2. Hornby
  3. R8134 R8135 Gravel Yards

Hornby R8134 R8135 Gravel Yards Owner's manual

  • Hello! I have reviewed the user manual for the HORNBY Timber Yard and Gravel Tipper. This document provides detailed instructions for assembling the components like track, roof, and storage bin, as well as operating the device using a control lever to drop cargo. I'm ready to answer your questions about this product.
  • How to assemble the track?
    How to install the storage bin?
    How to drop cargo into the storage bin?
12V
4/1181A 0405 Printed in China
Hornby Hobbies Ltd., Westwood, Margate, Kent CT9 4JX, United Kingdom
TIMBER YARD / GRAVEL TIPPER
Assembly
1. Locate one short straight track section onto the base between the shed and the
control lever. The four pegs will hold the track in position as shown.
2. Assemble the roof to the shed.
3. Assemble the storage bin, the centre notch to be placed over the control lever and
the slots over the base tabs as indicated.
Operation
1. Place the cargo wagon onto the track so that the side that drops down is facing the
storage bin.
2. Load cargo onto the wagon.
3. By pushing the control lever to the right, the cargo will drop into the bin.
roof
shed
base
tabs control
lever
bin
slot
slot
notch
/