Contest Evora SP60 User manual

Brand: Contest

Model: Evora SP60

Category: Floodlights

Type: User manual

This manual is also suitable for

Evora-SP60

Contest Evora SP60 is a compact moving head that is an excellent choice for parties, live events, and other events. It features a 60W LED light source, a 15-1970 Lux beam at 5m, and a motorized focus. It also has a gobos wheel with 7 gobos, a 3-facet and 3D prism, and a frost filter. The Evora SP60 can be controlled via DMX, master/slave or music-sensitive modes, and it has a built-in musical programs.

USER GUIDE

10074 - November 2013 Version 1.2

60W LED MOVING HEAD WITH MOTORIZED FOCUS AND PRISMS

Evora-SP60 - 60W LED compact moving head with motorized focus and prisms

Page 2

English

Evora-SP60 - 60W LED compact moving head with motorized focus and prisms

Page 3

English

1 - Safety information

This symbol signals an important safety precaution.

The CAUTION symbol signals a risk of product deterioration.

The WARNING symbol signals a risk to the user’s physical integrity.

The product may also be damaged.

Important safety information

Symbols used

Any maintenance procedure must be performed by a CONTEST

authorised technical service. Basic cleaning operations must tho-

roughly follow our safety instructions.

This product contains non-isolated electrical components. Do not

undertake any maintenance operation when it is switched on as it

may result in electric shock.

This unit is intended for indoor use only. Do not use it in a wet,

or extremely cold/hot locations. Failure to follow these safety ins-

tructions could result in fire, electric shock, injury, or damage to

this product or other property.

WARNING : This unit contains no user-serviceable parts. Do not

open the housing or attempt any maintenance by yourself. In the

unlikely even your unit may require service, please contact your

nearest dealer.

In order to avoid any electrical malfunction, please do not use any

multi-socket, power cord extension or connecting system without

making sure they are perfectly isolated and present no defect.

Recycling your device

• As HITMUSIC is really involved in the environmental cause,

we only commercialise clean, ROHS compliant products.

• When this product reaches its end of life, take it to a

collection point designated by local authorities. The separate

collection and recycling of your product at the time of disposal

will help conserve natural resources and ensure that it is

recycled in a manner that protects human health and the

environment.

Instructions and recommendations

10 - Electric power supply :

This product can only be operated according to a very specific voltage. These

information are specified on the label located at the rear of the product.

11 - Power cords protection:

Power-supply cords should be routed so that they are not likely to be walked on or

pinched by items placed upon or against them, paying particular attention to cords at

lugs, convenience receptacles and the point where they exit from the fixture.

12 - Cleaning precautions :

Unplug the product before attempting any cleaning operation. This product should be

cleaned only with accessories recommended by the manufacturer. Use a damp cloth

to clean the surface. Do not wash this product.

13 - Long periods of non use :

Disconnect the unit’s main power during long periods of non use.

14 - Liquids or objects penetration :

Do not let any object penetrate this product as it may result in electric shock or fire.

Never spill any liquid on this product as it may infiltrate the electronic components

and result in electric shock or fire.

15 - This product should be serviced when :

Please contact the qualified service personnel if :

- The power cord or the plug has been damaged.

- Objects have fallen or liquid has been spilled into the appliance.

- The appliance has been exposed to rain or water.

- The product does not appear to operate normally.

- The product has been damaged.

16 - Inspection/maintenance :

Please do not attempt any inspection or maintenance by yourself. Refer all servicing

to qualified personnel.

17 - Operating environment :

Ambient temperature and humidity: +5 - +35°C, relative humidity must be less than

85% (when cooling vents are not obstructed).

Do not operate this product in a non-ventilated, very humid or warm place.

1 - Please read carefully :

We strongly recommend to read carefully and understand the safety instructions before

attempting to operate this unit.

2 - Please keep this manual :

We strongly recommend to keep this manual with the unit for future reference.

3 - Operate carefully this product :

We strongly recommend to take into consideration every safety instruction.

4 - Follow the instructions:

Please carefully follow each safety instruction to avoid any physical harm or property

damage.

5 - Avoid water and wet locations :

Do not use this product in rain, or near washbasins or other wet locations.

6 - Installation :

We strongly encourage you to only use a fixation system or support recommended

by the manufacturer or supplied with this product. Carefully follow the installation

instructions and use the adequate tools.

Always ensure this unit is firmly fixed to avoid vibration and slipping while operating

as it may result in physical injury.

7 - Ceiling or wall installation :

Please contact your local dealer before attempting any ceiling or wall installation.

8 - Ventilation :

The cooling vents ensure a safe use of this product, and avoid any overheating risk.

Do not obstruct or cover these vents as it may result in overheating and potential

physical injury or product damage. This product should never been operated in a

closed non-ventilated area such as a flight case or a rack, unless cooling vents are

provided for the purpose .

9 - Heat exposure :

Sustained contact or proximity with warm surfaces may cause overheating and product

damages. Please keep this product away from any heat source such as a heaters,

amplifiers, hot plates, etc...

Warning

This product is equipped with Class 2 LEDs.

Please avoid looking directly at the beam as it may cause

severe eye injuries.

Evora-SP60 - 60W LED compact moving head with motorized focus and prisms

Page 4

English

2 - Introduction

3 - Technical specifications

4 - Description

Thank you for purchasing the Evora-SP60 moving head. You now have in your possession a high-quality,

powerful and intelligent device absolutely perfect for parties, animations, live events...

• Light source: 60W LED

• Advanced LED technology ( lifespan of 100.000 hours)

• Low temperature, low power consumption and works many hours non-stop

• Beamwidth: 15° - 1970 Lux at 5 m

• 1 Colour wheel with 8 dichroic colours+open

• Rotating gobos wheel: 7 rotating gobos (4 metal gobos and 3 dichroic gobos)

• 2 Prisms: 3-facet and 3D

• Frost filter

• Electronic dimming from 0 - 100%

• Motorized focus

• Gobos indexing

• 7 built-in programs accessible from the DMX

• Pulse and Strobe effects

• Modes : - DMX - Master/Slave - Music-sensitive

• Built-in musical programs

• Automatic detection of the DMX, slave or master mode

• LED display with drop-down menu to assign and choose the different modes

• 14 DMX channels (Colours / Rotating gobos / Gobos rotation / Movements speed / PAN / TILT / Prisms /

Prisms indexing / Focus/ Shutter ad Strobe / Dimmer / Reset and Built-in programs / 16-bit PAN / 16-bit

TILT

• Position memory

• Stepper motor

• Forced ventilation system

• Power consumption: 140W max.

• Power supply: 100/240V, AC - 50/60Hz

• Net weight: 9 kg

NOTE : The internal software can be updated via the DMX input and very specific tools.

1 - Lens

2 - Display

Allows you to visualise menus.

9 - MODE/ESC button

Enters/leaves menus.

Allows you to browse through menus and change

values.

4 - UP button

Allow you to browse through menus and change values.

5 - DOWN button

Allow you to browse through menus and change values.

6 - ENTER

Allows you to select a function and save changes.

7 - Micro

Used for music-sensitive modes.

8 -Transport handle

Evora-SP60 - 60W LED compact moving head with motorized focus and prisms

Page 5

English

9 - DMX output via 3-pin XLR

10 - DMX input via 3-pin XLR

11 - DMX output via 5-pin XLR

12 - DMX input via 5-pin XLR

13 - Power switch

14 - Fuse

Fuse : 3.15A - 250V ; 5 x 20 mm

15 - Power input

1 : Hook supports

2 : Hook

3 : Safety cable

(The current legislation requires a double holding system for any device used in public places. This

system must bear at lost 10 time the weight of the device. This means the Evora-180SP safety wire must

be able to bear approximately 90 kg).

4 : Quick-Lock wing nuts

The Evora-SP60 moving head is supplied

with two Quick-Lock fastening systems.

The example above indicates how to

install the Omega holders.

1 - Attach Omega holders or hook

clamps to the Quick-Lock systems.

2 - Position your Omega - Quick-Lock

systems on top of the drilled holes

located below the Evora-180SP.

3 - Rotate the Quick-Lock wing nuts a

quarter turn.

CAUTION!

Please make sure to

properly tighten the

fixation system.

Using a safety cable

is mandatory.

5 - Installing Quick-Lock fastening systems

Evora-SP60 - 60W LED compact moving head with motorized focus and prisms

Page 6

English

6 - Cabling, addressing and daisy chaining

Connecting the DMX remote control :

Connect the female plug of your XLR cable to your DMX remote control XLR output, then connect your cable

male output to the moving head. Daisy chain your moving heads with XLR cables.

120 Ω 1/4W

Using a DMX line termination :

When long runs of cable are used (more than 100m), you may need to use a terminator

on the last unit to avoid erratic behavior. A terminator is a 110-120 ohm 1/4 watt resistor

which is connected between pins 2 and 3 of a male XLR connector. This unit is inserted

in the female XLR connector of the last unit in your daisy chain to terminate the line.

Adressing the units :

Every unit must have a DMX address in order to respond to DMX signals. The address corresponds to the

channel number on which the unit receives an incoming DMX signal sent by the DMX remote control. The

DMX addressing can be performed by programming the channel number via the display located on the base of

the unit.

You can either assign the same address to your units so they all react to the same signal, or assign a unique

address per unit to control them independently.

In the example above, the Evora-SP60 uses 14 channels.

You must skip 14 channels between each address you assign.

he address of the first unit will be 1, the second unit will be 15 (1+14), the third unit will be 29 (14+15) and so

on.

NB : Once switched on, the Evora-SP60 automatically detects any incoming DMX signal, and the display

indicates"A.001" (the unit DMX address). If the unit does not receive any DMX signal, the display will flash. In

such a case, please make sure the cable is properly plugged into the DMX input of your moving head, your

remote control is switched on and the cables used are not defective.

Address 1

Address 15

Address 29

Remote control

DMX line termination

Evora-SP60 - 60W LED compact moving head with motorized focus and prisms

Page 7

English

7 - Menus

Initial DMX address settings and choice of the operating mode (master or slave)

Initial DMX address settings

Slave mode: the Evora-SP60 reacts to signals of another

Master Evora-SP60.

Launching and choosing how to launch built-in programs

Music-sensitive mode

The program is music-sensitive, either Automatic (AU-A) or as

a Master unit (AU-M).

Automatic music-sensitive mode

The program is music-sensitive, either Automatic (SO-A) or as

a Master unit (SO-M).

Configuration of the DMX address via a controller.

You will be able to address your Evora-SP60 via a DMX controller once this function has been activated (ON).

The channel 1 of the controller must be set to "7".

The channel 2 of the controller must be set to "7" for any address between 1 and 255, and to "8" for addresses

between 256 and 512. When channel 2 is to 8, the counting starts from 256.

Channel 3 determines the address:

Address 57 = channel 1 set to 7, channel 2 set to 7 and channel 3 set to 57.

Address 420 = channel 1 set to 7, channel 2 set to 8 and channel 3 set to 164 ; (256 + 164 = 420).

You now only need to wait about 20 secondes before the Evora-SP60 resets to apply the changes.

This menu allows you to set the initial DMX address, choose the operating mode and configure the

behaviour of the projector.

The Evora-SP60 features many menus allowing you to configure its every move and function.

Press MODE / ESC to access the main menu.

Use the navigation keys to browse through submenus. Then press ENTER to access a submenu.

Use the and navigation keys to change values.

Press ENTER to save changes.

Press MODE /ESC again to leave a submenu.

Please note : Grayed values are the default values.

7.1 MODE menu

Evora-SP60 - 60W LED compact moving head with motorized focus and prisms

Page 8

English

Allows you to configure the movements of the Evora-SP60 and access its programs settings.

Reverses the PAN movements.

Reverses the TILT movements.

16-bit mode activation : The Evora-SP60 has 2 extra

channels for 16 bits settings: Precise PAN settings

and Precise TILT settings.

Displays the DMX value of each channel

Inverts the display (180°)

Displaying DMX values and inverting the display

The display automatically shuts off

Configures the sensitivity of the internal mic (with

the UP and DOWN buttons) for music-sensitive

programs.

Determines the PAN movement range (in degrees).

Determines the behaviour of the

projector in case of interruption of

the DMX signal

CLOS = Shutter closed

HOLD = The projector holds onto the last information received

AUTO = The projector activates the Music-sensitive mode for built-in programs

AUDI = Switches to Automatic Music-sensitive mode

Resets the motors

Resets the unit to factory settings.

Caution ! User changes and programs will be lost.

AUTO : The Evora-SP60 automatically regulates its temperature.

HIGH : Ventilation at full power.

LOW : Ventilation at minimum power.

7.2 SET menu

Locks the keyboard

There are 2 ways to unlock the keyboard:

1 - When the Evora-SP60 is switched on again

2 - By pressing 3 seconds the MENU button

Configuration of the cooling system.

Evora-SP60 - 60W LED compact moving head with motorized focus and prisms

Page 9

English

Displays the current version of the internal software

Time before the motors and LED shuts down in

case of DMX signal interruption

From 1 to 99 minutes

This function can be deactivated by choosing "OFF".

7.2 SET menu (continuation)

Allows you to lock the device to be able to configure the focus and test each channel

Tests the channels. Select a channel (values 01 to 11

corresponds to channels) and press ENTER to launch the test.

Focus configuration: When this function is activated, the

Evora-SP60 is positioned at 90° to configure the focus.

Motors calibration: Allows you to position very precisely some

of the motors of the Evora-SP60. A password is required to

access these settings: C050.

This menu allows you to check on the operating time of your device.

Operating time (in hours).

7.3 ADJU menu

7.4 TIME menu

Colour wheel calibration: The range of values

goes from -128 to 127.

Prism calibration: The range of values goes from

-128 to 127.

Prism indexing calibration: The range of values

goes from -128 to 127.

Gobo wheel calibration: The range of values

goes from -128 to 127.

PAN calibration: The range of values goes from

-128 to 127.

TILT calibration: The range of values goes from

-128 to 127.

Evora-SP60 - 60W LED compact moving head with motorized focus and prisms

Page 10

English

Allows you to edit the internal sequence launched by the RUN command from the MODE menu.

Number of scenes included in the sequence. 48 scenes max. If the

value is S-07, the sequence will include 7 scenes.

Allows you to automatically save the number of scenes. The numbers

following RE indicate the position of the current step.

First scene of the sequence

Edit each channel of the current scene. Each submenu

allows you to edit a channel.

For instance: To edit channel 5 you will select C-05, and

confirm with ENTER. The display will then indicate 05-

XX, XX being the hexadecimal DMX value.

Change this value with the UP and DOWN buttons.

Confirm your choice with ENTER and move onto the

next channel.

You must confirm your choice for each channel before

moving onto next settings.

Configures the current scene duration from 0,2 to

199,8 ms (001 to 999 x 0.2 ms)

Allows you to retrieve scenes from an external

controller.

(see below for more details)

Last scene of the sequence

Note: The number of the last scene is the value selected in the STEP submenu.

Retrieving scenes from an external controller

1 - Connect the controller to the Evora-SP60.

2 - Select the desired scene.

3 -Position the STEP submenu on SC-01, confirm with ENTER. The display will indicate C-O1.

4 -Select CNIN and confirm with ENTER, the display will indicate SC-O2 if the scene has been saved

properly.

5 - Set the scene duration with the TIME submenu.

6 - Move onto the next scene.

7 - Repeat steps 3 to 5 for each scene. The number of scenes is determined by the value chose in

the STEP submenu.

Note : The controller only acts on the memory of the projector, not on its movements.

Switch to RUN mode to visualise saved scenes (see page 7).

7.5 EDIT menu

Evora-SP60 - 60W LED compact moving head with motorized focus and prisms

Page 11

English

CHANNEL 1: Colour wheel

000 - 014 Open / White

015 - 029 Colour 1 = Light Green

030 - 044 Colour 2 = Blue

045 - 059 Colour 3 = Green

060 - 074 Colour 4 = Yellow

075 - 089 Colour 5 = Magenta

090 - 104 Colour 6 = Orange

105 - 119 Colour 7 = Sky Blue

120 - 127 Colour 8 = Pink

128 - 189 Clockwise rainbow effect: from fast to slow

190 - 193 No rotation

194 - 255 Counterclockwise rainbow effect: from slow to fast

CHANNEL 2: Rotating gobo wheel

000 - 009 Open

010 - 019 Rotating gobo 1

020 - 029 Rotating gobo 2

030 - 039 Rotating gobo 3

040 - 049 Rotating gobo 4

050 - 059 Rotating gobo 5

060 - 069 Rotating gobo 6

070 - 079 Rotating gobo 7

080 - 095 Gobo 1 Shake effect

096 - 111 Gobo 2 Shake effect

112 - 127 Gobo 3 Shake effect

128 - 143 Gobo 4 Shake effect

144 - 159 Gobo 5 Shake effect

160 - 175 Gobo 6 Shake effect

176 - 191 Gobo 7 Shake effect

192 - 255 Clockwise rainbow effect: from fast to slow

8 - DMX channels and their functions

Evora-SP60 - 60W LED compact moving head with motorized focus and prisms

Page 12

English

CHANNEL 3: Gobos rotation and indexation

000 - 127 Gobos indexation

128 - 189 Clockwise gobos rotation: from fast to slow

190 - 193 No rotation

194 - 255 Counterclockwise gobos rotation: from slow to fast

CHANNEL 4: PAN and TILT movements speed

000 - 225 Increasing speed

226 - 235 Black-out during movements

236 - 245 Black-out during gobos and colours changes

246 - 255 No function

CHANNEL 5: PAN Movement

000 - 255 PAN movements on a 630° or 540° angle according to the mode selected

via the option from the menu (refer to paragraph 7.2).

CHANNEL 6: TILT Movement

000 - 255 TILT movement on a 270° angle

Evora-SP60 - 60W LED compact moving head with motorized focus and prisms

Page 13

English

CHANNEL 9 : Focus

000 - 255 Sharpness settings

CHANNEL 7 : 3-facet rotating prism, 3D prism / Gobo macros

000 - 031 Open

032 - 063 3-facet prism

064 - 095 3D prism

096 - 127 Frost

128 - 135 Macro 1

136 - 143 Macro 2

144 - 151 Macro 3

152 - 159 Macro 4

160 - 167 Macro 5

168 - 175 Macro 6

176 - 183 Macro 7

184 - 191 Macro 8

192 - 199 Macro 9

200 - 207 Macro 10

208 - 215 Macro 11

216 - 223 Macro 12

224 - 231 Macro 13

232 - 239 Macro 14

240 - 247 Macro 15

248 - 255 Macro 16

CHANNEL 8: Prisms rotation and indexations

000 - 127 Prisms indexation

128 - 189 Clockwise, fast to slow prisms rotation

190 - 193 No rotation

194 - 255 Counterclockwise, slow to fast prisms rotation

Evora-SP60 - 60W LED compact moving head with motorized focus and prisms

Page 14

English

CHANNEL 11: Dimmer

000 - 255 Intensity settings from 0 - 100%

CHANNEL 10: Shutter and Strobe

000 - 031 LED off

032 - 063 LED on

064 - 095 Slow to fast strobe effect

096 - 127 LED on

128 - 159 Pulse effect

160 - 191 LED on

192 - 223 Slow to fast random strobe effect

224 - 255 LED on

CHANNEL 12: Reset and Built-in programs

000 - 019 Regular colour changes (the wheel stops during each colour)

020 - 029 Linear colour changes

030 - 039 Linear colour and gobo changes

040 - 079 No function

080 - 084 Resets all motors

085 - 087 Resets movement motors

088 - 090 Resets colour wheel

091 - 093 Resets gobo wheel

094 - 096 No function

097- 099 Resets other motors

100 - 119 Built-in program 1

120 - 139 Built-in program 2

140 - 159 Built-in program 3

160 - 179 Built-in program 4

180 - 199 Built-in program 5

200 - 219 Built-in program 6

220 - 239 Built-in program 7

240 - 255 Music-sensitive mode

Evora-SP60 - 60W LED compact moving head with motorized focus and prisms

Page 15

English

9.2 Gobos size

The Evora-SP60 features interchangeable gobos

allow you to customise the beam of the projector.

You will be required to indicate several parameters

in order to create custom-made gobos fitting both

the Evora-SP60 and your needs:

- The first parameter is the gobo size. The Evora-

SP60 uses gobos with an external diameter of

27mm.

- The second parameter is the size of the picture

area (where the pattern will be drawn). This zone

cannot exceed a 25mm diameter.

- The third parameter is about the material used

to create a new gobo. Metal gobos are perfect

for basic patterns, such as the ones supplied

with the moving head. More complex patterns

(companies logos or precise drawings) will require

glass gobos.

-The last criteria is the gobo depth: it must NOT exceed 2 mm.

9.1Gobos

Picture area

2 max.

Gobo 1 Gobo 2 Gobo 3 Gobo 4 Gobo 5 Gobo 6 Gobo 7

Rotating

Gobo

* You can access the 16-bit mode via the function of the menu (see paragraphe 7.2).

CHANNEL 13: 16-bit* PAN movement

000 - 255 Precise PAN movement settings

CHANNEL 14: 16-bit* TILT movement

000 - 255 Precise TILT movement settings

9 - Colours and interchangeable gobos

Evora-SP60 - 60W LED compact moving head with motorized focus and prisms

Page 16

English

9.3 Replacing gobos

Each gobo is embedded into a

support.

Each support can be

disassembled for easier gobo

replacements.

To dissassemble a gobo

support, push the support

toward the back of the weel,

then pull it out.

Gobos are maintained by a clip.

Remove this clip to extract the

gobo.

Proceed in reverse order to

reassemble.

9.3 Colours

Colour 1

Light green Colour 2

Blue Colour 3

Green Colour 4

Yellow Colour 5

Magenta Colour 6

Orange Colour 7

Light blue Colour 8

Pink

Dichro

Ref.

E-COLOUR

® ROSCO®

Tarragon

#5455

Moonlight Blue

#183

Dark Yellow

Green #090 Yellow #101 Special Rose

Pink #332

Sunset Red

#025

Full CTB

#201 Flesh Pink

Evora-SP60 - 60W LED compact moving head with motorized focus and prisms

Page 17

English

Once switched on the unit will launch an initialisation. The display will indicate "XXEr" if a problem occurs

with one or several channels. If a problem occurs on channel 1 the display will indicate « 01Er » , « 02Er »

for channel 2, and so on.

If you encounter problems with channel 1, 2 and 5, the following message will be indicated: « 01Er »,

« 02Er », « 05Er ». It will flash 5 times. The device will then reset and all motors will go back to their initial

position. If the message keeps ocurring after 3 resets, there are more than 3 errors. The channels cannot

operate properly if there are more than 3 errors. If less than 3 errors, the concerned channels will be

deactivated but the projector can be operated.

: Colour wheel error.

This message appears after the initialisation of the unit if the magnetic position sensor of the colour wheel

is defective or misplaced.

: Gobo wheel error.

This message appears after the initialisation of the unit if the magnetic position sensor of the gobo wheel

is defective or misplaced.

: Gobos indexation error.

This message appears after the initialisation of the unit if the magnetic position sensor of the gobo

indexation is defective or misplaced.

: PAN (yoke) movement error.

This message appears after the initialisation of the unit if the magnetic position sensor of the PAN

movement is defective or misplaced.

: TILT (head) movement error.

This message appears after the initialisation of the unit if the magnetic position sensor of the TILT

movement is defective or misplaced.

: Error on the prism channel.

This message appears after the initialisation of the unit if the magnetic position sensor of the prism is

defective or misplaced.

: Error on the focus channel.

This message appears after the initialisation of the unit if the the magnetic position sensor of the prism is

defective or misplaced.

Errors may have various origins. Sensors are used to set the motors in their default position.

Either the magnetic sensors are defective, or the magnets have been displaced.

Problems might also come from a defective motor or the motor electronic management.

In any case, please write down the error displayed and contact your retailer to launch a maintenance

procedure.

Do NOT attempt to repair it by yourself as only Contest-approved technicians are allowed to perform

maintenance operations.

10 - Error messages

Evora-SP60 - 60W LED compact moving head with motorized focus and prisms

Page 18

English

Distance (m)

Intensity (lux) 7350 1970 1130

Beam Opening = 15°

Diameter (m) Ø 0,63

2,5 Ø 1,20

5Ø 1,55

6,5

15°

11 - Beamwidth and light output

12 - Dimensions

Evora-SP60 - 60W LED compact moving head with motorized focus and prisms

Page 19

English

13 - Notes

Because CONTEST® takes the utmost care in its products to make sure you only get the best possible quality, our products are

subjects to modifications without prior notice. That is why technical specifications and the products physical configuration might differ

from the illustrations.

Make sure you get the latest news and updates about the CONTEST® products on www.contest-lighting.com

CONTEST® is a trademark of HITMUSIC S.A. - Zone Cahors sud - 46230 FONTANES - FRANCE

Contest Evora SP60 User manual

Brand: Contest

Model: Evora SP60

Category: Floodlights

Type: User manual

This manual is also suitable for

Evora-SP60

Download PDF

report

Contest Evora SP60 User manual

This manual is also suitable for

Contest Evora SP60 User manual

Related papers

Other documents