Assembly Procedures:
ADDITIONAL NOTE ABOUT SAFETY:BOLTS MAY LOOSEN DURING NORMAL
EVERYDAY USE, THEY SHOULD BE PREIODICALLY INSPECTED AND RE-
TIGHTENED TO PREVENT DAMAGE OR INJURY. ALWAYS CHECK TO BE SURE
THAT ALL HARDWARE IS KEPT TIGHTENED.
Step 1.Turn the chair upside down and lay on protective carpet ,Open the black fabric of the
bottom,and take out the legs underneath the seat.
Step 2. Attach the chair legs (A、B1、B2) to seat frame, insert the bolts (c) and spring washer(d)
and flat washers (b). Then tighten the bolts with allen wrench (a).
Step 3. Close the black fabric of the bottom, turn the chair over, place the cushion and the pillow on
the chair.
D
E
B1 B2
A
A
a c
c
d
b
d b