QUICK START

GUIDE

NUMARK

DASHBOARD

Installation and Setup

The Numark Dashboard is a class compliant USB plug and play device for Mac

but requires a driver for Windows. Please make sure you have downloaded and

installed the latest Dashboard driver from the Numark website.

NOTE: The Numark Dashboard is an additional controller that will only work in

2. Connect supported Serato DJ hardware to an available USB port.

3. Connect your Dashboard to an available USB Port.

4. Open Serato DJ.

Serato DJ Activation

To nd out how to activate Serato DJ by either starting your free 14 day trial,

or purchasing a license for Serato DJ to use with your supported Serato DJ

device, click here for the most up to date information.

VEIW

1 Deck / Shift Toggle Dashboard deck screen views. Hold SHIFT and press to toggle sorting for the Serato DJ Library.

2 Deck 1/3 Display Displays Serato DJ information for Deck 1/3 (left decks)

3 Library Display Displays Serato DJ library information

4 Deck 2/4 Display Displays Serato DJ information for Deck 2/4 (right decks)

5 View / Sort Toggle Dashboard screen views. Hold SHIFT and press to toggle sorting for the Serato DJ Library.

6 Power On / Off Turn Dashboard Power On/Off

7 Cable lock Used to lock cables so they are not unplugged by force

way to learn the various features of Serato DJ.

Holding the mouse over the button with Tool Tips turned on will show you a list

of all keyboard shortcuts.

For more information about how to use Serato DJ, please go to our website www.

serato.com or refer to the Serato DJ Software Manual. For more information on your

controller, please refer to the hardware manual.

For further help, please contact support@serato.com or go to www.serato.