Holman GH2002 User manual

Category
Motorcycle Accessories
Type
User manual

Holman GH2002 is a 2-meter deep greenhouse with a misting system, perfect for propagating plants from seed or cuttings. It features a sturdy frame, a protective cover, and a misting system that helps to create a humid environment for your plants. The greenhouse is easy to assemble and can be positioned in a sheltered spot in your garden. It comes with ground stakes and guy ropes to secure it to the ground, and it can hold up to 10kg on each shelf.

Holman GH2002 is a 2-meter deep greenhouse with a misting system, perfect for propagating plants from seed or cuttings. It features a sturdy frame, a protective cover, and a misting system that helps to create a humid environment for your plants. The greenhouse is easy to assemble and can be positioned in a sheltered spot in your garden. It comes with ground stakes and guy ropes to secure it to the ground, and it can hold up to 10kg on each shelf.

1 of 8
Greenhouse Kit
2m Depth
with Misting System
User Guide
2 of 8 3 of 8
Before you Start
Check the pack contents before attempting construction.
Location and Positioning
The seedlings in your greenhouse want an outdoor full-sun to part-sun position all year
round, depending on the climate of your location. Where possible, the greenhouse
should be positioned in a sheltered location protected from direct winds. Avoid very
windy positions and spots where the frame may stand in water for long periods.
Overview
Propagating from
Seed in a Greenhouse
#SMARTGARDENER Blog Post
Package Contents
10
×5
11
×12
12
×2
13
×3
14
×1
15
×6
16
×1
17
×1
A
×4
B
×12
C
×4
D
×6
E
×30
F
×2
G
×2
1
×3
2
×45
3
×40
4
×24
5
×8
6
×12
7
×12
8
×4
9
×1
Greenhouse Frame Misting System
www.holmanindustries.com.au/
propagating-from-seed-in-a-greenhouse/
4 of 8 5 of 8
Misting System Connection
Connect up the black poly pipe
using the
elbow
and joiners
to fit around the frame.
Trim the last piece of poly pipe as needed and
place the end cap
onto the top end of the
poly pipe and the snap-on connector
to
the bottom end as shown below. Attach your
garden hose to the snap-on connector.
Attach the poly pipe along the width of the top central
beam and adjoining vertical corner poles with clips
.
To insert the sprayers
, punch six holes along the top
length of poly pipe with the supplied punch
. Twist
the yellow end of the sprays into the punched holes.
Assembly (continued)
10
12
10
10
1010
14
13
13
15
12
11
11
16
11 11
11 11
11 11
11 11
to Garden Hose
11
11
17
11
13
16
Assembly
Assemble frame
as shown. Metal
tubes
①‑⑤
push into
plastic parts
Ⓐ‑Ⓖ
and shelves
sit on
the horizontal tubes.
Start with the base and
work upwards. Tools
are not requiredhand
assembly is suitable.
We suggest wearing
protective gloves
during assembly.
When assembled,
check the frame is
tightly pushed together
in all directions.
Before covering the
frame, use the frame
pegs
to fasten down
the assembled frame.
Frame Assembly
7
G
F
F
E
E
A
E
5
5
5
5
5
5
5
A
B
A
E
6
6
6
6
6
6
6
6
6
6
6
6
E
E
E
E
E
E
D
G
D
C
C
C
C
E
7
7
7
7
4
4
7
7
2
2
2
2
2
2
2
2
2
2
2
2
D
D
3
3
3
3
3
7
7
1
1
E
E
6 of 8 7 of 8
CAUTION
Ensure the greenhouse is secured to the ground with pegs or weights. Ensure weight is placed evenly on
shelves to avoid the possibility of the greenhouse tipping over. Ensure all poles and fittings are securely
assembled prior to use. The method of securing will depend on the ground surface. The greenhouse
should not be left out in windy conditions if it has not been secured to the ground. During extreme weather
conditions or high winds, ensure the greenhouse is moved to a sheltered area and ensure it is secured
to the ground using appropriate methods. The greenhouse should be disassembled when not in use.
Maximum loading: 10kg for each shelf.
Cleaning and Storage
Wash off heavy dirt or dust deposits and remove bird droppings with soapy water. The cover
may be removed from the whole structure, disassembled and stored when not in use.
Maintenance
Covering the Frame
Unzip the cover
door before fitting to the assembled
frame. Failure to do so may cause damage to the
cover. Secure the cover to the frame with the ties
attached to the inside of the cover. For ease of
access, the doorway can be rolled and tied up.
Assembly (continued)
9
8
8
8
Unzip before
covering!
TIE POINT
TIE POINT
TIE POINT
Fasten Down the Greenhouse
Ground stakes with guy ropes
are provided to secure the cover to the ground, along with pegs
for
securing the frame. Lower corner angle points on the cover can also be used for extra security.
We recommend two people for this
step to avoid damage to the cover
8 of 8
Thanks for being a
#SMARTGARDENER
We really appreciate having you as a customer, and would like to say thank you for choosing us.
We recommend registering your new product on our website. This will ensure we have
a copy of your purchase and activate an extended warranty. Keep up to date to with
relevant product information and special offers available through our newsletter.
www.holmanindustries.com.au/produc t-registration /
Thanks again for choosing Holman
Thanks for being a
#SMARTGARDENER
We really appreciate having you as a customer, and would like to say thank you for choosing us.
We recommend registering your new product on our website. This will ensure we have
a copy of your purchase and activate an extended warranty. Keep up to date to with
relevant product information and special offers available through our newsletter.
www.holmanindustries.com.au/produc t-registration /
Thanks again for choosing Holman
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5

Holman GH2002 User manual

Category
Motorcycle Accessories
Type
User manual

Holman GH2002 is a 2-meter deep greenhouse with a misting system, perfect for propagating plants from seed or cuttings. It features a sturdy frame, a protective cover, and a misting system that helps to create a humid environment for your plants. The greenhouse is easy to assemble and can be positioned in a sheltered spot in your garden. It comes with ground stakes and guy ropes to secure it to the ground, and it can hold up to 10kg on each shelf.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI