Echo PAS-225SB Pro Attachment Series User manual

X7732274001

Operator’s

Manual

PAS-225 / 225SB

Pro Attachment

Series™

The engine exhaust from this product contains chemicals

known to the State of California to cause cancer, birth defects,

or other reproductive harm.

Read and understand all provided literature before

use. Failure to do so could result in serious injury.

TABLE OF CONTENTS PAS-225

2 X7732274001

TABLE OF CONTENTS

Introduction ................................................................................................. 4

Servicing Information .................................................................................. 4

Parts/Serial Number............................................................................. 4

Service................................................................................................. 5

ECHO Consumer Product Support...................................................... 5

Product Registration ............................................................................ 5

Additional Literature............................................................................. 5

Safety.......................................................................................................... 6

Manual Safety Symbols and Important Information ............................. 6

International Symbols .......................................................................... 7

Personal Condition and Safety Equipment .......................................... 9

Equipment.......................................................................................... 14

Emission Control (Exhaust & Evaporative) .............................................. 15

CARB And EPA Emissions Control Information ................................ 15

Description ................................................................................................ 16

Contents.................................................................................................... 18

Assembly................................................................................................... 18

Support Handle Installation................................................................ 18

Operation .................................................................................................. 19

Fuel.................................................................................................... 19

Operation With Blades....................................................................... 22

Blade Selection.................................................................................. 23

Starting Cold Engine.......................................................................... 25

Starting Warm Engine........................................................................ 26

Stopping Engine ................................................................................ 28

Applications ....................................................................................... 28

Operating Techniques ....................................................................... 29

Reaction Forces................................................................................. 29

Blade Cutting Problems ..................................................................... 30

Maintenance ............................................................................................. 31

Skill Levels ......................................................................................... 31

Maintenance Intervals........................................................................ 32

Air Filter ............................................................................................. 33

Fuel Filter........................................................................................... 34

Spark Plug ......................................................................................... 35

Cooling System.................................................................................. 35

Exhaust System................................................................................. 37

Carburetor Adjustment....................................................................... 39

Lubrication ......................................................................................... 40

PAS-225 TABLE OF CONTENTS

X7732274001 3

PAS-225 SB Only:............................................................................. 41

Lubrication......................................................................................... 41

Nylon Line Head Disassembly Instructions ....................................... 42

Sharpening Metal Blades .................................................................. 42

Troubleshooting........................................................................................ 44

Storage ..................................................................................................... 45

Long Term Storage (Over 30 Days) .................................................. 45

PAS-225 SB Only:............................................................................. 46

Storage Hook Installation .................................................................. 46

Specifications ........................................................................................... 47

ECHO Optional Attachments............................................................. 48

Product Registration ................................................................................. 48

Notes ........................................................................................................ 50

INTRODUCTION PAS-225

4 X7732274001

INTRODUCTION

Specifications, descriptions and illustrative material in this literature are as

accurate as known at the time of publication, but are subject to change

without notice. Illustrations may include optional equipment and

accessories, and may not include all standard equipment.

Read and understand all provided literature.

Literature contains specifications and

information for safety, operation,

maintenance, storage and assembly specific

to this product. Scan QR codes for more

information.

For additional literature, including safety manuals where applicable, or

questions regarding terms used in this manual, visit:

https://www.echo-usa.com/manuals

OR

https://www.shindaiwa-usa.com/manuals

SERVICING INFORMATION

Parts/Serial Number

Genuine ECHO Parts and

Assemblies for your ECHO

products are available only from

an Authorized ECHO Dealer.

When you do need to buy parts

always have the Model Number

and Serial Number of the unit with

you. For future reference write

them in the space provided below.

Model No. _______________

Serial No. _______________

PAS-225 SERVICING INFORMATION

X7732274001 5

Service

Service of this product during the warranty period must be performed by an

Authorized ECHO Service Dealer. For the name and address of the

Authorized ECHO Service Dealer nearest you, ask your retailer or call:

1-800-432-ECHO (3246). Dealer information is also available on our Web

Site www.echo-usa.com. When presenting your unit for Warranty service/

repairs, proof of purchase is required.

ECHO Consumer Product Support

If you require assistance or have questions concerning the application,

operation, or maintenance of this product, call the ECHO Consumer

Product Support Department at 1-800-673-1558 from 8:00 am to 5:00 pm

(Central Standard Time) Monday through Friday. Before calling, please

know the model and serial number of your unit.

Product Registration

Register your ECHO equipment on-line at www.echo-usa.com or by filling

out the product registration sheet included in this manual. Registering your

product confirms warranty coverage and provides a direct link to ECHO if

we find it necessary to contact you.

Additional Literature

In addition to finding information online, information is available from your

Authorized ECHO Service Dealer, or by contacting ECHO Inc., 400

Oakwood Road, Lake Zurich, IL 60047 (800-673-1558).

Safety Videos are available from your Authorized ECHO Service Dealer. A

$5.00 shipping charge is required for each video.

SAFETY PAS-225

6 X7732274001

SAFETY

Manual Safety Symbols and Important Information

Throughout this manual and on the product itself, you will find safety alerts

and helpful, informational messages preceded by symbols or key words.

The following is an explanation of those symbols and key words and what

they mean to you.

The safety alert symbol accompanied by the word “DANGER”

calls attention to an act or condition which WILL lead to serious

personal injury or death if not avoided.

The safety alert symbol accompanied by the word “WARNING”

calls attention to an act or condition which CAN lead to serious

personal injury or death if not avoided.

The safety alert symbol accompanied by the word “CAUTION”

calls attention to an act or condition which may lead to minor or

moderate personal injury if not avoided.

The enclosed message provides information necessary for the

protection of the unit.

Note: This enclosed message provides tips for use, care and

maintenance of the unit.

CIRCLE AND SLASH SYMBOL

This symbol means the specific action shown is prohibited.

Ignoring these prohibitions can result in serious or fatal injury.

PAS-225 SAFETY

X7732274001 7

International Symbols

Symbol Description Symbol Description

Warning, See

Operator’s Manual

Carburetor Adjustment -

High Speed Mixture

Wear Eye, Ear and

Head Protection

Carburetor Adjustment -

Idle Speed

Wear Hand and Foot

Protection

Carburetor Adjustment -

Low Speed Mixture

Safety / Alert Emergency Stop

Hot Surface Fuel and Oil Mixture

AVOID KICKOUT

Keep Bystanders At Least

15 m (50 ft.) Away

Beware Thrown Objects

Wear Eye Protection

Keep Bystanders and Helpers

Away 15 m (50 ft.)

DO NOT Allow Flames

or Sparks Near Fuel

Ignition

ON / OFF

H

T

L

SAFETY PAS-225

8 X7732274001

DO NOT Smoke Near

Fuel Primer Bulb

Choke Control “RUN”

Position (Choke Open)

Choke Control “COLD

START” Position (Choke

Closed)

Keep Feet Away

From Blade

Rotating Cutting

Attachment

Thrown Objects Wear Face Shield

Finger Severing Wear Slip Resistant

Footwear

Do not operate closer

than 15 m (50 ft.) from

electrical hazards.

Keep bystanders at

least 15 m (50 ft.)

away.

DO NOT USE BLADES -

Line Head Only

Plan retreat path from

falling objects.

Symbol Description Symbol Description

PAS-225 SAFETY

X7732274001 9

Personal Condition and Safety Equipment

Cancer and Reproductive Harm

www.P65Warnings.ca.gov

The muffler or catalytic muffler and surrounding cover

may become extremely hot. Always keep clear of

exhaust and muffler area, otherwise serious personal

injury may occur.

Users of this product risk injury to themselves and others if the

unit is used improperly and/or safety precautions are not

followed. Proper clothing and safety gear must be worn when

operating unit.

Physical Condition

Your judgment and physical dexterity may not be good:

• If you are tired or sick

• If you are taking medication

• If you have taken alcohol or drugs

Operate unit only if you are physically and mentally well.

Eye Protection

◆Eye protection that meets ANSI Z87.1 or CE requirements

must be worn whenever you operate the unit.

◆For additional safety, a full-face shield may be worn over

safety glasses or goggles to provide protection from sharp

branches or flying debris.

SAFETY PAS-225

10 X7732274001

Hand Protection

Wear sturdy, no-slip, rubber work gloves to improve your grip on the

handles. Gloves also provide protection against cuts and scratches, cold

environments, and reduce the transmission of machine vibration to your

hands.

Hearing/Ear Protection

ECHO recommends wearing personal protection whenever unit is used.

Breathing Protection

Operators who are sensitive to dust or other common airborne allergens

may need to wear a dust mask to prevent inhaling these materials while

operating unit. Dust masks can provide protection against dust, plant debris,

and other plant matter such as pollen. Make sure the mask does not impair

your vision, and replace the mask as needed to prevent air restrictions.

Proper Clothing

Wear snug-fitting, durable clothing:

• Pants should have long legs, shirts should have long sleeves.

• DO NOT WEAR SHORTS.

• DO NOT WEAR TIES, SCARVES, JEWELRY, or clothing with loose or

hanging items that could become entangled in moving parts or

surrounding growth.

• Keep clothing buttoned or zipped, and keep shirt tails tucked in.

Wear sturdy work shoes with nonskid rubber soles:

• DO NOT WEAR OPEN TOED SHOES.

• DO NOT OPERATE UNIT BAREFOOTED.

Keep long hair away from engine and air intake. Retain hair with cap or net.

Heavy protective clothing can increase operator fatigue, which may lead to

heat stroke. Schedule heavy work for early morning or late afternoon hours

when temperatures are cooler.

PAS-225 SAFETY

X7732274001 11

The components of this machine generate an electromagnetic

field during operation, which may interfere with some

pacemakers. To reduce the risk of serious or fatal injury,

persons with pacemakers should consult with their physician

and the pacemaker manufacturer before operating this

machine. In the absence of such information, ECHO does not

recommend the use of this machine by anyone who has a

pacemaker.

Extended Operation / Extreme Conditions

Prolonged exposure to cold and/or vibration may result in

injury. Read and follow all safety and operation instructions to

minimize risk of injury. Failure to follow instructions may result

in painful wrist/hand/arm injuries.

It is believed that a condition called Raynaud’s Phenomenon, which affects

the fingers of certain individuals, may be brought about by exposure to

vibration and cold. Exposure to vibration and cold may cause tingling and

burning sensations, followed by loss of color and numbness in the fingers.

The following precautions are strongly recommended, because the

minimum exposure, which might trigger the ailment, is unknown.

• Keep your body warm, especially the head, neck, feet, ankles, hands, and

wrists.

• Maintain good blood circulation by performing vigorous arm exercises

during frequent work breaks, and also by not smoking.

• Limit the hours of operation. Try to fill each day with jobs where operating

the unit or other hand-held power equipment is not required.

• If you experience discomfort, redness, and swelling of the fingers followed

by whitening and loss of feeling, consult your physician before further

exposing yourself to cold and vibration.

SAFETY PAS-225

12 X7732274001

Repetitive Stress Injuries (RSI)

It is believed that overusing the

muscles and tendons of the fingers,

hands, arms, and shoulders may

cause soreness, swelling,

numbness, weakness, and extreme

pain in those areas. Certain

repetitive hand activities may put

you at a high risk for developing a

Repetitive Stress Injury (RSI). An

extreme RSI condition is Carpal

Tunnel Syndrome (CTS), which

could occur when your wrist swells

and squeezes a vital nerve that runs

through the area. Some believe that

prolonged exposure to vibration may

contribute to CTS. CTS can cause

severe pain for months or even

years.

To reduce the risk of RSI/CTS, do

the following:

• Avoid using your wrist in a bent, extended, or twisted position. Instead try

to maintain a straight wrist position. Also, when grasping, use your whole

hand, not just the thumb and index finger.

• Take periodic breaks to minimize repetition and rest your hands.

• Reduce the speed and force with which you do the repetitive movement.

• Do exercises to strengthen the hand and arm muscles.

• Immediately stop using all power equipment and consult a doctor if you

feel tingling, numbness, or pain in the fingers, hands, wrists, or arms. The

sooner RSI/CTS is diagnosed, the more likely permanent nerve and

muscle damage can be prevented.

All over head electrical conductors and communications wires

can have electricity flow with high voltages. This unit is not

insulated against electrical current. Never touch wires directly

or indirectly, otherwise serious injury or death may result.

PAS-225 SAFETY

X7732274001 13

Do not operate this product indoors or in inadequately

ventilated areas. Engine exhaust contains poisonous emissions

and can cause serious injury or death.

Read the Manuals

• Provide all users of this equipment with the Operator’s Manual for

instructions on Safe Operation.

Clear the Work Area

• Spectators and fellow workers must be warned, and children and animals

prevented from coming nearer than 15 m (50 ft.) while the unit is in use.

Keep a Firm Grip

• Always hold throttle handle and support handle with thumbs and fingers

tightly encircling the handles.

Keep a Solid Stance

• Maintain footing and balance at all times. Do not stand on slippery,

uneven or unstable surfaces. Do not work in odd positions or on ladders.

Do not overreach.

Avoid Hot Surfaces

• During operation, the drive shaft housing and

attachment bearing housing may become very hot,

too hot to touch. Avoid contact during and

immediately after operation.

SAFETY PAS-225

14 X7732274001

Equipment

Use only ECHO attachments. Serious injury may result from the

use of a non-approved attachment combination. ECHO, INC. will

not be responsible for the failure of cutting devices,

attachments or accessories which have not been tested and

approved by ECHO. Read and comply with all safety

instructions listed in this manual and safety manual.

◆Check unit for loose/missing nuts, bolts, and screws.

Tighten and/or replace as needed.

◆Inspect guards and shields for damage and to ensure that

they are securely in place. Replace if damaged or missing.

◆Check that the attachment is firmly attached and in safe

operating condition.

◆Check that handle and harness (if included) are adjusted

for safe, comfortable operation. See Assembly Section for

proper adjustment.

Moving parts can amputate fingers or cause severe injuries.

Keep hands, clothing and loose objects away from all openings.

◆ALWAYS stop engine, disconnect spark plug, and make

sure all moving parts have come to a complete stop before

removing obstructions, clearing debris, or servicing unit.

◆DO NOT start or operate unit unless all guards and

protective covers are properly assembled to unit.

◆NEVER reach into any opening while the engine is running.

Moving parts may not be visible through openings.

Periodically check fuel system (fuel lines, vent, grommet, fuel

tank, and fuel cap) for leaks especially if the unit is dropped. If

damage or leaks are found, do not use unit, otherwise serious

personal injury or property damage may occur. Have unit

repaired by an authorized servicing dealer before using.

PAS-225 EMISSION CONTROL

X7732274001 15

EMISSION CONTROL (EXHAUST &

EVAPORATIVE)

CARB And EPA Emissions Control Information

The emission control system for

the engine is EM (engine

modification) and, if the second to

last character of the Engine Family

on the Emission Control

Information label (sample below) is

“B”, “C”, “K”, or “T”, the emission

control system is EM and TWC (3-

way catalyst). The fuel tank/fuel

line emission control system is EVAP (evaporative emissions). Evaporative

emissions for California models are only applicable to fuel tanks.

An Emission Control Label is

located on the engine. (This is an

EXAMPLE ONLY, information on

label varies by engine FAMILY).

Product Emission Durability

(Emission Compliance

Period)

The 50 or 300 hour emission compliance period is the time span selected by

the manufacturer certifying the engine emissions output meets applicable

emissions regulations, provided that approved maintenance procedures are

followed as listed in the Maintenance Section of this manual.

DESCRIPTION PAS-225

16 X7732274001

DESCRIPTION

Locate the safety decal(s) on your unit. Make sure the decal(s) is legible and

that you understand and follow the instructions on it. If a decal cannot be

read, a new one can be ordered from your ECHO dealer. Safety label is for

example only. Your label my appear slightly different.

21

14

15

17

16

13

18

19

20

1

2

3

4

5

6

7

12

10

8

11

9

PAS-225 DESCRIPTION

X7732274001 17

1. Power Head

2. Throttle Handle - For Right Hand

3. Throttle Trigger Lockout

4. Stop Switch

5. Support Handle - For Left Hand

6. Upper Drive Shaft Assembly

7. Drive Shaft Coupler

8. Lower Drive Shaft Assembly

9. Nylon Cutting Attachment

10. Cut-off Knife

11. Debris Shield With Cut-off Knife

12. Throttle Trigger

13. Top Guard

14. Spark Arrestor Muffler Or Spark Arrestor Muffler With Catalyst

15. Fuel Tank

16. Recoil Starter Handle

17. Fuel Tank Cap

18. Purge Bulb

19. Choke

20. Air Cleaner

21. Spark Plug

CONTENTS PAS-225

18 X7732274001

CONTENTS

The ECHO product you purchased has been factory pre-assembled for your

convenience. Due to packaging restrictions, some assembly may be

necessary.

After opening the carton, check for damage. Immediately notify your retailer

or ECHO Dealer of damaged or missing parts. Use the contents list to check

for missing parts.

ASSEMBLY

Support Handle Installation

Note: Label shows minimum

spacing for support

handle location.

1. If necessary, position support

handle for comfortable

operation and securely tighten

screws.

1 Power Head with Upper Drive Shaft Assembly

1 Lower Drive Shaft Trimmer Attachment*

1 Operator's Manual

1 Warranty Statement

1 Storage Hook Assembly*

*Included with PAS-225SB only

PAS-225 OPERATION

X7732274001 19

OPERATION

Moving parts can amputate fingers or cause severe injuries.

Keep hands, clothing and loose objects away from all openings.

Always stop engine, disconnect spark plug, and make sure all

moving parts have come to a complete stop before removing

obstructions, clearing debris, or servicing unit.

Engine exhaust IS HOT, and contains Carbon Monoxide (CO), a

poison gas. Breathing CO can cause unconsciousness, serious

injury, or death. Exhaust can cause serious burns. ALWAYS

position unit so that exhaust is directed away from your face

and body.

Operation of this equipment may create sparks that can start

fires around dry vegetation. This unit is equipped with a spark

arrestor to prevent discharge of hot particles from the engine.

Metal cutters can also create sparks if the cutter strikes rocks,

metal, or other hard objects. Contact local fire authorities for

laws or regulations regarding fire prevention requirements.

Fuel

Diesel fuels and alternative fuels, such as E-15 (15% ethanol),

E -85 (85% ethanol) or any fuels not meeting ECHO

requirements are NOT approved for use in ECHO 2-stroke

gasoline engines. Use of diesel or alternative fuels may cause

performance problems, loss of power, overheating, fuel vapor

lock, and unintended machine operation, including, but not

limited to, improper clutch engagement. Diesel or alternative

fuels may also cause premature deterioration of fuel lines,

gaskets, carburetors and other engine components.

OPERATION PAS-225

20 X7732274001

Fuel Requirements

Gasoline - Use 89 Octane [R+M/2] (mid grade or higher) gasoline known to

be good quality. Gasoline may contain up to 10% Ethanol (grain alcohol) or

15% MTBE (methyl tertiary-butyl ether). Gasoline containing methanol

(wood alcohol) is NOT approved. Use of ECHO branded fuel is

recommended to extend engine life in all air-cooled 2-stroke and 2/4-stroke

hybrid engines.

Two Stroke Oil - A two-stroke engine oil, such as ECHO branded 2-stroke

oils, meeting ISO-L-EGD (ISO/CD 13738) and J.A.S.O. FD Standards must

be used. ECHO branded 2-stroke oils meet these standards. Engine

problems due to inadequate lubrication caused by failure to use an ISO-L-

EGD (ISO/CD 13738) and J.A.S.O. M345-FD certified oil will void the two-

stroke engine warranty.

2-Stroke engine oil contains petroleum distillates and other

additives that may be harmful if swallowed. Heated oil can

release vapors that can cause flash fire, or ignite with explosive

force. Read and follow the oil manufacturer’s instructions, and

observe all safety warnings and precautions for handling

flammable liquids. For more detailed safety and first aid

information, visit www.echo-usa.com for a copy of the Material

Safety Data Sheet.

◆KEEP OUT OF REACH OF CHILDREN.

◆If swallowed, do not induce vomiting. CALL PHYSICIAN OR

A POISON CONTROL CENTER IMMEDIATELY.

◆WEAR SAFETY GLASSES when mixing or handling.

◆AVOID repeated or prolonged skin contact

◆AVOID inhaling oil mists or vapors.

ECHO branded 2-stroke oils may be mixed at 50:1 ratio for

application in all ECHO engines sold in the past regardless of ratio

specified in those manuals.

Handling Fuel

Fuel is VERY flammable. Use extreme care when mixing, storing

or handling, or serious personal injury may result.

Page is loading ...

Echo PAS-225SB Pro Attachment Series User manual

This manual is also suitable for

Echo PAS-225SB Pro Attachment Series User manual

Related papers

Other documents