2. mater
  3. Canopy Terho Pendant Light

mater Canopy Terho Pendant Light User manual

  • Hello! I've reviewed the user manual for the Mater Canopy. This document provides instructions for installing the canopy, including mounting, cord adjustment, and securing the ceiling cap. I'm ready to answer your questions about the device and the installation process.
  • How many screws and plugs are needed for installation?
    What is the first step in the installation process?
    How to adjust the pendant cord length?
2 x screws
1 x bolt
1 x cord grip
1 x ceiling cap
1 x ceiling bracket
1 x cord grip
sleeve
For this product you will need two screws and two plugs in addition to the
components that are included.
Drill holes and insert wall
plugs and screw the bracket
into the ceiling.
1
Pull the cord grip sleeve
on to the cord as shown.
2
Use the supplied screws
to seal the the ceiling cap
to the bracket mounted
in the ceiling.
5
3
Pull the pendants cord
at the desired lenght,
fix the cord grip sleeve
in place and thighten.
4
Fix the cord grip and bolt on to
the ceiling cap.
Canopy
by Mater
/