Ironton PSS-01 Owner's manual

Brand: Ironton

Model: PSS-01

Type: Owner's manual

Ironton PSS-01 is a pneumatic roller seat with a convenient tool tray and a comfortable padded seat. It is ideal for multitasking craftspeople. The lifting pole allows you to adjust the seat height from 7” to 11-5/8” with the handle. The non-marking wheels make it easy to move around on a smooth, level floor.

Here are some of the things you can do with the Ironton PSS-01:

Use the tool tray to keep your tools and supplies close at hand.
Adjust the seat height to find the most comfortable and efficient working position.
Use the non-marking wheels to move around easily on a variety of surfaces.

Here are some of the things you can do with the Ironton PSS-01:

Use the tool tray to keep your tools and supplies close at hand.
Adjust the seat height to find the most comfortable and efficient working position.
Use the non-marking wheels to move around easily on a variety of surfaces.

PNEUMATIC ROLLER SEAT

ASSEMBLY AND OPERATING INSTRUCTIONS

Read this material before using this product.

Failure to do so can result in serious injury.

SAVE THIS MANUAL.

ITEM NO:17752

Page 2

Speciﬁcations

Save This Manual

You will need the manual for the safety warnings and precautions, assembly

instructions, operating and maintenance procedures, parts list and diagram. Keep

your invoice with this manual. Write the invoice number on the inside of the front

cover. Keep the manual and invoice in a safe and dry place for future reference.

Safety Warnings and Precautions

WARNING: When using product, basic safety precautions should always be

followed to reduce the risk of personal injury and damage to equipment.

Read all instructions before using this product!

1. Keep work area clean. Cluttered areas invite injuries.

2. Keep children away. Children should not be allowed in the work area. This

product is not intended for children.

3. Use the right product for the job. There are certain applications for which

this product was designed. Do not modify this product and do not use this

product for a purpose for which it was not intended.

4. Use eye protection. Always wear ANSI approved impact safety goggles.

5. Maintain product with care. Inspect parts periodically and, if damaged,

have them repaired by an authorized technician.

6. Replacement parts and accessories. When servicing, use only identical

replacement parts. Use of any other parts will void the warranty. Only use

accessories intended for use with this

ITEM DESCRIPTION

Overall Dimensions 19-1/6”H x 15-1/4” Dia.

Tool Tray 15-1/4” Dia. x 7/8” D x 9/100” Thick

Lifting Plate 1-31/32” Dia. x 7” to 11-5/8”H

Ram Extension 2” Dia. x 7-3/4”H

Handle 5-1/2”L x 1-1/4”W x 5/16” Thick

Hub 1-5/64” I.D. x 1-5/8” H

Supporting Plate 6”L x 5-7/8”W

Casters 2-13/32” Dia. x 3/4”W

Seat 11-1/2” Dia. x 1-5/8” Thick

Material Stamped Steel, Red Vinyl, Foam Rubber

Net Weight 12.35 Lbs.

Weight Capacity 300 Lbs.

tool.

Page 3

Warning: The warnings, cautions, and instructions discussed in this instruction

manual cannot cover all possible conditions and situations that may occur.

It must be understood by the operator that common sense and caution are

factors which cannot be built into this product, but must be supplied by the

operator.

Unpacking

Assembly

NOTE: You will need a crescent wrench to assemble this product.

Place the Tool Tray (E) on a ﬂat level surface.

2. Insert the large end of the Lifting Pole (D) into the round opening in the

center of the Tool Tray.

3. Place the Seat (A) over the top end of the Lifting Pole (D). See page 4,

Assembly Drawing and Parts List.

Operation/Maintenance/Additional Safety Warnings

With its convenient tool tray, comfortable padded seat, and non-marking 1.

wheels, the Pneumatic Roller Seat is essential for the multi-tasking crafts

person.

To lower seat, sit on the Stool and pull up on the handle until you have 2.

lowered the seat to the desired height (See Diagram I on Page 4). To raise

seat, stand next to the Stool and pull up on the handle. Release handle when

seat has risen to the desired height.

Operate on a smooth, level ﬂoor capable of supporting the seat’s capacity.3.

Do not let children play on or around the Roller Seat. 4.

Do not stand on Roller Seat or use the tool tray to carry large amounts of 5.

weight. Do not attempt to exceed the Roller Seat’s 300 lb capacity.

Once assembled, do not attempt to take this product apart.6.

Do not expose to heat. Parts of this product are under pressure.7.

Always hold onto seat as you sit down to keep the seat from rolling or tipping.8.

When unpacking,check to make sure all parts listed on Page 4 are included.

Page 4

Parts List Assembly Drawing

NOTE: Some parts are listed and shown for illustration purposes only and are not available

individually as replacement parts.

Diagram I, Lowering Seat

PLEASE READ THE FOLLOWING CAREFULLY

THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS DIAGRAM

IN THIS MANUAL AS A REFERENCE TOOL ONLY. NEITHER THE MANUFACTURER NOR

DISTRIBUTOR MAKES ANY REPRESENTATION OR WARRANTY OF ANY KIND TO THE

BUYER THAT HE OR SHE IS QUALIFIED TO MAKE ANY REPAIRS TO THE PRODUCT OR

THAT HE OR SHE IS QUALIFIED TO REPLACE ANY PARTS OF THE PRODUCT. IN FACT,

THE MANUFACTURER AND/OR DISTRIBUTOR EXPRESSLY STATES THAT ALL REPAIRS

AND PARTS REPLACEMENTS SHOULD BE UNDERTAKEN BY CERTIFIED AND LICENSED

TECHNICIANS AND NOT BY THE BUYER. THE BUYER ASSUMES ALL RISK AND LIABILITY

ARISING OUT OF HIS OR HER REPAIRS TO THE ORIGINAL PRODUCT OR REPLACEMENT

PARTS THERETO, OR ARISING OUT OF HIS OR HER INSTALLATION OF REPLACEMENT

PARTS THERETO.

NO. DESCRIPTION QTY

A Seat Cushion 1

B Supporting Plate 1

C Hub 1

D Lifting Pole 1

E Tool Tray 1

F 2-1/2” Wheel 5

G Handle 1

H Truss Head Bolt M6x20 4

I Cap Nut 5

J Lock Washer Ø10 5

K Rivet Ø 3 x 18 1

For replacement parts and technical questions, please call 1-800-222-5381.

limited 90 Day Warranty

and durability standards, and warrants to the original purchaser that this product is free from

defects in materials and workmanship for the period of 90 days from the date of purchase.

This warranty does not apply to damage due directly or indirectly, to misuse, abuse, negligence

or accidents, repairs or alterations outside our facilities, criminal activity, improper installation,

normal wear and tear, or to lack of maintenance. We shall in no event be liable for death,

injuries to persons or property, or for incidental, contingent, special or consequential damages

arising from the use of our product. Some states do not allow the exclusion or limitation of

incidental or consequential damages, so the above limitation of exclusion may not apply to you.

THIS WARRANTY IS EXPRESSLY IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR

IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS.

To take advantage of this warranty, the product or part must be returned to us with transportation

charges prepaid. Proof of purchase date and an explanation of the complaint must accompany

the merchandise. If our inspection verifies the defect, we will either repair or replace

the product at our election or we may elect to refund the purchase price if we cannot readily

and quickly provide you with a replacement. We will return repaired products at our expense,

but if we determine there is no defect, or that the defect resulted from causes not within

the scope of our warranty, then you must bear the cost of returning the product.

This warranty gives you specific legal rights and you may also

have other rights which vary from state to state.

Northern Tool + Equipment Co., Inc. makes every effort to assure that its products meet high quality

Distributed by

Northern Tool + Equipment Co., Inc.

Burnsville, Minnesota 55306-6936

NorthernTool.com

Made in China

Page 5

Ironton PSS-01 Owner's manual

Brand: Ironton

Model: PSS-01

Type: Owner's manual

Here are some of the things you can do with the Ironton PSS-01:

Use the tool tray to keep your tools and supplies close at hand.
Adjust the seat height to find the most comfortable and efficient working position.
Use the non-marking wheels to move around easily on a variety of surfaces.

Download PDF

report

Ironton PSS-01 Owner's manual

Ironton PSS-01 Owner's manual

Other documents