1. Place the gauge on under side of the down tube in front of cable guides.
2. Slide the gauge onto the tube with finger tips. Do not use strong force.
If the gauge fits flush against the downtube the frame was manufactured incorrectly and must be replaced.
If the gauge does not fit flush, the frame was manufactured correctly and does not require replacement.
Cannondale Gemini Frame Gauge - P/N 114904
CORRECT
This frame was manufactured correctly.
INCORRECT
This frame was manufactured incorrectly.
This frame MUST be replaced.
Call 1-800-BIKE-USA.
TOOL
CABLE
GUIDES
P/N 114903
1. Place the gauge on under side of the down tube in front of cable guides.
2. Slide the gauge onto the tube with finger tips. Do not use strong force.
If the gauge fits flush against the downtube the frame was manufactured incorrectly and must be replaced.
If the gauge does not fit flush, the frame was manufactured correctly and does not require replacement.
Cannondale Gemini Frame Gauge - P/N 114904
CORRECT
This frame was manufactured correctly.
INCORRECT
This frame was manufactured incorrectly.
This frame MUST be replaced.
Call 1-800-BIKE-USA.
TOOL
CABLE
GUIDES
P/N 114903
P/N 114903
P/N 114903
*
The
gauge
is
for
use
on
MEDIUM
and
LARGE
size
bike
frames
only
.
SMALL and X-LARGE bikes do not re
q
uire ins
p
ection
.
*
The
gauge
is
for
use
on
MEDIUM
and
LARGE
size
bike
frames
only
.
SMALL and X-LARGE bikes do not re
q
uire ins
p
ection
.
-
1
-
2
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
Cannondale Synapse Owner's manual
-
-
-
-
-
-
-
-
-