

Connecting the S-Video input ...................................................... 26

Connecting the Component Video input .................................... 26

Connecting the PC D-Sub input ................................................... 27

Connecting the DVI input ............................................................ 27

Connecting the HDMI input ........................................................ 28

Connecting the stereo audio output ............................................. 28

Connecting the headset audio output .......................................... 29

OSD (On-Screen Display) menu .......................................... 30

OSD structure ....................................................................... 30

Navigating the OSD menu ................................................... 31

Operations in the OSD menu ....................................................... 31

Audio menu .......................................................................... 32

Setting up the Personal EQ Mode ................................................. 33

Picture menu ......................................................................... 34

Using the Picture Modes ............................................................... 35

Adjusting the contrast ................................................................... 36

Adjusting the brightness ................................................................ 36

Setting up the Personal Picture Mode .......................................... 36

Senseye menu ........................................................................ 37

TV menu ................................................................................ 38

Performing manual installation .................................................... 38

Editing programs ........................................................................... 39

Setting up favorite channels .......................................................... 41

V32B_V37B_EN.book Page ii Wednesday, January 23, 2008 10:55 AM

Table of Contents iii

English

Child Lock ...................................................................................... 42

Setup menu ............................................................................43

Reference ................................................................................44

Disclaimer ..............................................................................44

Copyright ...............................................................................44

Battery safety notice ..............................................................44

Dimensions ............................................................................45

Specifications .........................................................................47

Supported PC (D-Sub/DVI) input signal resolutions .........48

Supported Component Video input signal resolutions ......48

Supported HDMI input signal resolutions ..........................49

Setting up appropriate output resolution on PC ......................... 49

Troubleshooting ....................................................................50

V32B_V37B_EN.book Page iii Wednesday, January 23, 2008 10:55 AM

Table of Contentsiv

English

<Memo>

V32B_V37B_EN.book Page iv Wednesday, January 23, 2008 10:55 AM

Welcome

English

VB Series LCD TV

Section 1: Quick Start Guide

V32B_V37B_EN.book Page 1 Wednesday, January 23, 2008 10:55 AM

Section 1: Quick Start Guide2

English

1. Please read these instructions

Congratulations on your purchase of the BenQ VB series LCD TV. You have a

state-of-the-art flat widescreen digital LCD TV which should provide you

with years of viewing pleasure. Please take a few minutes to read these quick

start instructions through before installing and using the TV.

What’s in the Quick Start Guide?

Section 1 contains the Quick Start Guide which provides you with enough

information to get familiar with and setup the TV. This is section 1.

What’s in the User Manual?

Section 2 contains the User Manual which details the features and functions

of the TV, and provides product specifications and troubleshooting

information for your further assistance. The User Manual also describes how

to customize the TV settings so that you can gain the best viewing experience

possible to suit your preferences and viewing environment.

2. Package contents

Unpack the TV and check that all the following items are included:

• The separate swivel and plastic rings are only available with the VB3233 model.

The VB3733 model has a factory pre-assembled swivel.

• The type of power cable supplied may differ from that illustrated, dependant

upon your region of purchase.

If any item is missing or damaged, contact your place of purchase

immediately. Please keep the documentation in a safe place for later reference.

Dispose of packaging wisely:

• The cardboard carton (box) can be recycled.

• Do not leave plastic bags within reach of young children or babies.

• Consider storing the packaging (if possible) for future transport of the TV.

• Check that you haven't left any accessory inside the packaging before

discarding.

For the primary safety of yourself and others, this TV should be handled with care

to avoid damage to it or to persons which come into contact with it.

All Liquid Crystal Display (LCD) screens have a very thin protective layer of

glass which is liable to marking or scratching, and cracking if struck or

pressured. The liquid crystal substrate is also liable to damage under excessive

force or extreme temperatures. Please handle with care.

LCD TV (x1) Power cord (x1) Composite Video

(AV) cable (x1)

Swivel* (x1) Plastic ring*

(x2)

Quick Start Guide/

User Manual (x1)

Warranty

information (x1)

Remote control

(x1)

AAA battery (x2)

V32B_V37B_EN.book Page 2 Wednesday, January 23, 2008 10:55 AM

Section 1: Quick Start Guide 3

English

3. Select and prepare the installation location

In order to prevent potential dangers and prolong the service life of the TV,

please observe the following points when installing, operating and cleaning

the TV.

Do NOT place the TV on an

uneven, sloping or unstable

surface where it may fall and cause

damage to itself or others. Have a

qualified technician secure the TV

in case there is an earthquake.

Do NOT place the TV in an

enclosed place without allowing

for ventilation.

Observe all warnings and cautions

as labelled on the TV.

Do NOT place the TV near water,

like a spa or pool, or in a position

which will allow the splashing or

spraying of water onto the TV, like

in front of an open window where

rain water may enter.

Do NOT cover or block the vents

and openings while the TV is

switched on, as the heat may

accumulate inside the TV and

result in danger.

Do NOT place the TV near or

above sources of heat, such as

radiators, heaters, fuel stoves and

other heat-generating items

(including audio amplifiers).

Otherwise heat may cause

damages to the outer casing as well

as the components inside.

Do NOT place the TV in direct

sun or where direct sun or spot

lighting will shine onto the TV, as

the heat may damage the TV and

the bright light will make viewing

the TV more difficult than

necessary.

If wall mounting, allow

appropriate space on top for

attaching the TV to the wall

bracket.

If recessed into a wall opening, you

must leave appropriate free space

both top and bottom for

mounting and removing the TV.

If wall mounting, disconnect all

cables and have a suitable qualified

and experienced technician mount

it safely. Use only a recommended

TV wall bracket for this model TV

and ensure that the mounting

brackets (optional accessory) are

securely screw fixed to the wall

structure, and not just the wall

render, lining or cladding. Ensure

the brackets are level horizontally.

Do not glue the brackets to the

wall.

This TV has no power switch.

When installing the TV,

incorporate a readily accessible

disconnect device in the fixed

wiring, or connect the power cord

to socket-outlet which must be

provided near the TV and easily

accessible. If a fault should occur

during operation of the unit,

operate the disconnect device to

switch the power supply off, or

disconnect the power cord.

V32B_V37B_EN.book Page 3 Wednesday, January 23, 2008 10:55 AM

Section 1: Quick Start Guide4

English

4. Installing the swivel (VB3233 model only)

Important safety notes

Please pay attention to the following before installing:

• For safety reasons, it is recommended that the installation be carried out by

at least two adult persons.

• The LCD panel of the TV is extremely fragile and subject to damages easily.

Avoid touching the LCD panel when installing or moving the TV, and take

precautions not to let any objects come into contact with the LCD panel. It is

recommended that you use a soft, clean and lint-free towel to protect the TV

and LCD screen when installing.

• Pay attention to the stability of the location where the TV will be placed.

Otherwise the TV may topple over and result in damages and personal

injuries. Have a qualified technician secure the TV in case there is an

earthquake.

Installing the swivel

1. With the wider side of the swivel

facing forward, install the plastic

rings on the swivel shaft.

2. Refer to the illustration for the

correct position of the plastic rings

on the shaft. Make sure that the

direction of the V-shaped part of

the plastic rings is correct.

3. Lift the TV up and insert the swivel

shaft into the swivel shaft hole on

the bottom of the TV at an angle of

30 degrees. When inserting, make

sure that the stoppers on the TV

are properly aligned and inserted

into the positioning holes on the

swivel base.

Plastic rings

Shaft

Wider

side

Plastic

rings

Shaft

Pay attention to

the V-shaped

part of the

plastic rings

30o

Stoppers

Positioning

holes

V32B_V37B_EN.book Page 4 Wednesday, January 23, 2008 10:55 AM

Section 1: Quick Start Guide 5

English

5. Connect the antenna cable

Connect a TV antenna cable fly-lead from your TV antenna system or Cable

TV (CATV) decoder box to the TV RF input socket on the TV (as shown in

the illustration below). Make sure that the cable connection is firmly in place.

• A poor quality TV signal will produce a poor picture and/or sound on your TV.

For high quality picture and sound, you will need a high quality TV signal.

Depending upon your location, for best TV signal reception, you should have a

properly aligned outdoor TV antenna system. If need be, consult a professional

antenna specialist.

• This TV has a built-in analog TV tuner, which requires the TV antenna cable

connection to an external TV antenna system or CATV decoder. If you wish to

make use of the digital LCD screen to view digital TV, you should connect an

external digital TV tuner (decoder) set top box (STB) to the TV using a digital

signal cable (HDMI or DVI) connection.

6. Connect the power cord

1. Locate the power cord from the packaging, and plug the appropriate end

into the AC-INLET socket on the rear of the TV (as illustrated below).

2. Plug the other end into an appropriate wall power outlet, and turn on the

switch (if the power outlet is switched). The TV will enter standby mode

and the power indicator (on the front lower right) will light up red.

4. After the shaft is completely

inserted, turn the TV so it faces

forward.

Antenna cable

TV RF input socket

AC-INLET

socket

Power

outlet

Power cord

V32B_V37B_EN.book Page 5 Wednesday, January 23, 2008 10:55 AM

Section 1: Quick Start Guide6

English

• The supplied power cord is suitable for use with 110-240V AC power only.

• The type of power cord plug and socket illustrated may differ from the type used

in your region.

• Only use an appropriate power cord for your region. Never use a power cord

which appears damaged or frayed, or change the plug type on the power cord.

• Be aware of the total loading when using extension cords or multiple outlet

power boards.

• This TV has no power switch. When installing the TV, incorporate a readily

accessible disconnect device in the fixed wiring, or connect the power cord to

socket-outlet which must be provided near the TV and easily accessible. If a

fault should occur during operation of the unit, operate the disconnect device to

switch the power supply off, or disconnect the power cord.

• WARNING: This TV has been engineered and manufactured with the highest

priority on safety, however, IMPROPER HANDLING OR USE CAN RESULT IN

POTENTIAL ELECTRICAL SHOCK OR FIRE HAZARD. Please handle this TV with

care. If damaged, turn off the power and unplug the power cord from the TV.

Transport the TV to your nearest BenQ authorised service centre for repair.

• There are no user serviceable parts in this TV. Never unscrew or remove any

covers. There are dangerous voltages inside. Turn off the power and unplug the

power cord before moving the TV.

7. Adjust the viewing angle

8. Activate the remote control

1. Locate the remote control and batteries from the packaging, and unwrap

them.

Be cautious when handling batteries. See "Battery safety notice" on page 44 for

more information.

This TV is equipped with a adjustable swivel base. If

necessary, turn the TV screen to an appropriate angle

(maximum 30 degrees left and right) for more

comfortable viewing.

2. Turn the remote control to reveal its back side, and

open the lid of the battery compartment.

3. Insert the batteries (supplied) ensuring that the

positive and negative marked battery terminals

match the (+) and (-) marks in the battery

compartment.

These batteries are provided for your convenience so

that you can operate the TV straight away. You should

replace them as soon as possible.

4. Refit the lid of the battery compartment as shown.

V32B_V37B_EN.book Page 6 Wednesday, January 23, 2008 10:55 AM

Section 1: Quick Start Guide 7

English

Remote control usage tips

• Do not cover the sensor window on the front of the TV (below the power

indicator lamp), or place objects in front of it which will block the direct line-

of-sight between the remote control and the sensor window on TV.

• Do not let the remote control become wet, or place it in humid environments

(like bathrooms.)

• If the remote control sensor window on the TV is in direct sunlight or strong

light, the remote control may not operate properly. In this situation, change the

light source or readjust the angle of your TV, or operate the remote control from

a location closer to the remote control sensor window on the TV.

Test the remote control

• Point and aim the top front of the

remote control directly at the TV

when pressing the buttons.

• The remote control must be held at

an angle within 30 degrees of the TV's

remote control sensor window to

function correctly. The distance

between the remote control and the

sensors should not exceed 6 meters. 30 degrees

6 meters

Press (Power/standby) on the remote control (as

highlighted in the illustration). The TV should turn on, and

the power indicator change to green. If so, progress to the next

step ("9. Initialize your TV" on page 8).

If the TV does not turn on, first check that the power is

available (the power indicator will be lit red). If so, try pressing

(Power/standby) on the right side of the TV. If the TV

turns on by this method, the problem lies with the remote

control. In that case, check that the remote control batteries

are properly installed. If need be, replace the batteries with

new ones or known good ones.

To put the TV to standby mode, press (Power/standby) on

the remote control, or (Power/standby) on the right side of

the TV again, and the TV will return to standby mode (the

power indicator will turn red.)

V32B_V37B_EN.book Page 7 Wednesday, January 23, 2008 10:55 AM

Section 1: Quick Start Guide8

English

9. Initialize your TV

When first turned on (and until tuned), the First Turn On menu will display:

Before you can use your TV to view TV programs, you need to let it search for

and tune TV station programs appropriate to your region. This process only

needs to be done when the TV is newly installed, or whenever you install it in

a new location. You also need to select your language for the on-screen display

(OSD) menu for convenience of operation.

1. Press or  on the remote control to select Language, and then press +

or - to select your language.

2. When you select a Language, the Country and TV Standard items will

change automatically to suit. If your country is not displayed in the

Country item, you can press or  to select it and then press + or - to

select your country. If Others is selected as the Country, you will also need

to select the TV broadcast standard suitable for your region (see page 38).

3. Press or  to select Auto Installation and then press OK. The following

menu will display:

4. Press or  to select Start and then press OK. The TV will start searching

for available programs and tune and store them for you. This may take

several minutes, depending on the available TV programs in your local

reception area. Please allow the TV to complete this tuning process. If you

want to stop this auto installation process, press OK.

5. When the tuning process is complete, the Program Edit menu will display.

You can now edit the stored programs if you want (see "Editing programs"

on page 39), or press MENU on the remote control to close it and start

viewing TV programs.

• You can alter the settings in the future using the OSD menu. See "OSD (On-

Screen Display) menu" on page 30 for more information.

• This LCD TV is a high resolution display device. To achieve the best possible

display results, it is recommended that you connect it to a digital video source,

and select an appropriate aspect ratio. See "Adjusting aspect ratio" on page 24.

Language English

Country Middle East

Standard BG

Auto Installation >

First Turn On

Country Middle East

Standard BG

Start

Auto Installation

V32B_V37B_EN.book Page 8 Wednesday, January 23, 2008 10:55 AM

Section 1: Quick Start Guide 9

English

10. View the TV programs

Care and cleaning information

• Always turn off the TV and disconnect it from the mains power before

cleaning.

• Do NOT use cream, liquid, aerosol or spray cleaners. Use only a slightly

damp well wrung-out (drip-free) and lint-free, clean soft cloth and lightly

wipe the TV.

• If necessary, use a pH-neutral liquid dish-washing detergent diluted with

water on a separate clean lint-free cloth to remove oil or grease marks. Wipe

over again with a clean dry lint-free cloth to remove any smear marks.

• Under close examination and in certain circumstances, you may notice that a

few non-active pixels appear on the screen as a fixed point of color. Please

note that this does not affect the performance of your product as it is usually

not visible at normal viewing distances.

• If the TV is not going to be used for an extended period of time (like when

you are going away for holidays), it should be switched off and unplugged

from the wall outlet. You should also consider removing the batteries from

the remote control (as they may leak).

• LCD (Liquid Crystal Display) screens, like plasma (PDP) and conventional

CRT (Cathode Ray Tube) screens, are also susceptible to 'screen burn-in' or

'image retention' which can be found on the screen as visible fixed lines and

To sequentially change the TV programs available in your area,

press the following buttons:

• P (Program)  or P (Program) on the remote control

(as highlighted in the illustration), or

•  or on the remote control, or

• or on the TV.

You can also change to a program directly by selecting the

station number using the numeric program selection

button(s) on the remote control:

• To select a single-digit program number, press the

corresponding program selection button. For example, to

select program 8, press .

• To select a two-digit program number, press (Program

entry), followed by the corresponding program selection

buttons. For example, to select program 28, press

(Program entry), and then , .

• To return to the previous viewed program or input, press

(Recall) (also highlighted in the illustration).

To alter the volume, press the following buttons:

• (Volume) + or (Volume) - on the remote

control (as highlighted in the illustration), or

• + or - on the remote control, or

• or on the TV.

V32B_V37B_EN.book Page 9 Wednesday, January 23, 2008 10:55 AM

Section 1: Quick Start Guide10

English

shades and can't be removed. To avoid such permanent damage to the screen,

it is advisable to take the following preventive actions:

• Avoid displaying still (inactive) image s for more than two hours.

• Change the screen image aspect ratio from time to time.

• If it is necessary to display still images for a long time, lower the contrast

and brightness.

• Turn on the ECO function when displaying PC input image (see "ECO" on

page 43).

What's next?

You have reached the end of Section 1: Quick Start Guide. By now, you should

have a reasonable understanding of your new LCD TV and its controls, know

how to install, connect, turn on and how to care for and maintain it.

Should you wish to maximize your viewing experience pleasure, Section 2 of

this booklet contains the User Manual which describes how to customise the

TV settings to suit your preferences and viewing environment. It details the

features and functions of the TV and provides product specifications and

troubleshooting information for your further assistance.

V32B_V37B_EN.book Page 10 Wednesday, January 23, 2008 10:55 AM

Welcome

English

VB Series LCD TV

Section 2: User Manual

V32B_V37B_EN.book Page 11 Wednesday, January 23, 2008 10:55 AM

Introduction12

English

Introduction

This booklet is divided into two sections: the Quick Start Guide; and the User

Manual. For details of the Quick Start Guide, see "1. Please read these

instructions" on page 2.

This is section 2, the User Manual which describes how to customize the TV

settings so that you can gain the best viewing experience possible to suit your

preferences and viewing environment. This section details the features and

functions of the TV and the remote control, describes how to connect to

other devices, and provides product specifications and troubleshooting

information for your further assistance.

Getting to know your TV

This LCD TV is a state-of-the-art flat widescreen digital display device. It has a

built-in analog TV tuner which can be used to view standard definition analog

television (TV or ATV), cable television (CATV), or radio frequency (RF)

modulated video through its coaxial TV tuner input socket.

However, the high display quality of a widescreen LCD TV isn’t realized

through analog TV. The highest possible quality display is only possible from

high definition digital video sources like High Definition TV (HDTV) and

High Definition DVD (HD-DVD).

Input options

This TV supports the simultaneous connection of several different types of

TV, Video and Graphic sources, and permits you to select available sources

you wish to view at any time. You can press INPUT on the remote control

or INPUT on the TV to select an input source.

There are multiple sockets on the TV for analog TV, Video, and Graphic

inputs (see also "External AV devices terminal panel (left side view)" on page

15 and "Rear view" on page 16):

• Analog TV source input includes: 1 × Coaxial analog TV antenna.

• Video source inputs include: 1 × S-Video, 1 × Composite Video (AV) and 1 ×

Component Video.

• Graphic source inputs include: 1 × HDMI/DVI and 1 × PC D-Sub.

You should connect whichever TV, Video or Graphic sources you wish to view

on the TV. You need not connect more than one if that one is all you wish to

view.

The simultaneous display of multiple pictures from different signal sources on

the screen (for example, the picture-in-picture function) is not supported.

Analog TV source inputs

You can connect an aerial VHF or UHF TV antenna (if available) to the TV

RF input socket using an appropriate TV coaxial cable, and select the ATV

input to view analog TV broadcasts.

If you have cable TV, you can connect your cable TV decoder box to the TV

RF input socket using an appropriate TV coaxial cable, and select the ATV

input to view cable TV.

See "5. Connect the antenna cable" on page 5.

V32B_V37B_EN.book Page 12 Wednesday, January 23, 2008 10:55 AM

Introduction 13

English

Video source inputs

You can connect an external analog video device (like a VCR or TV game

console) to the TV’s Composite Video (AV) or S-Video input, and select the

AV2 (for Composite Video input) or AV2-S (for S-Video input) as the input

source respectively to view analog video. See "Connecting the Composite

Video input" on page 25 and "Connecting the S-Video input" on page 26.

If the video source device supports it, you could alternatively connect it using

the Component Video inputs and select AV1 as the input source for the best

possible analog video picture. See "Connecting the Component Video input"

on page 26.

Of the analog video signal types mentioned above, Component Video offers the

best quality.

Graphic source inputs

You can connect the D-Sub output of a PC to the TV’s PC D-Sub input. For

better picture quality, you can alternatively connect the DVI output (if

available) of the PC to the TV’s HDMI/DVI input using a DVI to HDMI

adaptor cable. If your device supports HDMI output, you can also use the

HDMI input on the TV for connection.

Select the PC, DVI or HDMI input respectively to view the display. See

"Connecting the PC D-Sub input" on page 27, "Connecting the DVI input" on

page 27 and "Connecting the HDMI input" on page 28.

In order to fully utilize the high-definition capability of this TV, you should adjust

the output resolution of the source device (for example, DVD player or PC) to

closely match the native resolution of the TV. For example, 720p for Component/

HDMI video or 1360 x 768 pixels for PC video. For information on how to adjust

output resolution, please refer to the documentations of the device.

Front view

No. Name Description

1 Power indicator • Lights up green when the TV is powered on.

• Lights up red when the TV is in standby mode.

2Remote control

sensor window

Receives command signals from the remote control. Do

not obstruct the sensor by placing any objects in front of

it, which will hinder the reception of signals.

3 Speakers Left and right speakers for reproducing stereo audio.

1

2

3

V32B_V37B_EN.book Page 13 Wednesday, January 23, 2008 10:55 AM

Introduction14

English

Control panel (right side view)

No. Name Description

1(Power/

standby) button

Toggles the TV between standby mode and on. (Performs the

same action as the Power/standby button on the remote

control.) See "Power on, off and standby" on page 20.

2 MENU button

Displays the On-Screen Display (OSD) menu if not visible,

or exits the current menu if displayed. (Performs the same

action as the MENU button on the remote control.) See

"Navigating the OSD menu" on page 31.

3 (Volume) /

 button

• Adjusts the volume level of the built-in speakers. (Performs

the same action as the (Volume) +/- buttons on the

remote control.) See "Adjusting volume" on page 21.

• In the OSD menu, moves the selection highlight left or right

or changes settings. See "Navigating the OSD menu" on

page 31.

4 (Program)

/button

• Sequentially selects the previous or next tuned TV program.

(Performs the same action as the P/ buttons on

the remote control.) See "Changing programs" on page 21.

• In the OSD menu, moves the selection highlight up or down

or changes settings. See "Navigating the OSD menu" on

page 31.

5 INPUT button

• Cycles through possible input signal sources. (Performs the

same action as the INPUT button on the remote

control.) See "Selecting an input source" on page 20.

• In the OSD menu, selects the highlighted menu item or

enters a submenu (if available). See "Navigating the OSD

menu" on page 31.

1

2

3

4

5

V32B_V37B_EN.book Page 14 Wednesday, January 23, 2008 10:55 AM

Introduction 15

English

External AV devices terminal panel (left side view)

No. Name Description

1

AV2 (Composite

Video (AV) or S-

Video)

• VIDEO: Connect to the Composite Video (AV) output as

appropriate for your AV source device. See "Connecting

the Composite Video input" on page 25.

• S-VIDEO: Connect to the S-Video output as appropriate

for your AV source device. See "Connecting the S-Video

input" on page 26.

• AUDIO L/R: Connect to the audio output of either the

Composite Video or S-Video output as appropriate for

your AV source device. See "Connecting the Composite

Video input" on page 25 and "Connecting the S-Video

input" on page 26.

Connect your external AV device using either the

Composite Video or S-Video inputs. If both are connected

to an AV source at the same time, S-Video input takes

preference over Composite Video input. S-Video will

provide a better quality image.

2 Headset socket

An audio output for connecting an external headset. The

TV’s speakers will be muted whenever the headset socket is

being used. See "Connecting the headset audio output" on

page 29.

3

PC D-SUB Connect to the video (D-Sub) output of a PC. See

"Connecting the PC D-Sub input" on page 27.

PC AUDIO IN

Connect to the audio output to match that of the video

output on a PC. See "Connecting the PC D-Sub input" on

page 27.

4TV RF Connect to your antenna TV/CATV cable system. See "5.

Connect the antenna cable" on page 5.

1

2

3

4

V32B_V37B_EN.book Page 15 Wednesday, January 23, 2008 10:55 AM

Introduction16

English

Rear view

No. Name Description

1 HDMI/DVI

Connect to the HDMI digital audio/video or DVI digital

video output of your digital source device. See

"Connecting the HDMI input" on page 28 and

"Connecting the DVI input" on page 27.

2

AV1 Y CB/PB CR/PR

Connect to the Component Video (Y CB/PB CR/PR)

output of an appropriate video source device. See

"Connecting the Component Video input" on page 26.

AV1 L/R

Connect to the audio output of an appropriate video

source device to match that of the Component Video

input. See "Connecting the Component Video input" on

page 26.

3AUDIO OUTPUT L/

R

Connect to the audio input of an audio amplifier or

sub-woofer. This output is always available, however, its

level is fixed and cannot be controlled by the Volume.

See "Connecting the stereo audio output" on page 28.

4DVI-AUDIO INPUT

L/R

Connect to the DVI audio output of your digital source

device. See "Connecting the DVI input" on page 27.

5AC-INLET For connecting the AC power cable. See "6. Connect the

power cord" on page 5.

VB3233

2

3

4

5

1

VB3733

2

3

4

5

1

V32B_V37B_EN.book Page 16 Wednesday, January 23, 2008 10:55 AM

Page is loading ...

BenQ VB3733 Quick start guide

This manual is also suitable for

BenQ VB3733 Quick start guide

Other documents