MULTIMEDIA HEADSET
User Manual
DA-12201
Remove the protective caps and connect the headset’s jack plugs to
your sound card. Make sure that the headphone connector is plugged
into the speaker ourtput jack and the microphone connector is plugged
into the microphone input jack of the sound card.
Before placing the headset on
your head, make sure that the
volume level on the cable
remote control is set to
minimum.
Adjust the length of the headband on both sides of the headset to
suit the size of your head.
Adjust the microphone to a distance of 2 to 3cm from your mouth.
-
1
-
2
-
3
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Other documents
-
AmpliVox S610A User manual
-
AmpliVox SW640 User manual
-
Bose proflight hdst portable Owner's manual
-
Williams Sound TGS SYS A User manual
-
Telex ANRTM 150 User manual
-
ETC VCC-28 Installation guide
-
AmpliVox S805A User manual
-
-
Amazon Renewed CS540-CR User manual
-
Plantronics CS540A User manual