iiyama ProLite T2253MTS-B1 User manual

ProLite T2253MTS-B1
iiyama
Brand
iiyama
Model
ProLite T2253MTS-B1
Category
TVs & monitors
Type
User manual

The iiyama ProLite T2253MTS-B1 is a high-quality LCD monitor designed for professional use. With its 22-inch screen and Full HD resolution, it provides crisp and detailed images. The monitor also features a wide range of connectivity options, including HDMI, DisplayPort, and DVI, making it easy to connect to a variety of devices. Additionally, the ProLite T2253MTS-B1 has a built-in USB hub with two ports, allowing you to easily connect peripherals such as keyboards and mice.

The iiyama ProLite T2253MTS-B1 is a high-quality LCD monitor designed for professional use. With its 22-inch screen and Full HD resolution, it provides crisp and detailed images. The monitor also features a wide range of connectivity options, including HDMI, DisplayPort, and DVI, making it easy to connect to a variety of devices. Additionally, the ProLite T2253MTS-B1 has a built-in USB hub with two ports, allowing you to easily connect peripherals such as keyboards and mice.

ENGLISH
USER MANUAL
Thank you very much for choosing the
iiyama LCD monitor.
We recommend that you take a few
minutes to read carefully through
this brief but comprehensive manual
before installing and switching on the
monitor. Please keep this manual in a
safe place for your future reference.
ENGLISH
CE MARKING DECLARATION OF CONFORMITY
This LCD monitor complies with the requirements of the EC/EU Directive 2014/30/EU “EMC
Directive”, 2014/35/EU “Low Voltage Directive”, 2009/125/EC “ErP Directive” and 2011/65/EU
“RoHS Directive”.
The electro-magnetic susceptibility has been chosen at a level that gives correct operation in
residential areas, business and light industrial premises and small-scale enterprises, inside as
well as outside of the buildings. All places of operation are characterised by their connection to
the public low voltage power supply system.
IIYAMA CORPORATION: Wijkermeerstraat 8, 2131 HA Hoofddorp, The Netherlands
Model No. : PL2253MT
Wereservetherighttochangespecicationswithoutnotice.
All trademarks used in this user manual are the property of their respective owners.
We recommend recycling of used product. Please contact your dealer or iiyama
service center. Recycle information is obtained via the Internet, using the address:
http://www.iiyama.com
YoucanaccesstheWebpageofdierentcountriesfromthere.
ENGLISH
TABLE OF CONTENTS
FOR YOUR SAFETY ............................................................................ 1
SAFETY PRECAUTIONS................................................................1
SPECIAL NOTES ON LCD MONITORS .........................................3
CUSTOMER SERVICE ...................................................................3
CLEANING ......................................................................................3
CLEANING OF REFLECTOR .........................................................4
BEFORE YOU OPERATE THE MONITOR ..........................................5
FEATURES......................................................................................5
CHECKING THE CONTENTS OF THE PACKAGE ........................5
INSTALLATION ...............................................................................6
FITTING AND REMOVAL OF BASE ...............................................7
CONTROLS AND CONNECTORS..................................................8
CONNECTING YOUR MONITOR ..................................................9
COMPUTER SETTING .................................................................10
ADJUSTING THE VIEWING ANGLE ............................................10
OPERATING THE MONITOR .............................................................11
ADJUSTMENT MENU CONTENTS ..............................................12
SCREEN ADJUSTMENTS ............................................................22
POWER MANAGEMENT FEATURE .............................................25
TROUBLE SHOOTING ......................................................................26
RECYCLING INFORMATION .............................................................27
APPENDIX ........................................................................................28
SPECIFICATIONS ......................................................................... 28
DIMENSIONS ................................................................................ 29
COMPLIANT TIMING ....................................................................29
ENGLISH
FOR YOUR SAFETY 1
FOR YOUR SAFETY
WARNING
STOP OPERATING THE MONITOR IF YOU ARE AWARE OF ANY PROBLEMS
If you notice any abnormal phenomena such as smoke, strange sounds or fumes, unplug the
monitor and contact your dealer or iiyama service center immediately. Further use may be
dangerousandcancausereorelectricshock.
NEVER REMOVE THE CABINET
High voltage circuits are inside the monitor. Removing the cabinet may expose you to the danger of
reorelectricshock.
DO NOT PUT ANY OBJECT INTO THE MONITOR
Do not put any solid objects or liquids such as water into the monitor. In case of an accident, unplug
your monitor immediately and contact your dealer or iiyama service center. Using the monitor with
anyobjectinsidemaycausere,electricshockordamage.
INSTALL THE MONITOR ON A FLAT, STABLE SURFACE
The monitor may cause an injury if it falls or is dropped.
DO NOT USE THE MONITOR NEAR WATER
Donotusewherewatermaybesplashedorspiltontothemonitorasitmaycausereorelectric
shock.
OPERATE UNDER THE SPECIFIED POWER SUPPLY
Besuretooperatethemonitoronlywiththespeciedpowersupply.Useofanincorrectvoltagewill
causemalfunctionandmaycausereorelectricshock.
PROTECT THE CABLES
Do not pull or bend the power cable and signal cable. Do not place the monitor or any other heavy
objectsonthecables.Ifdamaged,thecablesmaycausereorelectricshock.
ADVERSE WEATHER CONDITIONS
It is advisable not to operate the monitor during a heavy thunder storm as the continual breaks in
power may cause malfunction. It is also advised not to touch the plug in these circumstances as it
may cause electric shock.
SAFETY PRECAUTIONS
ENGLISH
2 FOR YOUR SAFETY
CAUTION
INSTALLATION LOCATION
Do not install the monitor where sudden temperature changes may occur, or in humid, dusty or
smokyareasasitmaycausere,electricshockordamage.Youshouldalsoavoidareaswherethe
sun shines directly on the monitor.
DO NOT PLACE THE MONITOR IN A HAZARDOUS POSITION
The monitor may topple and cause injury if not suitably located. Please also ensure that you do not
place any heavy objects on the monitor, and that all cables are routed such that children may not
pull the cables and possibly cause injury.
MAINTAIN GOOD VENTILATION
Ventilation slots are provided to keep the monitor from overheating. Covering the slots may cause
re.Toallowadequateaircirculation,placethemonitoratleast10cm(or4inches)fromanywalls.
When removing the tilt stand, the ventilation slots on the back side of the monitor can be blocked.
This may overheat the monitor and may cause fire or damage. Make sure to allow enough
ventilation when removing the tilt stand. Operating the monitor on its back, side, upside down or on
a carpet or any other soft material may also cause damage.
DISCONNECT THE CABLES WHEN YOU MOVE THE MONITOR
Whenyoumovethemonitor,turnothepowerswitch,unplugthemonitorandbesurethesignal
cableisdisconnected.Ifyoudonotdisconnectthem,itmaycausereorelectricshock.
UNPLUG THE MONITOR
If the monitor is not in use for a long period of time it is recommended that it is left unplugged to
avoid accidents.
HOLD THE PLUG WHEN DISCONNECTING
To disconnect the power cable or signal cable, always pull it by the plug. Never pull on the cable
itselfasthismaycausereorelectricshock.
DO NOT TOUCH THE PLUG WITH WET HANDS
Pulling or inserting the plug with wet hands may cause electric shock.
WHEN YOU INSTALL THE MONITOR ON YOUR COMPUTER
Be sure the computer is strong enough to hold the weight of the monitor, otherwise, you may
damage your computer.
REMARK FOR 24/7 USAGE
Thisproductisnotspecicallydesignedfor24/7usageinallenvironments.
OTHERS
ERGONOMIC RECOMMENDATIONS
To eliminate eye fatigue, do not operate the monitor against a bright background or in a dark room.
Foroptimalviewingcomfort,themonitorshouldbejustbeloweyeleveland40-60cm(16-24inches)
away from your eyes. When using the monitor over a prolonged time, a ten minute break every hour
is recommended as looking at the screen continuously can cause eye strain.
ENGLISH
FOR YOUR SAFETY 3
The following symptoms are normal with LCD monitors and do not indicate a problem.
NOTE

When you first turn on the LCD monitor, the picture may not fit in the display area
because of the type of computer that is used. In this case, adjust the picture position to
the correct position.

Youmayndslightlyunevenbrightnessonthescreendependingonthedesktoppattern
you use.

Due to the nature of the LCD screen, an afterimage of the previous screen may remain
after switching the image, when the same image is displayed for hours. In this case, the
screencanberecoveredslowlybychangingtheimageorturningothePowerSwitch
for some hours.
SPECIAL NOTES ON LCD MONITORS

If you have to return your unit for service and the original packaging has been
discarded, please contact your dealer or iiyama service center for advice or replacement
packaging.
WARNING

If you drop any materials or liquids such as water into the monitor when cleaning,
unplug the power cable immediately and contact your dealer or iiyama service center.
CAUTION

Forsafety reasons, turno the powerswitch and unplugthe monitor beforeyou
clean it.

To protect the LCD panel, do not scratch or rub the screen with a hard object.

Never use any of the following strong solvents. These will damage the cabinet and
the LCD screen.

Touching the cabinet with any product made from rubber or plastic for a long time
may cause degeneration or loss of paint on the cabinet.
Thinner
Benzine
Abrasive cleaner
Spray-type cleaner
Wax
Acid or Alkaline solvent
CABINET
Stains can be removed with a cloth lightly moistened with a mild detergent solvent.
Then wipe the cabinet with a soft dry cloth.
LCD
SCREEN
Periodic cleaning with a soft dry cloth is recommended.
Don't use tissue paper etc. because these will damage the LCD screen.
CUSTOMER SERVICE
CLEANING
NOTE
NOTE
ENGLISH
4 FOR YOUR SAFETY

Never use any solvents, cleaners and sprays etc.., these will damage the reflector.
Whenthereector is damaged,the touchfunctioncan be lost. The cabinetor glass
can be cleaned with a mild detergent solvent but make sure it does not adhere to the
reector.

Never use a hard materials, hard clothes and tissue paper etc. because will damage the
reector.Whenthereectorisdamaged,thetouchfunctionislost.
Wipe the Stain gently with a soft cloth lightly moistened in water.
Then wipe it gently with a soft dry cloth.
Wipe the Dust gently with a soft dry cloth.
Use an Air Gun or Air Spray if available.
CLEANING OF REFLECTOR
NOTE
Dust:
Stain:
Optical Camera Module(inner)
Glass
Reflector(inner)
Front Cabinet
ENGLISH
BEFORE YOU OPERATE THE MONITOR 5
The following accessories are included in your package. Check to see if they are enclosed with
the monitor. If anything is missing or damaged, please contact your local iiyama dealer or regional
iiyamaoce.
BEFORE YOU OPERATE THE MONITOR
CHECKING THE CONTENTS OF THE PACKAGE
FEATURES
Supports Resolutions up to 1920 × 1080
High Contrast 1000:1 (Typical), Adv. Contrast Function Available / Brightness
220cd/m
2
(Typical with touch panel) / Quick Response Time 2ms (Gray to Gray)
Blue Light Reducer
Digital Character Smoothing
Automatic Set-up
Stereo Speakers
2 × 2.0W Stereo Speakers

Plug & Play VESA DDC2B Compliant
Windows
®
7/8.1/10 Compliant
Power Management (VESA DPMS Compliant)
VESA Mounting Standard (100mm×100mm) Compliant
Keyhole for Security Lock
*
The rating of the Power Cable enclosed in 120V area is 10A/125V. If you are using
a power supply higher than this rating, then a power cable with a rating of 10A/250V
must be used. However, all guarantees and warranties are void for any
problems or damage caused by a power cable not supplied by iiyama.
An approved power cable greater or equal to H05VVF, 3G, 0.75mm
2
must be
used.

Power Cable*

HDMI Cable

USB Cable

Stand-Base

Screwforstandxing(4pcs)

Safety Guide

Quick Start Guide

CAUTION
ENGLISH
6 BEFORE YOU OPERATE THE MONITOR

When you use with the wall mounting, in consideration of thickness of the mounting
stage,tightentheM4Screws(4pcs)withwasherwhich“L”lengthis8mmtofasten
the monitor. Using the screw longer than this may cause electric shock or damage
because it may contact with the electrical parts inside the monitor.
WARNING
Screw
Chassis
Mounting Stage
INSTALLATION
< WALL MOUNTING >
WARNING

Before installation, make sure the wall, ceiling or desktop arm is strong enough to
hold the necessary weight of the monitor and the mount.
< ROTATING THE MONITOR >
It is designed to be compatible in landscape mode.
Landscape
A
Available
Power Indicator
Portrait
A
A
Not Available
A
Power Indicator
Power Indicator
ENGLISH
BEFORE YOU OPERATE THE MONITOR 7

Put the monitor on a stable surface. The monitor may cause injury or damage if it
falls or is dropped.

Do not give a strong impact to the monitor. It may cause damage.

Unplug the monitor before removal or installation to avoid an electric shock or
a
damage.
CAUTION
FITTING AND REMOVAL OF BASE
<Installation>
Put a piece of soft cloth on the table beforehand to prevent the monitor from being scratched.
Laythemonitoratonatablewithfrontfacedown.
Hold the monitor and push the Stand-Base.
Use the ‘thumb screw’ provided to secure the base to the monitor column.
<Removal>
Put a piece of soft cloth on the table beforehand to prevent the monitor from being scratched.
Laythemonitoratonatablewithfrontfacedown.
Remove the ‘thumb screw’ to remove the base from the monitor column.
ThumbscrewforStand-Basexing
Stand-Base
ENGLISH
8 BEFORE YOU OPERATE THE MONITOR
CONTROLS AND CONNECTORS
Power Indicator
Blue: Normal operation
Orange: Power Management
PowerSwitch( )
Menu/EnterButton(MENU/ENTER)*
Scrollup/AudioAdjustButton( / )*
Scrolldown/ECOButton( / )*
Input/ExitButton(INPUT/EXIT)*
Speakers
HeadphoneConnector(HEADPHONE)
AudioConnector(AUDIOIN)
VGAConnector(VGA)
DVI-DConnector(DVI)
HDMIConnector(HDMI)
ACConnector( :Alternatingcurrent)(ACPOWERIN)
USBUpstreamConnector( )
USBDownstreamConnector( 5V,500mA)
Keyhole for Security Lock
You can fasten a security lock and cable to prevent the monitor from being removed
without your permission.
* You can skip the Menu items and display an adjustment scale directly.
<Front> <Back>
NOTE
NOTE
ENGLISH
BEFORE YOU OPERATE THE MONITOR 9
CONNECTING YOUR MONITOR
Ensurethatboththecomputerandthemonitorareswitchedo.
Connect the computer to the monitor with the signal cable.
Connect the computer to the monitor with the USB Cable.
Connect the monitor to the audio equipment with the Audio Cable for computer when using the
audio features.
ConnectthePowerCabletothemonitorrstandthentothepowersupply.
Turn on your monitor and computer.
[Example of Connection]
<Back>
NOTE
The signal cables used for connecting the computer and monitor may vary with the
type of computer used. An incorrect connection may cause serious damage to both
the monitor and the computer. The cable supplied with the monitor is for a standard
connector. If a special cable is required please contact your local iiyama dealer or
regionaliiyamaoce.
For connection to Macintosh computers, contact your local iiyama dealer or regional
iiyamaoceforasuitableadaptor.
Makesureyoutightenthengerscrewsateachendofthesignalcable.
The Class I pluggable equipment Type A must be connected to protective earth.
The socket-outlet shall be installed near the equipment and shall be easily accessible.
Excessive sound pressure from ear-/headphones can cause hearing damage/hearing loss.
[ Collect Cables ]
Remove the Cable Cover and pass the cables.
Put the cables through the cable hole of the back.
Place the Cable Cover.
Cable Hole
Cable Cover
Front
HDMI Cable (Accessory)
Power Cable
(Accessory)
Audio Cable (Not included)
Computer
VGA Cable (Not included)*
DVI-D Cable (Not included)*
AV Equipment etc.
Mouse Keyboard
USB Cable (Accessory)
* Cable is not supplied with the monitor. If you use low quality Cable, it may cause a result of electro-
magnetic interference. Please contact the iiyama Support Centre in your country if you wish to
connect the monitor via the VGA or DVI input.
ENGLISH
10 BEFORE YOU OPERATE THE MONITOR
Signal Timing
Change to the desired signal timing listed on page 22: COMPLIANT TIMING.
COMPUTER SETTING
ADJUSTING THE VIEWING ANGLE
For optimal viewing it is recommended to look at
the full face of the monitor.
Hold the stand so that the monitor does not
topple when you change the monitor’s angle.
You are able to adjust the monitor’s angle up to
73° upward, 3° downward.
In order to ensure a healthy and relaxed body
position when using the monitor at visual
display workstations, it is recommended that
the adjusted tilt angle should not exceed 10
degrees. Adjust the monitor’s angle to your own
preference.
Do not touch the LCD screen when
you change the angle. It may cause
damage or break the LCD screen.
Careful attention is required not to pinch
your fingers or hands into the moving
part of the stand when you change the
angle.
NOTE
3
73

TOUCH support operation system
Mouse Digitizer Gestures*
1
Windows8/8.1/10
Windows7
Windows
Vista
Windows XP
Mac OS/OS X
Linux
Android
Functions
Click
Drag
Double-Click
Mouse function
Right-Click
Flick
Visual feedback
Mouse & Digitizer functions
Press & Tap, Rotate, Zoom-in/out
The other OS Versions not listed are not supported.
: Supported : Not supported
*
1
Gestures can be supported by application programs.
ENGLISH
OPERATING THE MONITOR 11
OPERATING THE MONITOR
To create the best picture, your iiyama LCD monitor has been preset at the factory with the COMPLIANT
TIMING shown on page 29. You are also able to adjust the picture by following the button operation
shown below. For more detailed adjustments, see page 22 for SCREEN ADJUSTMENTS.

When button operations are aborted during adjustment, On-Screen Display disappears when the
timesetfortheOSDTimeouthaspassed.Also,presstheEXITbuttontoquicklyturnotheOn-
Screen Display.

Any changes are automatically saved in the memory when the On Screen Display
disappears.
TurningothepowershouldbeavoidedwhileusingtheMenu.

Adjustments for Horizontal / Vertical Position, Pixel Clock and Phase are saved for each signal
timing. Except for these adjustments, all other adjustments have only one setting which applies to
all signal timings.
NOTE
For example, to correct for vertical position, select Menu item of Geometry and then press the
ENTER Button. Then, select Vertical Position by using the
/ Buttons.
An adjustment page appears after you press the ENTER Button. Then, use the
/ Buttons
to change the vertical position settings. The vertical position of the overall display should be
changing accordingly while you are doing this.
Press the EXIT Button lastly, it ends, all changes are saved in the memory.
Press the MENU Button to start the On Screen Display feature. There are additional
Menu items which can be switched by using the
/ Buttons.
Select the Menu item which contains the adjustment icon relating to the adjustment
you want to make. Press the ENTER Button. Then, use the
/ Buttons to
highlight the desired adjustment icon.
Press the ENTER Button again. Use the / Buttons to make the appropriate
adjustment or setting.
Press the EXIT Button to leave the menu, and the settings you just made would be
automatically saved.
AUTO ADJUST
PICTURE ADJUST
GEOMETRY
COLOR SETTINGS
LANGUAGE
RECALL
MISCELLANEOUS
INPUT SELECT
AUDIO SETTINGS
ProLite T2253MTS
OSD
HORIZONTAL POSITION
GEOMETRY
VERTICAL POSITION
PIXEL CLOCK
PHASE
ENGLISH
12 OPERATING THE MONITOR
ADJUSTMENT MENU CONTENTS
Adjustment Item Problem / Option Button to Press
Auto Adjust
Auto Adjust *
Adjust H. / V. Position, Clock and Phase automatically.
ProLite T2253MTS
AUTO ADJUST
PICTURE ADJUST
GEOMETRY
COLOR SETTINGS
OSD
LANGUAGE
RECALL
MISCELLANEOUS
INPUT SELECT
AUDIO SETTINGS
CLICK ENTER AGAIN TO AUTO ADJUST
AUTO ADJUST
* Only Analog Input.
For best results, use the Auto Adjust in conjunction with the adjustment pattern. See page 22 for
SCREEN ADJUSTMENTS.
You can skip the Menu items and display an adjustment scale directly by using the following button
operations.
Auto Adjust: Pressing and holding of the INPUT/EXIT Button for 3 seconds when the Menu is not
displayed.
Direct
Direct
ENGLISH
OPERATING THE MONITOR 13
*
1
Picture Adjust is disabled when i-Style Color is activated.
*
2
Adjust the Brightness when you are using the monitor in a dark room and feel the screen is too
bright.
*
3
See page 21 for Disabled function matrix.
Adjustment Item Problem / Option Button to Press
Picture Adjust *
1
Too dark
Too bright
Brightness*
2,3
Contrast *
2,3
Too dull
Too intense
AUTO ADJUST
PICTURE ADJUST
GEOMETRY
COLOR SETTINGS
LANGUAGE
RECALL
MISCELLANEOUS
INPUT SELECT
AUDIO SETTINGS
ProLite T2253MTS
BRIGHTNESS
OSD
CONTRAST
ECO
BLUE LIGHT REDUCER
ADV. CONTRAST
OVERDRIVE
OFF
OFF
OFF
ON
OFF
GAMMA
1.8
X-RES TECHNOLOGY
OFF
ECO *
3
O Normal
Direct
Mode1 Brightness of back-light is reduced.
Brightness of back-light is reduced more than Mode1.
Mode3
Brightness of back-light is reduced more than Mode2.
Mode2
Blue Light Reducer *
3
O
Typical
Mode1
Blue light is reduced.
Mode2
Blue light is reduced more than Mode1.
Mode3
Blue light is reduced more than Mode2.
Adv. Contrast *
3
Increased Contrast Ratio
On
O
Typical Contrast Ratio
Overdrive
O/1/2/3
It will improve the gray level response time of the
LCD panel.
A higher level results in a faster response time.
You can skip the Menu items and display an adjustment scale directly by using the following button
operations.

ECO: Press the
/ Button when the Menu is not displayed.
Blue Light Reducer: Pressing and holding of the
/ Button for 3 seconds when the Menu is
not displayed.
Direct
Gamma
1.8 / 2.0 / 2.2 / 2.4
You can set the Gamma.
Enhance the picture edge.
O Normal
Soft
Enhance the picture edge more than the Middle option.Hard
X-Res Technology
Enhance the picture edge more than the Soft option.
Middle
Direct
ENGLISH
14 OPERATING THE MONITOR
Adjustment Item Problem / Option Button to Press
Geometry *
AUTO ADJUST
PICTURE ADJUST
GEOMETRY
COLOR SETTINGS
LANGUAGE
RECALL
MISCELLANEOUS
INPUT SELECT
AUDIO SETTINGS
ProLite T2253MTS
OSD
HORIZONTAL POSITION
GEOMETRY
VERTICAL POSITION
PIXEL CLOCK
PHASE
Phase
Pixel Clock
Too left
Too right
Too low
Too high
Horizontal Position
Vertical Position
Too narrow
Too wide
Tocorrectickeringtextorlines
* Only Analog Input.
See page 22 for SCREEN ADJUSTMENTS.
ENGLISH
OPERATING THE MONITOR 15
Hue *
1,2
Green
Blue
Red
Magenta
Yellow
Cyan
You can set the Colours.
AUTO ADJUST
PICTURE ADJUST
GEOMETRY
COLOR SETTINGS
LANGUAGE
RECALL
MISCELLANEOUS
INPUT SELECT
AUDIO SETTINGS
ProLite T2253MTS
OSD
COLOR TEMPERATURE
USER PRESET
9300K 7500K
6500K
RED
GREEN
BLUE
HUE
SATURATION
I-STYLE COLOR
RED
RED
OFF
Adjustment Item Problem / Option Button to Press
Color Settings *
1
*
1
See page 21 for Disabled function matrix.
*
2
Functions other than i-Style Color is disabled when i-Style Color is activated.
Too weak
Too strong
User Preset *
2
Bluish white
Red
Green
9300K
Reddish white
7500K
Greenish white
6500K
Blue
Color Temperature *
2
i-Style Color
Standard
For general windows environment and monitor
default setting.
Text
For text editing and viewing in a word processing
environment.
Game
For PC game environment.
Cinema
For movie and video environment.
Scenery For displaying outdoor scenery images
O
Return to a state set by color adjustment except
i-Style Color.
Saturation *
1,2
Green
Blue
Red
Magenta
Yellow
Cyan
You can set the Colours.
ENGLISH
16 OPERATING THE MONITOR
OSD Time
OSD Horizontal Position
OSD is too left
OSD is too right
OSD is too low
OSD is too high
You can set the OSD display duration time
between 5 and 30 seconds.
Adjustment Item Problem / Option Button to Press
OSD
OSD Vertical Position
AUTO ADJUST
PICTURE ADJUST
GEOMETRY
COLOR SETTINGS
LANGUAGE
RECALL
MISCELLANEOUS
INPUT SELECT
AUDIO SETTINGS
ProLite T2253MTS
OSD
ON SCREEN DISPLAY SETTINGS
OSD HORIZONTAL POSITION
OSD VERTICAL POSITION
OSD TIME
AFTER AC CUT
ON
OFF
ON
OFF
Monitorsstaysinomodewhenpowerisback.
To turn the monitor back on, press the
power switch.
On
O
When power is back, the monitor returns to the mode
it was in before AC loss.
After AC Cut
NOTE
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33

iiyama ProLite T2253MTS-B1 User manual

ProLite T2253MTS-B1
iiyama
Brand
iiyama
Model
ProLite T2253MTS-B1
Category
TVs & monitors
Type
User manual

The iiyama ProLite T2253MTS-B1 is a high-quality LCD monitor designed for professional use. With its 22-inch screen and Full HD resolution, it provides crisp and detailed images. The monitor also features a wide range of connectivity options, including HDMI, DisplayPort, and DVI, making it easy to connect to a variety of devices. Additionally, the ProLite T2253MTS-B1 has a built-in USB hub with two ports, allowing you to easily connect peripherals such as keyboards and mice.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents