NightSearcher New 10K Tower Pro – Collapsible Hybrid-Powered Floodlight, Rechargeable + AC Powered Owner's manual

  • Hello! I've reviewed the user manual for the NightSearcher Tower Pro 10K. This manual covers instructions for setting up the tower light, how to adjust light modes and beam color, and how to use the power bank feature. The device can be powered by a battery or direct AC power supply. I am ready to answer your questions about this product.
  • How long does it take to charge the floodlight?
    Can the light be used when plugged into AC mains?
    What is the purpose of ground spikes?
Tower Pro 10K - User manual
Setting up the Tower Pro:
1. Slide button and lift leg to
unlock each leg.
2. Unfold each leg out into position.
4. Pull out the light heads and
rotate swivel to desired angle.
Supplied with: Tower light,
carry bag and AC charger.
Charging Socket
Insert plug into socket
and tighten hand wheel.
Charging the oodlight
Battery Charging
and Status Indicators
The light can be used continuously
when plugged into AC mains but it will
only operate on medium mode.
3. Unlock
extending clamp
and extend both
poles to desired
height and lock
clamps.
4.5 hours charging time.
360°
90°
Power bank
to charge
your phone
Product weight 6.49kg
Product size (mm) 150x647mm
NS Part No. NSTOWERPRO-10K
All NightSearcher products have a 3-year standard warranty
on all manufacturing defects and 1-year warranty on all
rechargeable batteries from the date of purchase.
For extended 5 year warranty please visit
https://nightsearcher.co.uk/en/extended-warranty.html
proof of purchase is required
NightSearcher Limited
Unit 4 Applied House, Fitzherbert Spur, Farlington,
Portsmouth, Hampshire, PO6 1TT, UK
T: +44 (0)23 9238 9774
E: sales@nightsearcher.co.uk
Tower Pro 10K - User manual
5. Setting up the Tower Pro Continued...
Carry handle
Built-in cable and charger
wrapping system for tidy storage.
Reversible ground spikes:
The Tower Pro comes with ground spikes, ideal for using on uneven ground. To release these
unscrew using a screw driver, pull out the spike and rotate and push back into hole to secure into place.
The Tower Pro 10K can also be used as oor light.
Drop down retractable feet.
Rotate the light heads
so they face outwards.
5. Press button to turn
the light ON/OFF again to
change light modes:
Low Medium High Off
6. Use this button to change the light beam from
cool white to warm white.
/