2. Rhino Rack
  3. S550

Rhino Rack S550 Operating instructions

  • Hello! I've reviewed the instructions for the RHINO-RACK S550 35mm Wrap Around Riser. This document details the steps for installing the risers, including the removal of the nuts, correct direction for installation and maximum carrying capacity. I'm ready to answer any questions you might have about the installation process or the device itself.
  • What is the first step in installing the Rhino wrap around riser?
    In which direction should the risers be turned to install them?
    What is the maximum carrying capacity?
    What should be noticed about T slots?
Page 1 of 2
Install the Rhino wrap around riser’s by turning
them in a clockwise direction. Make sure the
T slots at the top of the riser’s are facing each
other when tight.
2
Turn the short wrap around nuts anti-clockwise
by hand to remove.
1
Maximum carrying capacity: 35kg
S550 35mm Rhino Wrap Around Riser
Place these instructions in the vehicle’s glove box after installation is complete.
Important: Please read these instructions carefully prior to installation.
Please refer to your fi tting instruction to ensure that the roof racks are installed in the
correct locations.
Check the contents of kit before commencing fi tment and report any discrepancies
/