FURNITUREBOX Portland Coffee Table Assembly Instruction Manual

  • Hello! I've reviewed the assembly guide for the Portland Coffee Table. This document outlines the necessary steps for assembling your new table, including safety advice, tool recommendations, and care instructions. I'm here to help you with any questions you might have regarding its assembly or features. Please feel free to ask!
  • What tools are recommended for inserting screws?
    How should I clean the coffee table?
    What is the maximum weight capacity of the assembled table?
    How many people are needed for assembly?
PORTLAND
COFFEE TABLE
ASSEMBLY GUIDE
www.furniturebox.co.uk
Scan QR code for more tips,
advice and assembly video or visit
furniturebox.co.uk/club/portland-coffee
SCAN ME
Check you have all the components and
tools listed.
Remove all ttings from the plastic bags
and separate them into their groups.
We do not recommend the use of power
drills/drivers for inserting screws, as this
could damage the unit. Only use hand
screwdrivers and Allen keys.
Keep children and animals away from the
work area, small parts could cause choking
if swallowed.
Make sure you have enough space to
layout the parts before starting.
Assemble the item as close to its nal
position (in the same room) as possible.
Do not overtighten the nuts to avoid
causing damage to the threads.
Important - Please read these instructions fully before starting assembly
SAFETY AND
CARE ADVICE
!
NO POWER TOOLS
Follow us on Instagram
@furniturebox_uk
Only clean using a damp
cloth and mild detergent,
do no use bleach or
abrasive cleaners.
From time to time check
that there are no loose
screws on this unit
This product should not be
discarded with household
waste. Take to your local
authority waste disposal
centre
SAFETY AND CARE ADVICE
www.furniturebox.co.uk
PLEASE CHECK CAREFULLY AND MAKE SURE YOU HAVE ALL
FITTINGS AND TOOLS LISTED BELOW BEFORE YOU START.
NOTE: The quantities above are the correct amount to complete the assembly. In
some cases more ttings may be supplied than are required.
IMPORTANT INFORMATION
TWO
PERSON
MAXIMUM
CAPACITY 100Kg
30 MINUTE
BUILD
GLASS
Follow us on Instagram
@furniturebox_uk
STEP 1
Put the pieces on a soft at
surface e.g. a carpet to avoid
scratching or bumping. Insert
the threaded rod (A) into the
aluminium alloy on the glass
table top (1).
STEP 2
Connect the pillar (2)
through the threaded rods
(A) to the table top (1).
www.furniturebox.co.uk
FULL ASSEMBLY INSTRUCTIONS
STEP 3
Install the table base (3),
fasten screw nut (B), metal
wash er (C) with spanner (D).
Cover with sticker (E)
STEP 4
ATTENTION: With help, turn
the table around to complete
assembly.
www.furniturebox.co.uk
The cushions (foam inserts and
covers) are not covered by the guarantee.
/