Kingston Technology KHX4300K2/1G Datasheet

Kingston Technology
Brand
Kingston Technology
Model
KHX4300K2/1G
Category
Memory modules
Type
Datasheet

Kingston Technology KHX4300K2/1G is a high-performance memory module kit designed to enhance the performance of your computer system. With a total capacity of 1GB (1024MB), this kit consists of two 512MB DDR533 CL3 SDRAM modules, each featuring sixteen 32M x 8-bit DDR533 SDRAM chips in TSOP packages.

The KHX4300K2/1G operates at a clock cycle time of 4ns (min.) / 10ns (max.) and a row cycle time of 55ns (min.). It supports programmable read latency 3 (clock), programmable burst length (2, 4, 8), and programmable burst type (sequential & interleave). The module also features a high-performance heat spreader to ensure optimal cooling during operation.

Kingston Technology KHX4300K2/1G is a high-performance memory module kit designed to enhance the performance of your computer system. With a total capacity of 1GB (1024MB), this kit consists of two 512MB DDR533 CL3 SDRAM modules, each featuring sixteen 32M x 8-bit DDR533 SDRAM chips in TSOP packages.

The KHX4300K2/1G operates at a clock cycle time of 4ns (min.) / 10ns (max.) and a row cycle time of 55ns (min.). It supports programmable read latency 3 (clock), programmable burst length (2, 4, 8), and programmable burst type (sequential & interleave). The module also features a high-performance heat spreader to ensure optimal cooling during operation.

Memory Module Specification
Document No. 4803843-001.A00
01/07/04
KHX4300K2/1G
1GB (512MB 64M x 64-Bit x 2 pcs.)
PC4300 CL3 184-Pin DIMM Kit
KEYED
Page 1
DESCRIPTION:
Kingston's KHX4300K2/1G is a kit of two 64M x 64-bit (512MB) DDR533 CL3 SDRAM (Synchro-
nous DRAM) memory modules. Total kit capacity is 1GB (1024MB). The components on each module
include sixteen 32M x 8-bit (8M x 8-bit x 4 Bank) DDR533 SDRAM in TSOP packages. Each 184-
pin DIMM uses gold contact fingers and requires +2.7V. The electrical and mechanical specifications
are as follows:
FEATURES:
Power supply : Vdd: 2.7V ± 0.1V, Vddq: 2.7V ± 0.1V
Double-data-rate architecture; two data transfers per clock cycle
Bidirectional data strobe(DQS)
Differential clock inputs(CK and CK)
DLL aligns DQ and DQS transition with CK transition
Programmable Read latency 3 (clock)
Programmable Burst length (2, 4, 8)
Programmable Burst type (sequential & interleave)
Timing Reference: 3-4-4-8-1 at +2.7V
Edge aligned data output, center aligned data input
Auto & Self refresh, 7.8us refresh interval(8K/64ms refresh)
Serial presence detect with EEPROM
High Performance Heat Spreader
PCB : Height 1.250” (31.75mm), double sided component
PERFORMANCE:
Clock Cycle Time (tCK) 4ns (min.) / 10ns (max.)
Row Cycle Time (tRC) 55ns (min.)
Refresh Row Cycle Time (tRFC) 70ns (min.)
Row Active Time (tRAS) 40ns (min.) / 70,000ns (max.)
Power (IDD0) 8.000 W (max. per module)
UL Rating 94 V - 0
Operating Temperature 0
o
C to 70
o
C
Storage Temperature -55
o
C to +125
o
C
Kingston Technology
Document No. 4803843-001.A00 Page 2
MODULE DIMENSIONS:
0.050
0.0078 ±0.006
(0.20 ±0.15)
(1.270)
0.100
(2.50 )
0.250
(6.350)
0.157
(4.00)
0.071
(1.80)
0.039 ± 0.002
(1.000 ± 0.050)
(3.80)
2.175
(6.62)
0.26
0.1496
(3.00)
0.118
(2.00)
0.0787
(4.00)
0.1575
1.200
0.700
0.393
0.000
0.000
2.886
5.250
(30.48)
(17.80)
(10.00)
(00.00)
(73.30)
(133.35)
Units : Inches (Millimeters)
1
(00.00)
All Kingston products are tested to meet our published specifications. Some motherboards or system configurations may not
operate at the published HyperX memory speeds and timing settings. Kingston does not recommend that any user attempt to
run their computers faster than the published speed. Overclocking or modifying your system timing may result in damage to
computer components.
For more information, go to www.kingston.com
1.250
(31.75)
  • Page 1 1
  • Page 2 2

Kingston Technology KHX4300K2/1G Datasheet

Kingston Technology
Brand
Kingston Technology
Model
KHX4300K2/1G
Category
Memory modules
Type
Datasheet

Kingston Technology KHX4300K2/1G is a high-performance memory module kit designed to enhance the performance of your computer system. With a total capacity of 1GB (1024MB), this kit consists of two 512MB DDR533 CL3 SDRAM modules, each featuring sixteen 32M x 8-bit DDR533 SDRAM chips in TSOP packages.

The KHX4300K2/1G operates at a clock cycle time of 4ns (min.) / 10ns (max.) and a row cycle time of 55ns (min.). It supports programmable read latency 3 (clock), programmable burst length (2, 4, 8), and programmable burst type (sequential & interleave). The module also features a high-performance heat spreader to ensure optimal cooling during operation.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents