Directed 528T Installation guide

528T
Directed
Brand
Directed
Model
528T
Category
Motorcycle Accessories
Type
Installation guide
© 2005 Directed Electronics, Inc.N528T 01-05
This special accessory is an adjustable timer with a built-in 15A relay. The ‘pulse’ timer can be triggered by a +
or - pulse, or a change of state (from + to -, or visa-versa) on the stripe wire.
NNoottee::
Do not exceed 15 amp draw with the 528T or damage will occur. If more current is needed,
use the timer with an external 30 amp SPDT relay.
This product has many popular uses by installers of mobile electronics. Some examples include: creating a wait-
to-start trigger for remote starting diesel vehicles that do not have wait to start triggers.
If you need to disconnect a circuit for a certain amount of time so that the alarm does not activate, you can
use the pulse timer’s normally closed circuit. Pulse the strip wire to disconnect the circuit for up to 60-seconds.
528T
ORANGE 87A NORMALLY CLOSED
BROWN 87 NOT USED
YELLOW 30 COMMON
BLUE LOOP
UNCUT = TRIGGER UPON RECEIVING NEGATIVE
CUT = (NOT USED)
BLACK W/STRIPE - NOT USED
BLACK - GROUND
RED - +12 VDC GROUND
ALARM
DOORSWITCH INPUT
DOORSWITCH
528T
ORANGE 87A NOT USED
WAIT TO START NEGAITVE INPUT WIRE (DIESELS)
BROWN 87 NORMALLY OPEN
YELLOW 30 COMMON
BLUE LOOP
UNCUT = TRIGGER UPON RECEIVING NEGATIVE
CUT = (NOT USED)
BLACK W/STRIPE - TRIGGER INPUT
BLACK - GROUND
RED - +12 VDC GROUND
REMOTE START
MODULE
CONNECT YELLOW 30 COMMON TO GROUND
528T
ORANGE 87A NORMALLY CLOSED
BROWN 87 NORMALLY OPEN
YELLOW 30 COMMON
BLUE LOOP
UNCUT = TRIGGER UPON RECEIVING NEGATIVE
CUT = TRIGGER UPON NEGATIVE GOING AWAY
BLACK W/STRIPE - TRIGGER INPUT
BLACK - GROUND
RED - +12 VDC GROUND
528T Pulse Timer
  • Page 1 1

Directed 528T Installation guide

528T
Directed
Brand
Directed
Model
528T
Category
Motorcycle Accessories
Type
Installation guide
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents