2. Danfoss
  3. NXC Air Cooled ED
NXC Air Cooled ED

Danfoss NXC Air Cooled ED Installation guide

  • Hello! I am an AI chatbot trained to assist you with the Danfoss NXC Air Cooled ED Installation guide. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
quick guide
advanced safety options
optbl, optbm, optbn
ac drives
vacon
®
nxp
PREFACE
DOCUMENT DETAILS
Document ID: DPD01919C
Date: 7.5.2019
ABOUT THIS MANUAL
This manual is copyright of VACON Ltd. All Rights Reserved. The manual is subject to change
without prior notice. The language of the original instructions is English.
REFERENCES
You can download the VACON
®
NXP Advanced Safety Options Operating Guide from the
Danfoss website http://drives.danfoss.com/knowledge-center/technical-documentation/. It is
necessary to read the Operating Guide to understand and design the safety system.
The VACON
®
Safe tool can be downloaded from http://drives.danfoss.com/services/pc-tools.
The Commissioning report can be printed from the VACON
®
Safe tool with prefilled data. The
Commissioning report can also be found as an appendix in the VACON
®
NXP Advanced Safety
Options Operating Guide.
PREFACE VACON · 3
LOCAL CONTACTS: HTTP://DRIVES.DANFOSS.COM/DANFOSS-DRIVES/LOCAL-CONTACTS/
VERSION HISTORY
Date Revision Updates
23.1.2017 A The first published version of this manual.
12.7.2018 B
•
Information on the manual added. Chapter About this manual.
•
Version history table added.
•
Table linking option board names to option board codes. Chapter 3.4
General information.
•
Images edited. Chapter 3 VACON® Advanced Safety Option variants.
•
Warning added. Chapter 4.1 Installation of the option board to
VACON® NXP AC drive.
•
Safety bypass procedure updated. Chapter 5.4 Safety bypass.
•
Configuration example added. Chapter 5.5 Emergency stop using the
STO function.
•
Other minor updates. Throughout the manual.
7.5.2019 C
•
NXP software information updated. Chapter 2.1 Requirements.
•
Example configuration updated. Chapter 2.3 Using the Advanced
safety option board.
•
Encoder terminal information updated. Chapters 3.2 Option board
OPTBM and 3.3 Option board OPTBN.
•
General information updated. Chapter 3.4 General information.
•
Option board installation instructions updated. Chapter 4.1 Installa-
tion of the option board to VACON® NXP AC drive.
VACON · 4 PREFACE
LOCAL CONTACTS: HTTP://DRIVES.DANFOSS.COM/DANFOSS-DRIVES/LOCAL-CONTACTS/
TABLE OF CONTENTS
Preface
Document details 3
About this manual 3
References 3
Version history 4
1 Approvals 6
1.1 The certificates of the VACON
®
Advanced Safety Options 6
1.2 The EC Declaration of Conformity 9
2 General information 10
2.1 Requirements 10
2.2 Safety levels of the Advanced safety option board 10
2.3 Using the Advanced safety option board 10
3 VACON® Advanced Safety Option variants 12
3.1 Option board OPTBL 12
3.2 Option board OPTBM 12
3.3 Option board OPTBN 13
3.4 General information 15
4 Installation 16
4.1 Installation of the option board to VACON
®
NXP AC drive 16
4.1.1 The installation procedure 16
5 Commissioning 18
5.1 Preparing for commissioning 18
5.2 Parameterisation process 19
5.3 First start-up after the installation of the option board 21
5.3.1 Doing the first start-up with the option board 21
5.4 Safety bypass 22
5.5 Emergency stop using the STO function 22
TABLE OF CONTENTS VACON · 5
LOCAL CONTACTS: HTTP://DRIVES.DANFOSS.COM/DANFOSS-DRIVES/LOCAL-CONTACTS/
1 APPROVALS
1.1 THE CERTIFICATES OF THE VACON
®
ADVANCED SAFETY OPTIONS
VACON · 6 APPROVALS
1
LOCAL CONTACTS: HTTP://DRIVES.DANFOSS.COM/DANFOSS-DRIVES/LOCAL-CONTACTS/
APPROVALS VACON · 7
LOCAL CONTACTS: HTTP://DRIVES.DANFOSS.COM/DANFOSS-DRIVES/LOCAL-CONTACTS/
1
VACON · 8 APPROVALS
1
LOCAL CONTACTS: HTTP://DRIVES.DANFOSS.COM/DANFOSS-DRIVES/LOCAL-CONTACTS/
1.2 THE EC DECLARATION OF CONFORMITY
APPROVALS VACON · 9
LOCAL CONTACTS: HTTP://DRIVES.DANFOSS.COM/DANFOSS-DRIVES/LOCAL-CONTACTS/
1
2 GENERAL INFORMATION
2.1 REQUIREMENTS
Table 1: Required drive component versions
Component Version Comment
The control board of NXP AC
drive
Hardware: VB00761 B or
newer
Software: NXP00002V198 or
newer
The STO and ATEX option
board (OPTAF)
Hardware: VB00328 E or
newer
See the product manual for safety levels of
STO.
Table 2: The PC tools that can be used with the option board
PC tool Version Comment
NCDrive 2.0.29 or newer You can use older versions than this, but they
do not show correctly the details of safety
related faults.
VACON
®
Loader 1.1.12.0 or newer The tool is used to update the option board
firmware.
VACON
®
Safe 1.0.2.0 or newer The tool is used to parameterise and monitor
the option board.
2.2 SAFETY LEVELS OF THE ADVANCED SAFETY OPTION BOARD
•
Safety integrity level (SIL): SIL 3
•
Performance level (PL): PL e
•
Category (Cat): Cat 4
2.3 USING THE ADVANCED SAFETY OPTION BOARD
The Advanced safety option board is used to implement safety functions in accordance with
the standard EN IEC-61800-5-2. The option board handles the safe I/O and the monitoring of
active safety functions. The option board does not handle the control of the AC drive. The AC
drive can be controlled, for example, with the drive application, or the external process
control system can give the speed reference to the AC drive.
The Advanced safety option board must be used with a subsystem that provides the STO
function, it is not possible to use the Advanced safety option board alone. The STO function is
provided, for example, by the OPTAF STO option board. To use the safety functions that do
speed monitoring, an external speed sensor is necessary. The sensor can be a digital or an
analogue encoder or a digital proximity sensor.
When you use a safe fieldbus, you must install an option board that supports the fieldbus.
VACON · 10 GENERAL INFORMATION
2
LOCAL CONTACTS: HTTP://DRIVES.DANFOSS.COM/DANFOSS-DRIVES/LOCAL-CONTACTS/
The Fig. 1 below shows the configuration of the AC drive with the Advanced safety option
board in slot C. The safe fieldbus and the closed-loop control are optional. The possible
configuration and available features may depend on other option boards and their installation
slots.
VACON
®
Loader
SLOT A
Basic I/O
Encoder
Safety PLC or other safety systems
Motor
Power
Unit
STO
option
board
STO
Encoder
signals
Digital
I/O
Safe
fieldbus
Advanced
safety
option
board
Fieldbus
board
SLOT B SLOT C SLOT D SLOT E
NCDrive VACON
®
Safe
PC
Drive
Control Board
Fig. 1: An example configuration of the NXP drive with the Advanced safety option board. The sub-
systems that handle safety actions are marked in grey.
The parameterisation of the option board is done by selecting and editing the safety functions
and features with the VACON
®
Safe tool.
GENERAL INFORMATION VACON · 11
LOCAL CONTACTS: HTTP://DRIVES.DANFOSS.COM/DANFOSS-DRIVES/LOCAL-CONTACTS/
2
3 VACON® ADVANCED SAFETY OPTION VARIANTS
3.1 OPTION BOARD OPTBL
1 3 5 7 9
2 4 6 8
11 13 15 17
12
14 16 1810
A B
Fig. 2: The terminals of the OPTBL option board
A. Terminals X3
B. Terminals X4
1. STO 1. STO terminal 1 +24 V. 11. Din 1A. Terminal A of digital input 1.
2. STO 2. STO terminal 2 +24 V. 12. Din 1B. Terminal B of digital input 1.
3. GND. 13. Din 2A. Terminal A of digital input 2.
4. GND. 14. Din 2B. Terminal B of digital input 2.
5. Dout 1A. Terminal A of digital output 1. 15. Din 3A. Terminal A of digital input 3.
6. Dout 1B. Terminal B of digital output 1. 16. Din 3B. Terminal B of digital input 3.
7. Dout 2A. Terminal A of digital output 2. 17. Din 4A. Terminal A of digital input 4.
8. Dout 2B. Terminal B of digital output 2. 18. Din 4B. Terminal B of digital input 4.
9. +24 V. +24 V supply for external logic.
10. GND.
3.2 OPTION BOARD OPTBM
The OPTBM option board is similar to the OPTBL option board, but in addition, the OPTBM
option board has a digital pulse TTL/HTL type encoder interface board attached to it.
VACON · 12 VACON® ADVANCED SAFETY OPTION VARIANTS
3
LOCAL CONTACTS: HTTP://DRIVES.DANFOSS.COM/DANFOSS-DRIVES/LOCAL-CONTACTS/
1
C D
2 3 4 5 6 9 10 11 12 13 147 8
A B
Fig. 3: The terminals of the digital pulse type encoder interface board
C. Encoder input terminals X5
D. Encoder output terminals X6
1. Encoder voltage. Configurable encoder
voltage.
9. A+. Unmodified encoder signal loop-back.
2. GND. 10. A-. Unmodified encoder signal loop-back.
3. A+. Terminal A of digital pulse signal. 11. B+. Unmodified encoder signal loop-
back.
4. A-. Terminal A of digital pulse signal. 12. B-. Unmodified encoder signal loop-
back.
5. B+. Terminal B of digital pulse signal. 13. Z+. Unmodified encoder signal loop-back.
6. B-. Terminal B of digital pulse signal. 14. Z-. Unmodified encoder signal loop-back.
7. Z+. Reference signal, optional. B. Terminals X4 (See Fig. 2.)
8. Z-. Reference signal, optional.
A. Terminals X3 (See Fig. 2.)
3.3 OPTION BOARD OPTBN
The OPTBN option board is similar to the OPTBL option board, but in addition, the OPTBN
option board has a Sin/Cos type encoder interface board attached to it.
VACON® ADVANCED SAFETY OPTION VARIANTS VACON · 13
LOCAL CONTACTS: HTTP://DRIVES.DANFOSS.COM/DANFOSS-DRIVES/LOCAL-CONTACTS/
3
1
C D
2 3 4 5 6 9 10 11 12 13 147 8
A B
Fig. 4: The terminals of the Sin/Cos type encoder interface board
C. Encoder input terminals X7
D. Encoder output terminals X8
1. Encoder voltage. Selectable encoder
voltage.
9. Sin+. Unmodified encoder signal loop-
back.
2. GND. 10. Sin-. Unmodified encoder signal loop-
back.
3. Sin+. Sinus terminal of analogue pulse
signal.
11. Cos+. Unmodified encoder signal loop-
back.
4. Sin-. Sinus terminal of analogue pulse
signal.
12. Cos-. Unmodified encoder signal loop-
back.
5. Cos+. Cosine terminal of analogue pulse
signal.
13. Z+. Unmodified encoder signal loop-back.
6. Cos-. Cosine terminal of analogue pulse
signal.
14. Z-. Unmodified encoder signal loop-back.
7. Z+. Reference signal, optional. B. Terminals X4 (See Fig. 2.)
8. Z-. Reference signal, optional.
A. Terminals X3 (See Fig. 2.)
VACON · 14 VACON® ADVANCED SAFETY OPTION VARIANTS
3
LOCAL CONTACTS: HTTP://DRIVES.DANFOSS.COM/DANFOSS-DRIVES/LOCAL-CONTACTS/
3.4 GENERAL INFORMATION
Newer versions of the Advanced Safety Option have extended slot compatibility. The table
below describes the supported slots for different revisions of the option board. The
compatibility is determined by the revision of the board 70CVB01938. See Fig. 5 for the
location of the revision information.
Option board revision
(70CVB01938)
Slot C Slot D Slot E
C, E - Yes -
F Yes Yes Yes
Fig. 5: The board identification sticker on the Advanced safety option board
VACON® ADVANCED SAFETY OPTION VARIANTS VACON · 15
LOCAL CONTACTS: HTTP://DRIVES.DANFOSS.COM/DANFOSS-DRIVES/LOCAL-CONTACTS/
3
4 INSTALLATION
4.1 INSTALLATION OF THE OPTION BOARD TO VACON
®
NXP AC DRIVE
CAUTION!
Do not install, remove, or replace option boards on the drive when the power is on.
Doing this can cause damage to the boards.
WARNING!
Do not touch the control terminals. They can have a dangerous voltage also when
the drive is disconnected from mains.
CAUTION!
Measure or do a check of the encoder supply voltage of the encoder interface board
before you connect a new encoder. The encoder supply voltage might have been set
to a higher voltage than what is supported by the new encoder. An incorrect
encoder supply voltage can cause damage to the equipment.
THE INSTALLATION PROCEDURE
1 Remove the cable cover.
2 Open the cover of the control unit.
VACON · 16 INSTALLATION
4
LOCAL CONTACTS: HTTP://DRIVES.DANFOSS.COM/DANFOSS-DRIVES/LOCAL-CONTACTS/
3 Install the option board into the slot C, D, or E on
the control board of the AC drive. Make sure that
the grounding plate fits tightly in the clamp.
•
The board revision can affect the applicable
installation slot.
4 In IP21, cut free the opening on the cover of the AC
drive for the used option boards.
5 Install the cables.
6 Close the cover of the control unit and put back the
cable cover.
INSTALLATION VACON · 17
LOCAL CONTACTS: HTTP://DRIVES.DANFOSS.COM/DANFOSS-DRIVES/LOCAL-CONTACTS/
4
5 COMMISSIONING
5.1 PREPARING FOR COMMISSIONING
NOTE!
The information in this chapter is also included in the Commissioning report.
The Commissioning report lists relevant instructions for commissioning the option board.
The Commissioning report can be printed from the VACON
®
Safe tool with prefilled data. The
Commissioning report can also be found as an appendix in the VACON
®
NXP Advanced Safety
Options Operating Guide.
If it is possible, commission the AC drive first without the Advanced safety option board to
make sure that your process is operational.
Design the safety system
and create the parameter file
Configure and do the wiring for
the safety system(s)
Commission and validate
the safety system(s)
Fill in and archive the
commissioning documentation
Fig. 6: Preparing and commissioning a safety system that includes the Advanced safety option
board
VACON · 18 COMMISSIONING
5
LOCAL CONTACTS: HTTP://DRIVES.DANFOSS.COM/DANFOSS-DRIVES/LOCAL-CONTACTS/
Preparing for the commissioning before the first start-up of the system with the option
board
•
Read the Advanced safety options Operating Guide and the Commissioning report and
apply their instructions in the commissioning plan.
•
Read the User Manual of the AC drive.
•
Refer to the user manuals of other subsystems connected to the commissioned drive
system.
•
Define the parameter file for the Advanced safety option board.
•
Make sure that the hardware and configuration are correct, and that the software is
correct in the components of the AC drive and its subsystems.
•
Make sure that the information of the commissioned AC drive matches the information in
the commissioning plan and the Commissioning report.
•
Make sure that the connections between different systems have been checked and are
ready to be used.
•
Make sure that the area affected by the commissioned systems is free and secure for the
commissioning.
•
Make sure that no danger can be caused to personnel if the system has been configured
incorrectly and behaves unexpectedly.
•
Make sure that the AC drive is correctly parameterised and commissioned for use.
•
The motor parameters have been set.
•
The identification run has been done. Preferred identification type: identification with
run or encoder ID run.
•
The fieldbus connection can be established. If a fieldbus is used.
•
Have a computer available with a software to control and parameterise the AC drive and
the option boards, and to store test logs and parameters.
•
Have the Commissioning report available.
Document the deviations compared to expected results during the commissioning and
testing procedures. Do not release the system for use if any unacceptable deviations exist.
5.2 PARAMETERISATION PROCESS
Use the VACON
®
Safe tool to parameterise the Advanced safety option board.
The parameterisation process of the Advanced safety option board has 4 steps.
1.
Selection of safety functions ("Select functions" in the tool).
2.
Editing the safety functions ("Adjust parameters" in the tool).
3.
Verifying the transfer of parameters to the option board ("Verify and Approve" in the tool).
4.
Validation of the parameter file ("Validate" in the tool).
COMMISSIONING VACON · 19
LOCAL CONTACTS: HTTP://DRIVES.DANFOSS.COM/DANFOSS-DRIVES/LOCAL-CONTACTS/
5
Operator actions Advanced safety option board
actions
Initial parameterisation
- Parameterisation of
speed measurement
- Parameterisation of
safe fieldbus
- Parameterisation of
safety functions
Verification of parameters
- Comparison of sent and
readback values
- Approval of parameters
Finalisation
- Storing of the final
parameter file
- Documentation of
parameterisation
Parameter file check
- Compatibility check
of parameters
Parameter file verification
- Adding verification
confirmation
- Calculation of final CRC
- Parameter file taken into
use
- Parameter file with
validation information
stored
PC
Advanced
safety
option
board
Send parameter file to drive
Parameter file readback for verification
Operator approval
Upload parameter file
Commissioning & testing of the safety system
PC
PC
Advanced
safety
option
board
Validation of parameters
- Adding validation
information
PC
Send validation information
Advanced
safety
option
board
Fig. 7: The process of creating a new parameter file
VACON · 20 COMMISSIONING
5
LOCAL CONTACTS: HTTP://DRIVES.DANFOSS.COM/DANFOSS-DRIVES/LOCAL-CONTACTS/
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
/