American Standard 7052207.278 Installation guide

American Standard
Brand
American Standard
Model
7052207.278
Category
Sanitary ware
Type
Installation guide

This manual is also suitable for

American Standard 7052207.278 is a Delancey® Centerset Lavatory Faucet, featuring a durable construction and a stylish design. It is easy to install, with a single-hole mount design and flexible supply lines for quick and easy connections. The faucet has a water-saving aerator to reduce water consumption, and a pop-up drain for convenient use. It is also ADA-compliant for accessible use. With its combination of functionality, style, and ease of use, the American Standard 7052207.278 is an excellent choice for any bathroom.

American Standard 7052207.278 is a Delancey® Centerset Lavatory Faucet, featuring a durable construction and a stylish design. It is easy to install, with a single-hole mount design and flexible supply lines for quick and easy connections. The faucet has a water-saving aerator to reduce water consumption, and a pop-up drain for convenient use. It is also ADA-compliant for accessible use. With its combination of functionality, style, and ease of use, the American Standard 7052207.278 is an excellent choice for any bathroom.

- 1 -
Product names listed herein are trademarks of AS America, Inc.
© AS America, Inc. 2019
Thank you for selecting American Standard...
the benchmark of fine quality for over 140 years.
To ensure that your installation proceeds smoothly-please read
these instructions carefully before you begin.
RECOMMENDED TOOLS
1
INSTALL FAUCET
Delancey
®
Centerset Lavatory Faucet
INSTALLATION
INSTRUCTIONS
7052207
7052214
Certied to comply with ANSI A112.18.1M
CAUTION
Turn off hot and cold water
supplies before begining.
M965986 1.0 (5/19)
• Apply a bead of PUTTY along the edge of the
underside of the BODY. Insert FAUCET (1)
through mounting holes of Sink or mounting
surface. Fig. A.
• Assemble LOCKNUTS (2) onto SHANKS (3) from
under side of Sink. Hand tighten rmly. Fig. B.
Adjustable Wrench Screwdriver Channel Locks
Tubing Cutter
2
3
(HAND TIGHTEN)
Fig. B.
SINK OR
MOUNTING
SURFACE
PUTTY
3
2
Fig. A.
1
HOT LINE FOR HELP
For toll-free information and answers to your questions, call:
1 (800) 442-1902
Mon. - Fri. 8:00 a.m. to 8:00 p.m. EST
Saturday 10:00 a.m. to 4:00 p.m. EST
IN CANADA 1-800-387-0369
(TORONTO 1-905-306-1093)
Weekdays 8:00 a.m. to 7:00 p.m. EST
IN MEXICO 01-800-839-1200
- 2 -
M965986 1.0 (5/19)
4 5
6
FLANGE GASKET AND POP-UP KNOB CHECK OPERATION OF POP-UP
• Check DRAIN FLANGE in SINK to ensure that
FOAM GASKET is fully compressed and not visible.
FOAM
GASKET
NOT VISIBLE
DRAIN
FLANGE
2 3
INSTALL DRAIN FROM BELOW FIXTURE
• Install DRAIN (1) by dropping it from the top of the sink.
• From under side of SINK install GASKET (2) and
MOUNTING NUT (3).
Note: Plumber’s putty or caulk is recommended.
• Thread TAIL PIECE NUT (1) clockwise onto
DRAIN BODY (2).
1
2
3
DRAIN
OUTLET
REAR OF SINK
1
2
1
• Operate DRAIN STOPPER (1) to verify that it opens
and closes.
MAKE WATER SUPPLY AND WASTE CONNECTIONS
NOTE: FLEXIBLE SUPPLIES OR BULL-NOSE RISERS MUST BE
PURCHASED SEPARATELY.
• Connect water supply to FAUCET (1) with 1/2" IPS FLEXIBLE
SUPPLIES (2) or 3/8" O.D. BULL-NOSE RISERS (3).
• Use adjustable wrench to tighten connections. Do not over
tighten. Be careful not to kink copper supply when bending.
Use tubing cutter to cut to proper length.
• Connect 1-1/4" O.D. tailpiece on POP-UP DRAIN to
waste outlet.
COMPRESSION
NUT
3/8” COMPRESSION
CONNECTION
COUPLING
NUT
FLEXIBLE
SUPPLIES
3/8 O.D.
BULL-NOSE
RISERS
1/2" PIPE
THREAD
FERRULE
1
2
3
HOT COLD
- 3 -
8
9
• With HANDLES (1) in OFF position, turn on WATER
SUPPLIES (2) and check all connections for leaks.
• Remove AERATOR (3).
• Operate both HANDLES (1) to ush water lines thoroughly.
• Replace AERATOR (3).
CHECK DRAIN CONNECTIONS
• Fill lavatory with water. Check that DRAIN STOPPER (4)
makes a good seal and retains water in SINK.
• Check all drain connections and “P” trap for leaks.
Tighten if necessary.
CARE INSTRUCTIONS:
TEST INSTALLED FITTING
7
M965986 1.0 (5/19)
DO: SIMPLY RINSE THE PRODUCT CLEAN WITH CLEAR WATER. DRY WITH A SOFT COTTON FLANNEL CLOTH.
DO NOT: DO NOT CLEAN THE PRODUCT WITH SOAPS, ACID, POLISH, ABRASIVES, HARSH CLEANERS, OR A
CLOTH WITH A COARSE SURFACE.
• Operate DRAIN STOPPER (1) to verify that it opens
and closes.
SERVICE
CAUTION
Turn off hot and cold water
supplies before begining.
2
1
1
2
“P” TRAP
WASTE
OUTLET
3
4
1
2
If Faucet Drips, Proceed As Follows:
• Turn HANDLES (1) to OFF position.
• If spout drips, operate HANDLES (1) several times from OFF
to ON position. Do not force HANDLES they turn only 90˚.
• AERATOR (2) may accumulate dirt causing distorted and
reduced water ow. Remove AERATOR 2) and clean
before reinstalling.
  • Page 1 1
  • Page 2 2
  • Page 3 3

American Standard 7052207.278 Installation guide

American Standard
Brand
American Standard
Model
7052207.278
Category
Sanitary ware
Type
Installation guide
This manual is also suitable for

American Standard 7052207.278 is a Delancey® Centerset Lavatory Faucet, featuring a durable construction and a stylish design. It is easy to install, with a single-hole mount design and flexible supply lines for quick and easy connections. The faucet has a water-saving aerator to reduce water consumption, and a pop-up drain for convenient use. It is also ADA-compliant for accessible use. With its combination of functionality, style, and ease of use, the American Standard 7052207.278 is an excellent choice for any bathroom.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents