Sound Choice PCK-350 DR User manual

USB

DVD

C +GD

POG AMR R

1234567890

PWER

MUSI C VOLMUSI C VOL

C 1 MIC2

MIC 1 VO L MIC 2 VO LECHO

TAPE

AUXDV D /B C

P A KON VIDE OLR

AUX IN PUT

AUX

DVD

TAPE

P/B CKA

iPod

nOnO Of

fOf

BALA NCE

iPod

O B

D L Y

D I G I T L

IGIT A D

D AL U IO

P CGRA HIS

N UI P T

PCK-350 DR

USER'S MANUAL

ALL-IN-ONE MUSIC SYSTEM

N eALL-in-O E Music Syst m

PCK-350 DR

Before operating this unit, please read this user's

manual completely and keep this manual for future reference.

Sound Choice® Accompaniment Tracks are arranged and produced to duplicate the

original hit recordings – both with and without the lead vocals! All songs are

recorded by our studio musicians in the same key and tempo as the original artist.

Songs include background vocals if found on the original recording.

Sound Choice songs are available on compact disc plus graphics (CDG) and as

digital downloads from various sites around the world. Visit www.soundchoice.com

and look for the music downloads link.

www.soundchoice.com

Also available are the Pro Mic 12 and Padded Carrying Bag for the PCK 350 DR.

Padded Carrying Bag for PCK 350 DR

Protect your investment with this attractive and

functional carrying bag for your PCK 350 DR. Made of

durable woven nylon fabric it has a padded front and a

large pocket in the back to hold your microphones,

cables, power cord and music. During storage and

transportation, the fabric keeps out dust, helps repel

moisture and resists scuffing, helping to keep your

player in top condition.

PRO MIC 12 with 10' Cable

Don't sing alone! Add a second or third matching

microphone that came with your PCK 350 DR

• Vocal Quality Dynamic Microphone

• Value Priced

• Extremely Durable Zinc Diecast Metal Body

• Unidirectional Pattern

• 10-Foot Detachable Mic Cable

• On/Off Switch

To sign up for our new release newsletter, browse new

releases or order additional products, go to:

Warnings, Cautions and Others-----------------------------------Warnings, Cautions and Others-----------------------------------

Controls and Functions----------------------------------------------Controls and Functions----------------------------------------------

Play Modes-------------------------------------------------------------Play Modes-------------------------------------------------------------

Functions and Operations-------------------------------------------Functions and Operations-------------------------------------------

Setup -------------------------------------------------------------------Setup -------------------------------------------------------------------

Specifications --------------------------------------------------------Specifications --------------------------------------------------------

Troubleshooting -----------------------------------------------------Troubleshooting -----------------------------------------------------

1717

1818

2323

2626

2727

Brief Introduction----------------------------------------------------- 14Brief Introduction----------------------------------------------------- 14

USB/Memory Card Operation---------------------------------------15USB/Memory Card Operation---------------------------------------15

MP3 Player or iPod Playback ------------------------------------- 16MP3 Player or iPod Playback ------------------------------------- 16

www.soundchoice.com

To sign up for our new release newsletter, browse new

releases or order additional products, go to:

For Canada/Pour le Canada

THIS DIGITAL APPARATUS DOES NOT EXCEED

THE CLASS B LIMITS FOR RADIO NOISE

EMISSIONS FORM DIGITAL APPARATUS AS SET

OUT IN THE INTERFERENCE-CAUSING

EQUIPMENT STANDARD ENTITLED DIGITAL

APPARATUS, ICES-003 OF THE DEPARTMENT

OF COMMUNICATIONS. CET APPAREIL

NUMERIQUE RESPECTE LES LIMITES DE

BRUITS RADIO ELECTRIQUES APPLICABLES

AUX APPAREILS NUMERIQUES DE CLASSE B

PRESCRITES DANS LA NORMESUR LE

MATERIEL BROUILLEUR: APPAREILS

NUMERIQUES , NMB-003 EDICTEE PAR LE

MINISTRE DES COMMUNICATIONS.

For Canada/Pour le Canada

THIS DIGITAL APPARATUS DOES NOT EXCEED

THE CLASS B LIMITS FOR RADIO NOISE

EMISSIONS FORM DIGITAL APPARATUS AS SET

OUT IN THE INTERFERENCE-CAUSING

EQUIPMENT STANDARD ENTITLED DIGITAL

APPARATUS, ICES-003 OF THE DEPARTMENT

OF COMMUNICATIONS. CET APPAREIL

NUMERIQUE RESPECTE LES LIMITES DE

BRUITS RADIO ELECTRIQUES APPLICABLES

AUX APPAREILS NUMERIQUES DE CLASSE B

PRESCRITES DANS LA NORMESUR LE

MATERIEL BROUILLEUR: APPAREILS

NUMERIQUES , NMB-003 EDICTEE PAR LE

MINISTRE DES COMMUNICATIONS.

" "

Caution

Disconnect the mains plug to shut the power off

completely. The POWER is not disconnected from

the mains line when the POWER button on the front

panel is pressed in.

Caution

Disconnect the mains plug to shut the power off

completely. The POWER is not disconnected from

the mains line when the POWER button on the front

panel is pressed in.

1. CLASS1 LASER PRODUCT

2. DANGER: Visible laser radiation when open and

interlock failed or defeated. Avoid direct exposure

to beam.

3. CAUTION: Do not open the top cover. There are

no user service able parts inside the unit. Leave

all servicing to qualified service personnel.

4. REPRODUCTION OF LABEL: CAUTION LABEL,

PLACED INSIDE THE UNIT.

1. CLASS1 LASER PRODUCT

2. DANGER: Visible laser radiation when open and

interlock failed or defeated. Avoid direct exposure

to beam.

3. CAUTION: Do not open the top cover. There are

no user service able parts inside the unit. Leave

all servicing to qualified service personnel.

4. REPRODUCTION OF LABEL: CAUTION LABEL,

PLACED INSIDE THE UNIT.

IMPORTANT FOR LASER PODUCTSIMPORTANT FOR LASER PODUCTS

For Canada/Pour le Canada

CAUTION: TO PREVENT ELECTRIC SHOCK,

MATCH WIDE BLADE OF PLUG TO WIDE

SLOT,AND FULLY INSERT.

ATTENTION: POUR EVITER LES CHOCS

ELECTRIQUES, INTRODUIRE LA LAME LA PLUS

LARGE DE LA FICHE DANS LA BORNE

CORRESPONDANTE DE LA PRISE ET POUSSER

JUSQUAU FOND.

For Canada/Pour le Canada

CAUTION: TO PREVENT ELECTRIC SHOCK,

MATCH WIDE BLADE OF PLUG TO WIDE

SLOT,AND FULLY INSERT.

POUR EVITER LES CHOCS

ELECTRIQUES, INTRODUIRE LA LAME LA PLUS

LARGE DE LA FICHE DANS LA BORNE

CORRESPONDANTE DE LA PRISE ET POUSSER

JUSQUAU FOND.

ATTENTION:

PRODUCT COMPLIES WITH DHHS RULE 21

CFR SUB. CHAPTER J IN EFFECT AT DATE OF

MANUFACTURE.

COMPLIES WITH DHHS RADIATION

PERFORMANCE STANDARDS, 21 CFR SUB.

CHAPTER J.

PRODUCT COMPLIES WITH DHHS RULE 21

CFR SUB. CHAPTER J IN EFFECT AT DATE OF

MANUFACTURE.

COMPLIES WITH DHHS RADIATION

PERFORMANCE STANDARDS, 21 CFR SUB.

CHAPTER J.

CERTIFICATION:

THIS PRODUCT COMPLIES WITH FDA RADIATION

PERFORMANCE STANDARD, 21 CFR SUB.CHAPTER J.

CERTIFICATION:

THIS PRODUCT COMPLIES WITH FDA RADIATION

PERFORMANCE STANDARD, 21 CFR SUB.CHAPTER J.

1.This equipment has been tested and found to

comply with the limits for a Class B digital device,

pursuant to part 15 of the FCC Rules. These

limits are designed to provide reasonable

protection against harmful interference in a

residential installation.

This equipment generates, uses and can radiate

radio frequency energy and, if not installed and

used in accordance with the instructions, may

cause harmful interference to radio

communications. However, there is no guarantee

that interference will not occur in a particular

installation. If this equipment does cause harmful

interference to radio or television reception,

which can be determined by turning the

equipment off and on, the user is encouraged to

try to correct the interference by one or more of

the following measures:

*Reorient or relocate the receiving antenna.

*Increase the separation between the equipment

and receiver.

*Connect the equipment into an outlet on a circuit

different from that to which the receiver is

connected. Consult the dealer or an experienced

radio/TV technician for help.

1.This equipment has been tested and found to

comply with the limits for a Class B digital device,

pursuant to part 15 of the FCC Rules. These

limits are designed to provide reasonable

protection against harmful interference in a

residential installation.

This equipment generates, uses and can radiate

radio frequency energy and, if not installed and

used in accordance with the instructions, may

cause harmful interference to radio

communications. However, there is no guarantee

that interference will not occur in a particular

installation. If this equipment does cause harmful

interference to radio or television reception,

which can be determined by turning the

equipment off and on, the user is encouraged to

try to correct the interference by one or more of

the following measures:

*Reorient or relocate the receiving antenna.

*Increase the separation between the equipment

and receiver.

*Connect the equipment into an outlet on a circuit

different from that to which the receiver is

connected. Consult the dealer or an experienced

radio/TV technician for help.

2.IMPORTANT: When connecting this product to

accessories and/or another product use only

high quality shielded cables. Cable(s) supplied

with this product MUST be used. Follow all

installation instructions. Failure to follow

instructions could void your FCC authorization to

use product in the U. S. A.

2.IMPORTANT: When connecting this product to

accessories and/or another product use only

high quality shielded cables. Cable(s) supplied

with this product MUST be used. Follow all

installation instructions. Failure to follow

instructions could void your FCC authorization to

use product in the U. S. A.

FCC INFORMATION (U.S.A.)FCC INFORMATION (U.S.A.)

The lightning flash with arrowhead symbol, within an

equilateral triangle is intended to alert the user to the

presence of uninsulated dangerous voltage within the

product's enclosure that may be of sufficient magnitude

to constitute a risk of electric shock to persons.

The lightning flash with arrowhead symbol, within an

equilateral triangle is intended to alert the user to the

presence of uninsulated dangerous voltage within the

product's enclosure that may be of sufficient magnitude

to constitute a risk of electric shock to persons.

RISK OF ELECTRIC SHOCK

DO NOT OPEN

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTIONCAUTION

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK.

DO NOT REMOVE COVER (OR BACK).

NO USER SERVICEABLE PARTS INSIDE.

REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK.

DO NOT REMOVE COVER (OR BACK).

NO USER SERVICEABLE PARTS INSIDE.

REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

WARNING

To reduce the risk of fire or electrical shock, do not

expose this appliance to rain or moisture.

WARNING

To reduce the risk of fire or electrical shock, do not

expose this appliance to rain or moisture.

WARNINGS, CAUTIONS AND OTHERSWARNINGS, CAUTIONS AND OTHERS

The exclamation point within an equilateral triangle is

intended to alert the user to the presence of important

operating and maintenance (servicing) instructions in

the literature accompanying the appliance.

The exclamation point within an equilateral triangle is

intended to alert the user to the presence of important

operating and maintenance (servicing) instructions in

the literature accompanying the appliance.

Mises en garde, precautions et indications diversesMises en garde, precautions et indications diverses

2. Retain Instructions

The safety and operating instructions should be retained

for future reference. We also recommend you keep all

packing material and boxes in the event you have to ship

your unit in to a repair center.

2. Retain Instructions

The safety and operating instructions should be retained

for future reference. We also recommend you keep all

packing material and boxes in the event you have to ship

your unit in to a repair center.

Before using the unit, be sure to read all operating instructions carefully. Please note that

these are general precautions and may pertain to more than your unit.

Before using the unit, be sure to read all operating instructions carefully. Please note that

these are general precautions and may pertain to more than your unit.

1. Read Instructions

All the safety and operating instructions should be read

before the product is operated.

1. Read Instructions

All the safety and operating instructions should be read

before the product is operated.

3. Heed Warnings

All warnings on the product and in the operating

instructions should be adhered to.

3. Heed Warnings

All warnings on the product and in the operating

instructions should be adhered to.

4. Follow Instructions

All operating and use instructions should be followed.

4. Follow Instructions

All operating and use instructions should be followed.

5. Attachments

Do not use attachments not recommended by the

product manufacturer as they may cause hazards.

5. Attachments

Do not use attachments not recommended by the

product manufacturer as they may cause hazards.

6. Cleaning

Unplug this product from the wall outlet before cleaning.

Do not use liquid cleaners or aerosol cleaners. Use a dry

cloth for cleaning.

6. Cleaning

Unplug this product from the wall outlet before cleaning.

Do not use liquid cleaners or aerosol cleaners. Use a dry

cloth for cleaning.

8. Heat

The appliance should be situated away from heat

sources such as radiators, heat register, stoves, or other

apparatus (including amplifiers) that produce heat.

8. Heat

The appliance should be situated away from heat

sources such as radiators, heat register, stoves, or other

apparatus (including amplifiers) that produce heat.

9. Water and Moisture

Do not use this unit near water. For example, near a

bathtub or in a wet basement and the like.

9. Water and Moisture

Do not use this unit near water. For example, near a

bathtub or in a wet basement and the like.

10. Power-cord Protection

Power-supply cords should be routed so that they are

not likely to be walked on or pinched by items placed

upon or against them, paying particular attention to

cords at plugs, convenience receptacles, and point

where they exit from the appliance.

10. Power-cord Protection

Power-supply cords should be routed so that they are

not likely to be walked on or pinched by items placed

upon or against them, paying particular attention to

cords at plugs, convenience receptacles, and point

where they exit from the appliance.

11. Lightning

To protect your product from a lightning storm, or when it

is left unattended and unused for long periods of time,

unplug it from the wall outlet and disconnect the antenna

or cable system. This will prevent damage to the product

due to lightning and power-line surges.

11. Lightning

To protect your product from a lightning storm, or when it

is left unattended and unused for long periods of time,

unplug it from the wall outlet and disconnect the antenna

or cable system. This will prevent damage to the product

due to lightning and power-line surges.

7. Ventilation

The appliance should be situated so its location does not

interfere with its proper ventilation. For example, the

appliance should not be situated on a bed, sofa, rug, or

similar surface that may block the ventilation slots.

7. Ventilation

The appliance should be situated so its location does not

interfere with its proper ventilation. For example, the

appliance should not be situated on a bed, sofa, rug, or

similar surface that may block the ventilation slots.

12. Carts and Stands

The product should be used only with a cart

or stand that is recommended by the

manufacturer.

12. Carts and Stands

The product should be used only with a cart

or stand that is recommended by the

manufacturer.

12 A. An applicance and cart combination should be moved

with care. Quick stops, excessive force and uneven

surfaces may cause the appliance and cart combination

to overturn.

12 A. An applicance and cart combination should be moved

with care. Quick stops, excessive force and uneven

surfaces may cause the appliance and cart combination

to overturn.

13. Power Sources

product should be operated only from the type of power

source indicated on the marking label. If you are not

sure of the type of power supply to your home, consult

your product dealer or local power company.

13. Power Sources

product should be operated only from the type of power

source indicated on the marking label. If you are not

sure of the type of power supply to your home, consult

your product dealer or local power company.

14. Grounding and Polarization

This product is equipped with a polarized alternating-

current line plug (a plug having one blade wider than the

other). This plug will fit into the power outlet only one

way. This is a safety feature. If you are unable to insert

the plug fully into the outlet, try reversing the plug. If the

plug should still fail to fit, contact your electrician to

replace your obsolete outlet. Do not defeat the safety

purpose of the polarized plug.

14. Grounding and Polarization

This product is equipped with a polarized alternating-

current line plug (a plug having one blade wider than the

other). This plug will fit into the power outlet only one

way. This is a safety feature. If you are unable to insert

the plug fully into the outlet, try reversing the plug. If the

plug should still fail to fit, contact your electrician to

replace your obsolete outlet. Do not defeat the safety

purpose of the polarized plug.

15. Power Lines

An outside antenna system should not be located in the

vicinity of overhead power lines or other electric light or

power circuits, or where it can fall into such power lines

or circuits. When installing an outside antenna system,

extreme care should be taken to keep from touching

such power lines or circuits as contact with them might

be fatal.

15. Power Lines

An outside antenna system should not be located in the

vicinity of overhead power lines or other electric light or

power circuits, or where it can fall into such power lines

or circuits. When installing an outside antenna system,

extreme care should be taken to keep from touching

such power lines or circuits as contact with them might

be fatal.

16. Overloading

Do not overload wall outlets, extension cords, or integral

convenience receptacles as this can result in a risk of

fire or electric shock.

16. Overloading

Do not overload wall outlets, extension cords, or integral

convenience receptacles as this can result in a risk of

fire or electric shock.

17. Object and Liquid Entry

Never push objects of any kind into this product through

openings as they may touch dangerous voltage points or

short-out parts that could result in a fire or electric

shock. Never spill liquid of any kind on the product.

17. Object and Liquid Entry

Never push objects of any kind into this product through

openings as they may touch dangerous voltage points or

short-out parts that could result in a fire or electric

shock. Never spill liquid of any kind on the product.

18. Replacement Parts

When replacement parts are required, be sure the

service technician has used replacement parts specified

by the manufacturer or have the same characteristics as

the original part. Unauthorized substitutions may result

in fire, electric shock, or other hazards.

18. Replacement Parts

When replacement parts are required, be sure the

service technician has used replacement parts specified

by the manufacturer or have the same characteristics as

the original part. Unauthorized substitutions may result

in fire, electric shock, or other hazards.

19. Safety Check

Upon completion of any service or repairs to this

product, ask the service technician to perform safety

checks to determine that the product is in proper

operating condition.

19. Safety Check

Upon completion of any service or repairs to this

product, ask the service technician to perform safety

checks to determine that the product is in proper

operating condition.

20. Outdoor Antenna Grounding

If an outside antenna or cable system is connected to the

product, be sure the antenna or cable system is

grounded so as to provide some protection against

voltage surges and built-up static charges. Article 810 of

the National Electrical Code, ANSI/NFPA 70, provides

information with regard to proper grounding of the mast

and supporting structure, grounding of the lead-in wire to

an antenna discharge unit, size of grounding conductors,

location of antenna discharge unit, connection to

grounding electrodes, and requirements for the

grounding electrode. See figure below.

20. Outdoor Antenna Grounding

If an outside antenna or cable system is connected to the

product, be sure the antenna or cable system is

grounded so as to provide some protection against

voltage surges and built-up static charges. Article 810 of

the National Electrical Code, ANSI/NFPA 70, provides

information with regard to proper grounding of the mast

and supporting structure, grounding of the lead-in wire to

an antenna discharge unit, size of grounding conductors,

location of antenna discharge unit, connection to

grounding electrodes, and requirements for the

grounding electrode. See figure below.

SAFETY INSTRUCTIONSSAFETY INSTRUCTIONS

Note to CATV system installer

This reminder is provided to call the CATV system installers attention to Article 820-40

of the NEC that provides guidelines for proper grounding and, in particular, specifies

that the cable ground shall be connected to the grounding system of the building, as

close to the point of cable entry as practical.

Note to CATV system installer

This reminder is provided to call the CATV system installers attention to Article 820-40

of the NEC that provides guidelines for proper grounding and, in particular, specifies

that the cable ground shall be connected to the grounding system of the building, as

close to the point of cable entry as practical.

21. Damage Requiring Service

Unplug this product from the wall outlet and refer

servicing to qualified service personnel under the

following conditions:

A. When the power supply cord or plug is damaged.

B. If liquid has been spilled, or objects have fallen into

the product.

C. If the product has been exposed to rain or water.

D. If the product does not operate normally by following

the operating instructions. Adjust only those controls

that are covered by the operating instructions as an

improper adjustment of other controls may result in

damage and will often require extensive work by a

qualified technician to restore the product to its normal

operation.

E. If the product has been dropped or damaged in any

way.

F. When the product exhibits a distinct change in

performance-this indicates a need for service.

21. Damage Requiring Service

Unplug this product from the wall outlet and refer

servicing to qualified service personnel under the

following conditions:

A. When the power supply cord or plug is damaged.

B. If liquid has been spilled, or objects have fallen into

the product.

C. If the product has been exposed to rain or water.

D. If the product does not operate normally by following

the operating instructions. Adjust only those controls

that are covered by the operating instructions as an

improper adjustment of other controls may result in

damage and will often require extensive work by a

qualified technician to restore the product to its normal

operation.

E. If the product has been dropped or damaged in any

way.

F. When the product exhibits a distinct change in

performance-this indicates a need for service.

22. Servicing

Do not attempt to service it yourself as operating

instructions, do not attempt to service it yourself as

opening or removing covers may expose you to

dangerous voltage or other hazards. Refer all servicing

to qualified service personal.

22. Servicing

Do not attempt to service it yourself as operating

instructions, do not attempt to service it yourself as

opening or removing covers may expose you to

dangerous voltage or other hazards. Refer all servicing

to qualified service personal.

www.soundchoice.com

To sign up for our new release newsletter, browse new

releases or order additional products, go to:

TO OBTAIN SERVICE ON WARRANTY UNITS

Call Sound Choice customer service below for the nearest authorized warranty

service center. If there is no service center near you, then the unit must be sent

prepaid by insured parcel post or UPS to the Sound Choice service center address

nearest you. To establish eligibility for free repair or replacement, YOU MUST

INCLUDE A NOTE EXPLAINING HOW THE UNIT IS DEFECTIVE, a copy of the

original receipt (including the date), your full name, complete mailing address and

telephone number including area code.

North America

Sound Choice

Attn: Service Dept.

14100 South Lakes Drive

Charlotte, NC 28273

USA

Customer Service: 800-788-4487

or 704-583-1616 Ext. 1182

or email us [email protected]

Australia

Sound Choice Distr. (Aust) Pty. Ltd.

Attn: Service Dept.

311 North East Road

Hampstead Gardens, SA 5086

AUSTRALIA

Customer Service: +61 (8) 8261-0566

IF THIS UNIT IS OUTSIDE OF THE WARRANTY PERIOD, please call the

appropriate number below for repair.

Note: The unit must be shipped in the original carton and placed inside

another carton with added padding for extra protection during shipment. All

original accessories including but not limited to cables, remote control,

batteries, owner’s manual, microphone and cable must be included or the

warranty will be voided. If the unit is missing parts when received in our

warehouse you may be charged by Sound Choice for all missing parts.

Limited WarrantyLimited Warranty

www.soundchoice.com

Remote Control FunctionsRemote Control Functions

CONTROLS & FUNCTIONSCONTROLS & FUNCTIONS

ENTER

IPOD CONTROLIPOD CONTROL

EDITEDIT

KEY /CLEA RKEY /CLEA R

VOL+VOL+

VOL -VOL -

RECREC

PCK-350 DRPCK-350 DR

P/BACK

456

Power (Standby)

SD card Mode

Equaliser Adjustment

USB Mode

DVD / Disc mode

Track Selection (Numbers)

DVD Menu

Title Selection

Selection Group (Vol, FF, RW Etc.)

Subtitle On / Off

Angle (Camera Selection)

PBC (Play Back Control)

Return to PBC

Play

Rewind

Key Change

Previous Chapter / track

Open / Close

Karaoke Mode (Single Play Stops After Each Track)

Video Output Mode

Pal / NTSC

Program

Clear Program

Playback Information (on screen)

System Setup

Repeat (One / All etc. )

2 Zoom

33. Audio Settings

Slow

Step

L / R Audio (Multiplex)

Pause

Fast Forward

Adjust Player Volume Output

Next Chapter / track

Stop

Please Note: It is necessary to switch the PBC control to “OFF”

in order to operate the remote control on DVD playback.

To switch between Digital Recorder Playback and all other functions

refer to page 1 for switch location.

Digital Recorder

9. Select tracks to play on Digital Recorder

15 Key / Clear

34.Previous Menu

37.Edit

38.Record

IPOD Playback

16.Mouse (Up and Down)

17.Play / Pause

18.Enter

39.Previous Chapter / Track

40.Previous Menu

41.Next Chapter / Track

Digital Recorder

1.SD/MMC Mini SD (with adaptor) slot.

2.Press for previous track - hold for rewind current track.

3.Menu Select

4.Main power ON light

5.Playback mode light

6.Recording indicator light.

7.Key change

8.Recording

When the yellow (P/Back) light is ON all functions are

available. When it is OFF, you can only record from other

inputs (DVD, Tape, Aux etc.)

Note: Not activated for

Model PCK350 DR

LED Display WindowLED Display Window

Front Panel FunctionsFront Panel Functions

114422335566778899

4343

1. Power ON/OFF

2.DVD/USB switch

3. Eject

11. LEFT/RIGHT channel

12. Numeric keys 0-9

15. CDG disc program

28/29. Play/Pause

30. Stop

34. Previous

35. Next

43. Key control

45. Tray door

46. LED display window

47. Microphone jacks

48. Microphone volume control

50. Function selector

51. Digital Record function

52. Function indicators

53. Music volume control

54. L/R Balance control

55. Echo control knob

56. AUX video input jack

57. AUX audio input jack

58. Cassette door

59. Record for tape

60. Play for tape

61. Fast backward for tape

62. Fast forward for tape

63. Stop/Eject for tape

64. Pause for tape

1. Power ON/OFF

2.DVD/USB switch

3. Eject

11. LEFT/RIGHT channel

12. Numeric keys 0-9

15. CDG disc program

28/29. Play/Pause

30. Stop

34. Previous

35. Next

43. Key control

45. Tray door

46. LED display window

47. Microphone jacks

48. Microphone volume control

50. Function selector

51. Digital Record function

52. Function indicators

53. Music volume control

54. L/R Balance control

55. Echo control knob

56. AUX video input jack

57. AUX audio input jack

58. Cassette door

59. Record for tape

60. Play for tape

61. Fast backward for tape

62. Fast forward for tape

63. Stop/Eject for tape

64. Pause for tape

3434 3030

1111

1212

1515 3535 4646 4545

28/2928/29

5252

5858

5353

5959 6060 6161 6262 6363 6464

4747 4848 51515050 5454 5555 5656 5757

L/R

USB

DVD

CD+G

PROG RAM

12 3 45678 9 00

POWER

MUSIC VOL

MIC 1 MIC 2 MIC 1 V OL MIC 2 VOL ECH O

TAPE

AUX DVD P /BACK ON VID EO L R

AUX I NPUT

AUX

DVD

TAPE

P/BACK

iPod

On Off

BALANCE

iPod

L R

DOLB YDO LBY

D I G I T A LD I G I T A L

DIGITAL AUDIO

GRAPHICS

INPUT

L/R

USB

DVD

CD+G

PROGRAM

12 3 45678 9 0

Musicarrier

POWER

MUSIC VO L

MIC 1 MIC2 MIC 1 VOL MIC 2 VOL ECHO

TAPE

AUX DVD BBE ON VIDEO L R

AUX INPU T

AUX

DVD

TAPE

BBE

iPod

On Off

BALANC E

iPod

L R

ALL- in-ONE M usic S ystem

DOLBY

D I G I T A L

DIGITAL AUDIO

GRAPHICS

INPUT

Rear Panel FunctionsRear Panel Functions

Microphone ConnectionMicrophone Connection

ConnectionConnection

1. 5.1 channel output jacks

2. R.G.B Video output jacks

3. DVD Video output jack

4. 2 channel output jacks

5. Coaxial output jack

6. S-VIDEO output jack

7. Optical output jack

8. Composite video output

9. Composite audio output

10. Power cord connector

11. Power selector

12. Fuse holder

13. Guitar input jacks

14. Guitar volume control

15. Guitar tone control

16. USB jack

17. Memory card slots

18. Rear panel mic input jacks

1. 5.1 channel output jacks

2. R.G.B Video output jacks

3. DVD Video output jack

4. 2 channel output jacks

5. Coaxial output jack

6. S-VIDEO output jack

7. Optical output jack

8. Composite video output

9. Composite audio output

10. Power cord connector

11. Power selector

12. Fuse holder

13. Guitar input jacks

14. Guitar volume control

15. Guitar tone control

16. USB jack

17. Memory card slots

18. Rear panel mic input jacks

There are a total four microphone jacks on the machine,

two in the front panel and two in the back panel.

Plug the microphone cable into a jack.

There are a total four microphone jacks on the machine,

two in the front panel and two in the back panel.

Plug the microphone cable into a jack.

Y/RPB/GPR/B

VIDE O SW FLFR

SLSR

CENCOAXIAL MLMR

S-VI DEOOPTICAL

VIDE O

OUTPUT RL

GUI TAR 1 GUI TAR 2 GUI TAR VOL BASS MID TREB LE MIC 1 MI C 2

SD/MMC

MIN I SD

FUSE 2. 5A/2 50V POW ER SELEC T POW ER INPU T

AC110 V/AC23 0V 50/ 60Hz

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION

DVD FUNC TI ON

OUTPUT

AUD IO OUTPU T

GUI TAR FUNCT ION

DVD FUNC TI ON

6633

1212

2244118899

1818

1717

1616

15151414

1313

1111 1010

Home Theatre ConnectionHome Theatre Connection

FLFL FRFR

CENCEN

SWSW

TVTV

SLSL SRSR

5.1 Channel AV Amplifier5.1 Channel AV Amplifier

Y/RPB/ GPR/B

VIDEO SW FLFR

SLSR

CENCOAXIAL MLMR

S-VI DEOOPTICAL

VIDEO

OUTPUT RL

GUI TAR 1 GUI TAR 2 GUI TAR VOL BAS S MID TREBLE MIC 1 MIC 2

SD/M MC

MINI S D

FUS E 2.5A/ 250V POWER SEL ECT POW ER INP UT

AC110 V/AC23 0V 50/ 60Hz

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION

DVD FU NCTIO N

OUTPUT

AUD IO OUTPUT

GUI TAR FUNCT ION

DVD FU NCTIO N

Y/RPB/GPR/B

VIDEO SW FLFR

SLSR

CENCOAXIAL MLMR

S-VIDEOOPTICAL

VIDEO

OUTPUT RL

GUITAR 1 GUITAR 2 GUITAR VOL BASS MID TREBLE MIC 1 MIC 2

SD/MMC

MINI SD

DVD FUNC TION

OUTPUT

AUDIO OU TPUT

GUITAR FUNCTION

DVD FUNC TION

POWER INPUTPOWER INPUT

AC110V/AC230V 50/60HzAC110V/AC230V 50/60Hz

1. Connect the power cable to the DVD player first.

2. Connect the power plug to the outlet.

1. Connect the power cable to the DVD player first.

2. Connect the power plug to the outlet.

Power Cord ConnectionPower Cord Connection

AC120V/240V

50Hz/60Hz

AC120V/240V

50Hz/60Hz 22

Composite Video Output ConnectionComposite Video Output Connection

TO-TV VIDEO INTO-TV VIDEO IN

NOTE: Check applicable voltage for your country.NOTE: Check applicable voltage for your country.

WARNING: Switch power button to OFF when finished using the machine.

Unplug the power cord if you will not be using the machine for a long time.

WARNING: Switch power button to OFF when finished using the machine.

Unplug the power cord if you will not be using the machine for a long time.

Y/RPB/GPR/B

VIDEO SW FLFR

SLSR

CENCOAXIAL MLMR

S-VIDEOOPTICAL

VIDEO

OUTPUT RL

GUITAR 1 GUITAR 2 GUITAR VOL BASS MID TREBL E MIC 1 MIC 2

SD/MMC

MINI SD

FUSE 2.5A/2 50V POWER SELECT POWER IN PUT

AC110V/AC2 30V 5 0/60Hz

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION

DVD FUNC TION

OUTPUT

AUDIO OUTPUT

GUITAR FUN CTIO N

DVD FUNC TION

Apply Video Cord (the one with yellow head) to connect VIDEO OUT jack on the PCK-350 DR with

VIDEO IN jack on TV.

Apply Video Cord (the one with yellow head) to connect VIDEO OUT jack on the PCK-350 DR with

VIDEO IN jack on TV.

NOTE: This is only applied to a standard TV with AV function while playing disc. NOTE: This is only applied to a standard TV with AV function while playing disc.

TO TV S-VIDEO INTO TV S-VIDEO IN

S-VIDEO ConnectionS-VIDEO Connection

Apply S-VIDEO Cord to connect S-VIDEO OUTPUT jack on PCK 350 DR with S-VIDEO IN jack on TV.

The TV should be set in S-VIDEO mode. Player setting is shown on PAGE 18.

Apply S-VIDEO Cord to connect S-VIDEO OUTPUT jack on PCK 350 DR with S-VIDEO IN jack on TV.

The TV should be set in S-VIDEO mode. Player setting is shown on PAGE 18.

Y.Pb.Pr ConnectionY.Pb.Pr Connection

TO-TV Y.Pb.Pr INTO-TV Y.Pb.Pr IN

TV should be set in Y.Pb.Pr mode. For player setting, please see PAGE 18.TV should be set in Y.Pb.Pr mode. For player setting, please see PAGE 18.

Y/RPB/GPR/B

VIDEO SW FLFR

SLSR

CENCOAXIAL MLMR

S-VIDEOOPTICAL

VIDEO

OUTPUT RL

GUITAR 1 GUITAR 2 GUITAR VOL BASS MID TREBLE MIC 1 MIC 2

SD/MMC

MINI SD

DVD FUNC TION

OUTPUT

AUDIO OU TPUT

GUITAR FUNCTION

DVD FUNC TION

Y/RPB/GPR/B

VIDEO SW FLFR

SLSR

CENCOAXIAL MLMR

S-VIDEOOPTICAL

VIDEO

OUTPUT RL

GUITAR 1 GUITAR 2 GUITAR VOL BASS MID TREBLE MIC 1 MIC 2

SD/MMC

MINI SD

DVD FUNC TION

OUTPUT

AUDIO OU TPUT

GUITAR FUNCTION

DVD FUNC TION

Apply Y.Pb.Pr cords to connect Y.Pb.Pr jacks on Musicarrier with Y.Pb.Pr IN jacks on the TV.Apply Y.Pb.Pr cords to connect Y.Pb.Pr jacks on Musicarrier with Y.Pb.Pr IN jacks on the TV.

TO TV VIDEO INTO TV VIDEO IN

AUX Video Output ConnectionAUX Video Output Connection

AUX In ConnectionAUX In Connection

and video output

from iPod and video output

from iPod

PCK-350 DR play ideo and audio from through s Th F S

must be switched to status

PCK-350 DR play ideo and audio from through s Th F S

must be switched to status 5050

Y/RPB/GPR/B

VIDEO SW FLFR

SLSR

CENCOAXIAL MLMR

S-VIDEOOPTICAL

VIDEO

OUTPUT RL

GUITAR 1 GUITAR 2 GUITAR VOL BASS MID TREBLE MIC 1 MIC 2

SD/MMC

MINI SD

DVD FUNC TION

OUTPUT

AUDIO OU TPUT

GUITAR FUNCTION

DVD FUNC TION

L/R

USB

DVD

CD+G

PROGRA M

12 3 45678 9 0

POWE R

MUSI C VOL

MIC 1 MI C2 MIC 1 VO L MIC 2 VO L ECHO

TAPE

AUX DV D DIGI REC ON VIDE O L R

AUX IN PUT

AUX

DVD

TAPE

REC

iPod

On Off

BALA NCE

iPod

L R

DOLBY

D I G I T A L

DIGITAL AUDIO

GRAPHICS

INPU T

Y/RPB/GPR/B

VIDEO SW FLFR

SLSR

CENCOAXIAL MLMR

S-VIDEOOPTICAL

VIDEO

OUTPUT RL

GUITAR 1 GUITAR 2 GUITAR VOL BASS MID TREBLE MIC 1 MIC 2

SD/MMC

MINI SD

DVD FUNC TION

OUTPUT

AUDIO OU TPUT

GUITAR FUNCTION

DVD FUNC TION

AUDIO CONNECTIONAUDIO CONNECTION

5.1 channel output5.1 channel output

5.1 channel AV amplifier5.1 channel AV amplifier

Stereo outputStereo output

Stereo HIFI amplifierStereo HIFI amplifier

PCK 350 DR PCK 350 DR

Y/RPB/GPR/B

VIDEO SW FLFR

SLSR

CENCOAXIAL MLMR

S-VIDEOOPTICAL

VIDEO

OUTPUT RL

GUITAR 1 GUITAR 2 GUITAR VOL BASS MID TREBLE MIC 1 MIC 2

SD/MMC

MINI SD

DVD FUNC TION

OUTPUT

AUDIO OU TPUT

GUITAR FUNCTION

DVD FUNC TION

Apply a set of cords to connect the FL. FR. SL. SR. CEN and SW jacks on PCK 350 DR with 5.1 channel

amplifier.

Apply a set of cords to connect the FL. FR. SL. SR. CEN and SW jacks on PCK 350 DR with 5.1 channel

amplifier.

Apply Audio Cord (white and red head) to connect AUDIO OUT (ML, MR) jacks on PCK 350 DR with DVD

jacks on HIFI amplifier. Music output only.

Apply Audio Cord (white and red head) to connect AUDIO OUT (ML, MR) jacks on PCK 350 DR with DVD

jacks on HIFI amplifier. Music output only.

Coaxial outputCoaxial output

Apply a Coaxial cord to connect the digital amplifier / decoder with the PCK 350 DR on the COAXIAL jacks.Apply a Coaxial cord to connect the digital amplifier / decoder with the PCK 350 DR on the COAXIAL jacks.

Optical outputOptical output

Apply an Optical cord to connect the digital amplifier / decoder with the PCK 350 DR on OPTICAL jacks.Apply an Optical cord to connect the digital amplifier / decoder with the PCK 350 DR on OPTICAL jacks.

5.1 channel digital amplifier5.1 channel digital amplifier

Y/RPB/GPR/B

VIDEO SW FLFR

SLSR

CENCOAXIAL MLMR

S-VIDEOOPTICAL

VIDEO

OUTPUT RL

GUITAR 1 GUITAR 2 GUITAR VOL BASS MID TREBLE MIC 1 MIC 2

SD/MMC

MINI SD

DVD FUNC TION

OUTPUT

AUDIO OU TPUT

GUITAR FUNCTION

DVD FUNC TION

Y/RPB/GPR/B

VIDEO SW FLFR

SLSR

CENCOAXIAL MLMR

S-VIDEOOPTICAL

VIDEO

OUTPUT RL

GUITAR 1 GUITAR 2 GUITAR VOL BASS MID TREBLE MIC 1 MIC 2

SD/MMC

MINI SD

DVD FUNC TION

OUTPUT

AUDIO OU TPUT

GUITAR FUNCTION

DVD FUNC TION

5.1 channel AV amplifier5.1 channel AV amplifier

AUX Audio Output ConnectionAUX Audio Output Connection

on with Apply RCA mono audio cord for connecting audio

with PCK 350 DR Then y

iPod and

on with Apply RCA mono audio cord for connecting audio

with Then y

PCK 350 DR

iPod and

PCK 350 DRPCK 350 DR

power cord PCK 350 DR with power

PCK 350 DR DV will up

power cord PCK 350 DR with power

PCK 350 DR DV will up

DVD Disc PlaybackDVD Disc Playback

5050

Y/RPB/GPR/B

VIDEO SW FLFR

SLSR

CENCOAXIAL MLMR

S-VIDEOOPTICAL

VIDEO

OUTPUT RL

GUITAR 1 GUITAR 2 GUITAR VOL BASS MID TREBLE MIC 1 MIC 2

SD/MMC

MINI SD

DVD FUNC TION

OUTPUT

AUDIO OU TPUT

GUITAR FUNCTION

DVD FUNC TION

L/R

USB

DVD

CD+G

PROGRAM

12 3 45678 9 0

POWER

MUSIC VO L

MIC 1 MIC2 MIC 1 V OL MIC 2 VOL ECHO

TAPE

AUX DVD P/BACK ON VIDEO L R

AUX INPUT

AUX

DVD

TAPE

BBE

iPod

On Off

BALANCE

iPod

L R

DOLBY

D I G I T A L

DIGITAL AUDIO

GRAPHICS

INPUT

ing your

There is no

when playing s There is no

when playing s 6363

6060

5959 6060

5050

USB/Memory Card OperationUSB/Memory Card Operation

SDSD

MINISDMINISD

L/R

USB

DVD

CD+G

PROGRAM

12 3 45678 9 0

POWER

MUSIC VO L

MIC 1 MIC2 MIC 1 VOL MIC 2 VOL ECHO

TAPE

AUX DVD P/BACK ON VIDEO L R

AUX INPU T

AUX

DVD

TAPE

BBE

iPod

On Off

BALANC E

iPod

L R

DOLBY

D I G I T A L

DIGITAL AUDIO

GRAPHICS

INPUT

Playback method of USB/SD is belowPlayback method of USB/SD is below

1. Right after PCK 350 DR is powered on, the machine will first check if there is a disc in the tray automatically.

If not, it identifies if there is USB device or SD card. If there is USB device or SD card, the system will

show up SMART NAVI screen (see picture 1&2), otherwise it shows NO DISC.

2. When PCK 350 DR is in playback status and you have disc in the tray, and also plug in USB or SD card

simutaneously, you need to choose playing mode manually. First of all, stop the machine, then depress

DVD/USB button in red on the remote. Screen displays three options, DVD DRIVE / USB DRIVE / SD

CARD. (see picture 3). Depress up/ down arrow to select one of them. DVD DRIVE is for disc auto-play.

If no disc in the tray, NO DISC would show on the screen. Select USB DEV or SD CARD, USB and SD

card SMART NAVI (see picture 1&2) shows up.

3. Select the playback file by arrow buttons, then depress ENTER, the machine starts the playback.