Gigabyte Z590 D Installation guide

Brand: Gigabyte

Model: Z590 D

Type: Installation guide

- 1 -

Conguring Audio Input and Output

1-1 Conguring2/4/5.1/7.1-ChannelAudio............................................................... 2

1-2 ConguringS/PDIFOut...................................................................................... 6

1-3 StereoMix........................................................................................................... 6

1-4 UsingtheVoiceRecorder................................................................................... 8

-2-

1-1 Conguring 2/4/5.1/7.1-Channel Audio

Afteryouinstalltheincludedmotherboarddrivers,makesureyourInternetconnectionworksproperly.thesystem

willautomaticallyinstalltheaudiodriverfromMicrosoftStore.Restartthesystemaftertheaudiodriverisinstalled.

Thepicturetotherightshowsthedefaultsixaudio

jacksassignment.

Center/Subwoofer

SpeakerOut LineIn

RearSpeakerOut FrontSpeakerOut

MicIn

SideSpeaker

Out

Center/Subwoofer

SpeakerOut LineIn

RearSpeakerOut FrontSpeakerOut

MicIn

Thepicturetotherightshows the defaultveaudio

jacksassignment.

Tocongure4/5.1/7.1-channelaudio,youhavetoretask

eithertheLineinorMicinjacktobeSidespeakerout

throughtheaudiodriver.

Youcanchangethefunctionalityofanaudiojackusingtheaudiosoftware.

AudioJackCongurations:

Jack Headphone/

2-channel 4-channel 5.1-channel 7.1-channel

Center/SubwooferSpeakerOut a a

RearSpeakerOut a a a

SideSpeakerOut a

LineIn

LineOut/FrontSpeakerOut a a a a

MicIn

AudioJackCongurations:

Jack Headphone/

2-channel 4-channel 5.1-channel 7.1-channel

Center/SubwooferSpeakerOut a a

RearSpeakerOut a a a

LineIn/SideSpeakerOut a

LineOut/FrontSpeakerOut a a a a

MicIn/SideSpeakerOut a

- 3 -

Thepicturetotherightshowsthedefaultthreeaudio

jacksassignment.

LineIn

LineOut

MicIn

Thepicturetotherightshowsthedefaulttwoaudio

jacksassignment. LineOut

MicIn

Youcanchangethefunctionalityofanaudiojackusingtheaudiosoftware.

AudioJackCongurations:

Jack Headphone/

2-channel 4-channel 5.1-channel 7.1-channel

LineIn/RearSpeakerOut aaa

LineOut/FrontSpeakerOut a a a a

MicIn/Center/SubwooferSpeakerOut a a

FrontPanelLineOut/SideSpeakerOut a

AudioJackCongurations:

Jack Headphone/

2-channel 4-channel 5.1-channel 7.1-channel

LineOut/FrontSpeakerOut a a a a

MicIn/RearSpeakerOut aaa

FrontPanelLineOut/SideSpeakerOut a

FrontPanelMicIn/Center/Subwoofer

SpeakerOut a a

-4-

Step4:

OntheSpeakersscreen,clicktheSpeaker Conguration

tab.In theSpeaker Congurationlist, selectStereo,

Quadraphonic,5.1 Speaker,or7.1 Speakeraccording

tothetypeofspeakercongurationyouwishtosetup.

Thenthespeakersetupiscompleted.

B. Conguring Sound Effect

YoumaycongureanaudioenvironmentontheSpeakerstab.

Step3:

ClicktheDevice advanced settingontheleft.Select

theMute the internal output device, when an external

headphone plugged incheckboxtoenable7.1-channel

audio.

Step2:

Connectanaudiodevicetoanaudiojack.TheWhich

device did you plut in ?dialogbox appears. Select

thedeviceaccordingtothetypeofdeviceyouconnect.

ThenclickOK.

A. Conguring Speakers

Step1:

GototheStartmenuclicktheRealtek Audio Console.

Forspeakerconnection,refertotheinstructions

inChapter1,"HardwareInstallation,""BackPanel

Connectors."

-5-

* Conguring the Headphone

WhenyouconnectyourheadphonetotheLineoutjackonthebackpanelorfrontpanel,makesurethedefault

playbackdeviceisconguredcorrectly.

Step1:

Locatethe iconinthenoticationareaandright-click

ontheicon.SelectOpen Sound settings.

Step2:

SelectSound Control Panel.

Step3:

OnthePlaybacktab,makesureyourheadphoneisset

asthedefaultplaybackdevice.Forthedeviceconnected

totheLineoutjackon the back panel, right-click on

Speakers and selectSet as Default Device; for the

deviceconnectedtotheLineoutjackonthefrontpanel,

right-clickonRealtek HD Audio 2nd output.

- 6 -

TheS/PDIFOutjackcantransmitaudiosignalstoanexternaldecoderfordecodingtogetthebestaudioquality.

1. Connecting a S/PDIF Out Header:

ConnectaS/PDIFdigitalaudiocabletooutputdigitalaudiofromyourmotherboardtothesupportedaudio

devices.

1-2 Conguring S/PDIF Out

2. Conguring S/PDIF Out:

OntheRealtek Digital Outputscreen,Selectthesample

rateandbitdepthintheDefault Formatsection.

1-3 Stereo Mix

Step1:

Locatethe iconinthenoticationareaandright-click

ontheicon.SelectOpen Sound settings.

ThefollowingstepsexplainhowtoenableStereoMix(whichmaybeneededwhenyouwanttorecordsound

fromyourcomputer).

S/PDIFOutHeader

F_USB30 F_U

B_ 

F_  F_ 



_

B

BS_

B

SB_

B

_S



S_

_

B

_U

_

B





 

S  

 

123

 

123

 

123

 

123

BSS

S

_S 

SSU

 

1 2 3  

 S3 BSSS



U

 __ 3

F_USB3F

S  _

SF





B_

F

_0

S

S

_0F

_F

_

_

__B





U

S  _S

_ SF_

B 

USB0_B

B_

B_

F_USB3

 F_USB303



_



_3U

S_

-7-

Step2:

SelectSound Control Panel.

Step4:

NowyoucanaccesstheHD Audio Managertocongure

Stereo MixanduseVoice Recordertorecordthesound.

Step3:

OntheRecordingtab,right-clickonStereo Mixitemand

selectEnable.Thensetitasthedefaultdevice.(ifyoudo

notseeStereo Mix,right-clickonanemptyspaceand

selectShow Disabled Devices.)

- 8 -

1-4 Using the Voice Recorder

A. Recording Audio

1. Tobegintherecording,clicktheRecordicon .

2. Tostoptherecording,clicktheStop recording icon .

B. Playing the Recorded Sound

TherecordingswillsavedinDocuments>SoundRecordings.VoiceRecorderrecordsaudioinMPEG-4(.m4a)

format.Youcanplaytherecordingwithadigitalmediaplayerprogramthatsupportstheaudioleformat.

Aftersetting up the audio input device, to open the

Voice Recorder,gototheStartmenuandsearchfor

Voice Recorder.

Gigabyte Z590 D Installation guide

Gigabyte Z590 D Installation guide

Gigabyte Z590 D Installation guide

Related papers