Digitus DN-16030 Datasheet

Category
Security cameras
Type
Datasheet

This manual is also suitable for

MPEG-4 (Wireless) Pan/Tilt
Internet Camera
User’s Guide
Version 1.0
1
TABLE OF CONTENTS
ABOUT THIS GUIDE...........................................................3
1. INTRODUCTION..............................................................4
F
EATURES AND BENEFITS .........................................................5
U
NPACKING THE PACKAGE .......................................................7
S
YSTEM REQUIREMENT.............................................................8
P
HYSICAL DESCRIPTION............................................................9
2. HARDWARE INSTALLATION.................................12
A
TTACHING THE
M
ETAL
C
LIP
..................................................12
C
ONNECTING THE ETHERNET CABLE ......................................13
A
TTACHING THE POWER SUPPLY ............................................13
3. SECURITY.........................................................................14
4. APPLICATION OF THE CAMERA.......................15
A
PPLICATION DIAGRAMS OF THE CAMERA.......................................16
5. USING THE CAMERA .................................................19
W
EB CONFIGURATION UTILITY...............................................19
C
ONTROLLING AND VIEWING VIDEO ......................................22
B
ASIC SETUP ...........................................................................24
A
DVANCED SETUP...................................................................29
M
AINTENANCE ........................................................................47
L
OGOUT...................................................................................52
H
ELP........................................................................................53
2
6. FFDSHOW & AVISAVIOR ......................................................54
I
NSTALLING FFDSHOW............................................................54
C
ONFIGURATION OF FFDSHOW ...............................................58
P
LAYING THE VIDEO ...............................................................59
F
IXING THE VIDEO FILE...........................................................60
7. IPVIEW PRO ....................................................................62
I
NSTALLATION.........................................................................62
G
ETTING STARTED ..................................................................66
U
SING IPVIEW PRO .................................................................69
C
ONFIGURING THE SYSTEM.....................................................74
8. APPENDIX.........................................................................88
A.
FREQUENTLY ASKED QUESTIONS.......................................88
B.
PING YOUR IP ADDRESS....................................................91
C.
TROUBLE SHOOTING...........................................................92
D.
TIME ZONE TABLE..............................................................96
E.
ADJUST INTERNET CAMERA FOCUS....................................98
F.
SPECIFICATION ....................................................................99
G.
GLOSSARY OF TERMS .......................................................101
3
ABOUT THIS GUIDE
This manual provides instructions and illustrations on how to use
your MPEG-4 (Wireless) Pan/Tilt Internet Camera, includes:
z Chapter 1, Introduction, provides the general information
on the camera.
z Chapter 2, Hardware Installation, describes the hardware
installation procedure for the camera.
z Chapter 3, Security, explains the security feature of the
camera.
z Chapter 4, Application of the Camera, provides the
illustrations of the camera’s applications.
z Chapter 5, Using the Camera, guides you through the
configuration using the web browser.
z Chapter 6, FFdshow & AVISavior, helps you to use the
utilities provided within the Installation CD.
z Chapter 7, IPView Pro, helps you to install and use the
software.
z Chapter 8, Appendix.
Please note that the illustrations or setting values in this manual
are FOR YOUR REFERENCE ONLY. The actual settings and
values depend on your system and network. If you are not sure
about the respective information, please ask your network
administrator or MIS staff for help.
4
1
INTRODUCTION
Thank you for purchasing the MPEG-4 (Wireless) Pan/Tilt
Internet Camera, a standalone system that can be connected
directly to an Ethernet or Fast Ethernet, and also supported by the
wireless transmission based on the IEEE 802.11g standard*.
With support for latest MPEG-4 technology, you can record
streaming video that utilizes high quality MPEG-4 images to your
hard drive, enable motion detection and setup automated email
alerts for security. The built-in microphone provides you with the
audio function, allowing you to “watch” and “listen” from the
camera. Compared to the conventional PC Camera, the camera
features a built-in CPU and web-based solutions that can provide
a cost-effective solution to transmit the real-time high-quality
video images and sounds synchronously for monitoring.
The camera can be managed remotely, so that you can use a web
browser to access and control it from any notebook/desktop PC
over the Intranet or Internet. The simple installation procedures
and web-based interface allow you to integrate it into your
network easily. With comprehensive applications supported, the
Internet camera is your best solution for remote monitor, high
quality, and high performance video images.
* For wireless model.
5
Features and Benefits
Simple to Use
The MPEG-4 (Wireless) Pan/Tilt Internet Camera is a standalone
system with built-in CPU, no special hardware (such as a PC
frame capture card) or software required. The camera supports
DirectX 9.0; therefore, the only requirement you need is the web
browser software such as Internet Explorer 5.0 or above. Once
you have a valid IP Address, just connect it and you can view the
picture and receive sound from your camera. In addition, the
camera’s stand allows you to adjust the camera for optimal
viewing angle. You can tilt the camera right or left (up to 170/
170 degrees), forward or backward (up to 45/90 degrees).
Support Variety of Platforms
The camera supports TCP/IP networking, SMTP e-mail, HTTP
and other Internet related protocols. It can be utilized in a mixed
operating system environment, including Windows 98SE/ME/
2000/XP. Moreover, it can be integrated easily into other www/
Intranet applications.
Web Configuration
Applying a standard web browser, the administrator can configure
and manage the camera directly from its own web page via the
Intranet or Internet. Up to 64 users name and password are
permitted with privilege setting controlled by the administrator.
6
Remote Utility
The powerful IPView Pro application assigns the administrator
with a pre-defined user ID and password, allowing the
administrator to modify the camera settings from the remote site
via Intranet or Internet. When new firmware is available, you can
also upgrade remotely over the network for added convenience.
Users are also allowed to monitor the image, and take snapshots.
Broad Range of Applications
With today’s high-speed Internet services, the camera can provide
the ideal solution for live video images over the Intranet or
Internet for remote monitoring. The camera allows remote access
from a web browser for live image viewing, and allows the
administrator to manage and control the camera anywhere and
anytime in the world. Apply the camera to monitor various
objects and places such as homes, offices, banks, hospitals, child-
care centers, amusement parks and other varieties of industrial
and public monitoring. The camera can also be used for intruder
detection; in addition, it can capture still images for archiving and
many more applications.
7
Unpacking the Package
Unpack the package and check all the items carefully. In addition
to this User’s Guide, be certain that you have:
One MPEG-4 (Wireless) Pan/Tilt Internet Camera
One External Antenna (for wireless model)
One power adapter
One RJ-45 Ethernet Cable
One Metal Clip
One Installation CD-ROM
One Quick Installation Guide
If any item contained is damaged or missing, please contact your
local dealer immediately. Also, keep the box and packing
materials in case you need to ship the unit in the future.
8
System Requirement
Networking
Local Area Network:
10Base-T Ethernet or 100Base-TX Fast Ethernet
Wireless Local Area Network (wireless model):
IEEE 802.11g Wireless LAN
Accessing the Camera
For Web Browser Users
Operating System: Microsoft® Windows® 98SE/ME/
2000/XP
CPU: Intel Celeron 1.5GHz or above (Intel Pentium 4 is
preferred)
Memory Size: 128MB or above
Resolution: 800x600 or above
Microsoft® Internet Explorer 5.0 or above
For IPView Pro Application Users
Operating System: Microsoft® Windows® 98SE/ME/
2000/XP.
CPU: Intel Celeron 1.5GHz or above (Intel Pentium 4 is
preferred)
Memory Size: 128 MB or above
Resolution: 800x600 or above
Physical Description
This section describes the externally visible features of the
camera.
Front Panel
There are two LED indicators on the front panel of the camera:
Power LED and Link LED.
1. Power LED
The Power LED is positioned on the right side of the two LEDs.
A steady light confirms that the camera is powered on.
2. Link LED
The Link LED is positioned on the left side of the two LEDs. A
steady light confirms that the camera has good connection to
LAN connectivity.
Dependent on the data traffic, the LED will begin to flash to
indicate that the camera is receiving/sending data from/to the
network.
3. Internal MIC
The built-in omni-directional microphone allows the camera to
receive sound and voice.
9
Rear Panel
4 Antenna
10
1 DC Power Connector 3 Network Cable Connector
2 Reset Button
1. DC Power Connector
The DC power input connector is located on the camera’s rear
panel, and is labeled DC5V 2.5A with a single jack socket to
supply power to the camera. Power will be generated when the
power supply is connected to a wall outlet.
2. Reset Button
Factory Reset will be initiated when the reset button is pressed
continuously for three seconds; meanwhile, the Link LED lights
up or blinks. Release the reset button and the Link LED will turn
off, indicating that the camera restores the factory default settings.
11
When factory reset is completed, the configuration of camera will
return to the defaults as:
- IP address: 192.168.1.2
- Administrator’s login name: admin
- Password: admin
- Wireless status (for wireless model): disabled
3. Network Cable Connector
The camera’s rear panel features an RJ-45 connector for
connections to 10Base-T Ethernet cabling or 100Base-TX Fast
Ethernet cabling (which should be Category 5 twisted-pair cable).
The port supports the N-Way protocol and “AutoMDIX” function,
allowing the camera to automatically detect or negotiate the
transmission speed of the network.
4. Antenna (for wireless model)
The rotatable external antenna allows you to adjust its position to
obtain the maximum signal.
12
2
HARDWARE
INSTALLATION
Attaching the Metal Clip
Ear
Ear
Screw
Wall screw
Screw
Base of the camera
Wall screw
To attach the metal clip, remove the two rubber pads under the
base of the camera firstly. Place the metal clip onto the camera
base, and align the two holes of metal clip with two screw holes
on the camera base. Then, secure the metal clip with two screws
(provided in the package). There are two ears on each side of the
metal clip, allowing the camera to be mounted on the ceiling or
wall using two wall screws (provided in the package).
Connecting the Ethernet cable
Connect an Ethernet cable to the
network cable connector located
on the camera’s rear panel, and
then attach it to the network.
Attaching the Power Supply
Attach the external power supply to
the DC power input connector located
on camera’s rear panel, and then
connect it to your local power supply.
TIP: You can confirm power source is
supplied from the Power LED on the
camera is illuminated.
13
14
3
SECURITY
To ensure the highest security and prevent unauthorized usage of
the camera the Administrator has the exclusive privilege to access
the System Administration for settings and control requirements
to allow users the level of entry and authorize the privileges for
all users. The camera supports multi-level password protection
and access to the camera is strictly restricted to defined the user
who has a “User Name” and “User Password” that is assigned by
the Administrator.
The administrator can release a public user name and password so
when remote users access the camera they will have the right to
view the image transmitted by the camera.
NOTE: The default settings of Administrator’s login name/password
are admin/admin, which are easily to be known by unauthorized
users. Therefore, it is strongly recommended to change the login
name and password when you are the first time to use the camera.
15
4
APPLICATION OF
THE CAMERA
The camera can be applied in wide variety of applications. With
the built-in CPU, it can work as a standalone system that provides
a web-based solution transmitting high quality video images and
sounds for monitoring purposes. It can be managed remotely,
accessed and controlled from any PC desktop over the Intranet or
Internet via a web browser. With the easy installation procedure,
real-time live images will be available.
The following section will provide the typical applications for the
camera, and also includes some basic knowledge to assist in the
installation and configuration of the camera.
Applications:
Monitoring of local and remote places and objects such as
construction sites, hospitals, amusement parks, schools and
day-care centers through the use of a web browser.
View image from IPView Pro.
Configure the camera to save image or send-mail messages
with a short video clip.
Application Diagrams of the Camera
Home Applications
16
SOHO Applications
17
Enterprise Applications
18
19
5
USING THE CAMERA
You can access and manage the camera through your web
browser. This chapter describes the Web Configuration Utility,
and provides the instructions on using the camera with a web
browser.
Web Configuration Utility
The camera must be configured through its built-in Web-based
Configuration. Whenever you want to configure the camera,
open your web browser (e.g. Internet Explorer in this manual),
and type the default IP address http://192.168.1.2 in the Address
bar and press [Enter]. When the login page appears, type
admin
in the Name and Password box, and then click
Login.
NOTE:
1. Extensive knowledge of LAN will be helpful in setting up the
camera.
2. The computer’s IP address must correspond with the camera’s IP
address in the same segment for the two devices to
communicate.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68
  • Page 69 69
  • Page 70 70
  • Page 71 71
  • Page 72 72
  • Page 73 73
  • Page 74 74
  • Page 75 75
  • Page 76 76
  • Page 77 77
  • Page 78 78
  • Page 79 79
  • Page 80 80
  • Page 81 81
  • Page 82 82
  • Page 83 83
  • Page 84 84
  • Page 85 85
  • Page 86 86
  • Page 87 87
  • Page 88 88
  • Page 89 89
  • Page 90 90
  • Page 91 91
  • Page 92 92
  • Page 93 93
  • Page 94 94
  • Page 95 95
  • Page 96 96
  • Page 97 97
  • Page 98 98
  • Page 99 99
  • Page 100 100
  • Page 101 101
  • Page 102 102
  • Page 103 103
  • Page 104 104
  • Page 105 105
  • Page 106 106
  • Page 107 107
  • Page 108 108
  • Page 109 109
  • Page 110 110
  • Page 111 111
  • Page 112 112

Digitus DN-16030 Datasheet

Category
Security cameras
Type
Datasheet
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI