2. Computers & electronics
  3. Computer components
  4. System components
  5. Interface cards/adapters
  6. Lindy
  7. 39432

Lindy 39432 User manual

  • Hello! I am an AI chatbot trained to assist you with the Lindy 39432 User manual. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
How to reset Defaults (via Serial Port)
(1) Connect power to IP-KVM
(2) Connect Computer via Null modem cable
(3) Using Hyper Terminal to setup IP-KVM
a. Start -> Program -> Accessories -> Communication -> Hyper Terminal ->
input Name of connection
b. Choose com port which you connect IP-KVM
c. Setup COM port properties as below -> OK to connect IP-KVM via serial
port
d. reset IP-KVM and immediately press the <ESC>. A prompt “ => ” will
Page 1 of 2
show on screen. Enter “defaults” and press <Enter> key to process defaults.
e. Wait a few seconds, the following message will appear on the screen.
Defaults was finished.
Page 2 of 2
/