2. Home
  3. Home security & automation
  4. Door intercom systems
  5. Eyevision
  6. IP Gateway Converter Two Wire Video Intercom System
IP Gateway Converter Two Wire Video Intercom System

Eyevision IP Gateway Converter Two Wire Video Intercom System User manual

  • Hello! I've reviewed the user manual for the Eyevision LinkBox IP Gateway Converter and their video intercom systems. This document provides clear instructions on how to use the device, its features like call diverting to mobile phones, its memory module, and how to set it up with your intercom system. I am ready to answer your questions about the device and its functionalities.
  • What is the primary function of the Eyevision LinkBox?
    How does the 'DO NOT DISTURB' mode affect call diversion?
    What if the internet connection is unavailable?
IP Gateway Converter
EV-LinkBox-V01.02
Eyevision Two Wire
Video Intercom Systems
Accessories
2-Wire System
IP Converter
Eyevision LinkBox
IP Gateway Converter
User Manual
Please read this manual carefully before using the product you purchase, and keep it well for
future use.We reserve the right to modify the specification in this manual at any time without
notice.
2-Wire System
Power In-Use
IP Converter
Model: IPG-Gateway
Net Video
CHECK CALL
DT-CHK IP-CHK
RJ45: Network connection terminal.
BUS(IM): Indoor monitor connection terminal.
BUS(DS): Door station connection terminal.
Connection Ports
1 2 3 4 5 6
ON
2-Wire System
Power In-Use
IP Converter
Model: IPG-Gateway
Net Video
CHECK CALL
DT-CHK IP-CHK
Indicators Buttons
RJ45 BUS(IM)
BUS(DS)
DIP Switch
IP Gateway Converter Operating Instructions
1. Application:
Eyevision® 2 wire LinkBox module can be used to divert calls to phone with
internet connection
With Internet:
Divert calls to mobile from Eyevision® LinkBox.
1. Diverts immediately on the monitor, If the “DO NOT DISTURB” mode is ON
2. If “DO NOT DISTURB” mode is OFF that will divert calls after 30 sec.
Without Internet:
As Memory Module provide 200 photos memory for all monitor connected.
2. Terminal Description:
We reserve the right to modify the speciecation in this manual at any time without notice. -1-
On Eyevision LinkBox, there are DIP Switches, Buttons and Indicator LEDs
for setup Eyevision LinkBox, bellows are some generally explains.
When DIP Switches all in OFF position, means Eyevision LinkBox is in
Dynamic IP ad dress.
Subnet address please refer to the followings in detail.
1 2 3 4 5
ON
6
3. Indicators:
DIP Switch:
-2-
The buttons operate as shown below
Buttons:
Press once Press until “In-use” on Press until “Video” on
CHECK Copy picture and log to
SD card.
CALL
DT-CHK
Buttons
Status
Delete all call logs and format
SD card, twice to confirm.
*Long press 4 times to initialize
Eyevision LinkBox, format all
data.
DT 2 -Wire door stations and
monitor online check.
off Solid On Quick flash Regularly flash
Power No Power Standby and power
on Starting
In-use Standby/No Power In auto-testing
Net Not connected Connected without
SIP registered
Con necte d w ith
SIP registered
Video Standby/No Power As video output Re co rdi ng /Pl ay -
back
LEDs
Status
Indicators LEDs mean as described below.
Indicator LEDs:
2-Wire System
Power In-Use
IP Converter
Model: IPG-Gateway
Net Video
CHECK CALL
DT-CHK IP-CHK
1 2 3 4 5 6
ON
BUS(DS)
IP Address
BUS(IM)
Buttons
Indicator LEDs
4. Mounting:
5. Wiring:
2-Wire System
Power In-Use
IP Converter
Model: IPG-Gateway
Net Video
CHECK CALL
DT-CHK IP-CHK
1 2 3 4 5 6
ON
BUS(DS)
IP Address
BUS(IM)
To Ethernet
To Door Station / Power Supply BUS(IM)
To Monitors / Branch Distributor
2-Wire System
Power In-Use
IP Converter
Model: IPG-Gateway
Net Video
CHECK CALL
DT-CHK IP-CHK
1 2 3 4 5 6
ON
BUS(DS)
IP Address
BUS(IM)
Step1:
Mount the din rail to the wall with
screws;
Step2:
Pull down the mounting buckle,
and hang the LinkBox on din rail. Din rail
Din rail
Mounting Buckle
Memory
Card
SD
Basic Connection
-
+
Doorbell Button
Switch
1 2 3
ON
DIPS
L1 L2 PL S+ S-
DPS(V2)HDR-30-24
-3-
1 2 3
4 5 6
7 8 9
*0
#
Front
Back
6.Specification:
Power: 2-wire bus (26V, no-polarity)
Consumption current: Standby 109mA, maximum131mA
LAN Ethernet: 10BASE-T, 100BASE-TX
Audio codec: G.711(64Kbps)
Video codec : H.264/AVC (VGA, QVGA)
Network Protocol: IPv4, TCP, UDP, RTSP, RTP,
RTCP, IGMP, DHCP, NTP
Operating temperature: 0 °C ~ +40 °C
Dimension: 72*90*60mm
-4-
2-Wire System
Power In-Use
IP Converter
Model: IPG-Gateway
Net Video
CHECK CALL
DT-CHK IP-CHK
1 2 3 4 5 6
ON
BUS(DS)
IP Address
BUS(IM)
Multi Monitors Connection
L1 L2 PL S+ S-
Code=1 Code=0
DPS(V2)HDR-30-24
(Device Address:0)
1 2 3
4 5 6
7 8 9
*0
#
Note
The design and specifications can be modified without notice to the user. Right to interpret
and copyright of this manual are reserved.
Eyevision Two Wire
Video Intercom
Systems
EV-D298KP-SM
EV-D298KP-FM EV-2W-7
EV-D301
/