Zagg ZAGGmate for iPad 1 Owner's manual

Zagg
Brand
Zagg
Model
ZAGGmate for iPad 1
Category
Tablet cases
Type
Owner's manual

This manual is also suitable for

©2005 - 2011 ZAGG Inc. All Rights Reserved.
PATENT PENDING | NASDAQ: ZAGG | MADE IN CHINA
iPad® and Apple® are registered trademarks of Apple, Inc.
ZAGG, invisibleSHIELD, invisibleSHIELD with design, and ZAGGmate,
are trademarks or registered trademarks of ZAGG Inc.
MAKING THE MOST OF
YOUR NEW COMPANION
This device complies with part 15 of the FCC Rules. Operation
is subject to the following two conditions:
1: This device may not cause harmful interference, and
2: This device must accept any interference received, including
interference that may cause undesired operation
P R O T E C T I V E C O V E R
WITH BLUETOOTH KEYBOARD & STAND
NEED MORE HELP? PLEASE SEE OUR FAQ SECTION AT:
www.zaggmate.com/faq
THE iPAD’S PERFECT COMPANION
SEPARATING
1- PLACE THE ZAGGmate VERTICALLY ON A NON-SLIP SURFACE.
WARRANTY REGISTRATION
2- USING TWO HANDS, PLACE ONE HAND ON EACH SIDE OF THE
ZAGGmate, WITH THUMBS SITUATED JUST ABOVE THE 30-PIN
CHARGING PORT, OR THE SIDE WITH KEYBOARD CUTOUT.
* MAKE SURE THE 30-PIN PORT IS ALIGNED WITH THE CUTOUT
WHEN CLOSING.
3- SECURE THE ZAGGmate WITH ONE THUMB AND THE iPAD®
WITH YOUR OTHER THUMB. APPLY SLIGHT DOWNWARD
PRESSURE TO iPAD® AND SEPARATE.
30-PIN
CHARGING PORT
KEYBOARD
CUTOUT
YOUR ZAGGmate™ COMES WITH A 1 YEAR MANUFACTURER’S
WARRANTY. YOU MUST REGISTER YOUR ZAGGmate AND
KEEP YOUR RECEIPT OF PURCHASE TO ACTIVATE THE
WARRANTY. IF YOU PURCHASED ON ZAGG.COM, ZAGG HAS
ALREADY REGISTERED YOUR ZAGGmate AND HAS YOUR
PROOF OF PURCHASE.
1- ON THE ZAGGmate, SLIDE THE POWER BUTTON ON. THE RED
STATUS LIGHT WILL ILLUMINATE FOR FOUR SECONDS AND
THEN TURN OFF TO SAVE POWER. YOUR ZAGGmate IS
STILL ON.
2- CLICK ON THE BLUETOOTH BUTTON WITH A FINGERNAIL OR
POINTED SHARP OBJECT.
NOTE: THE STATUS LIGHT WILL ILLUMINATE FOR 4 SECONDS
AND THEN GO DARK TO SAVE BATTERY POWER.
3- ON THE iPAD®, SELECT:
SETTINGS > GENERAL > BLUETOOTH > ON.
4- THE STATUS LIGHT WILL FLASH ON ZAGGmate AND THE iPAD®
WILL DISPLAY “ZAGGmate” AS AN AVAILABLE DEVICE.
5- SELECT “ZAGGmate” ON THE iPAD®; THE iPAD® WILL
DISPLAY A CODE.
6- TYPE THE CODE ON ZAGGmate KEYBOARD AND PRESS ENTER;
ZAGGmate WILL NOW BE PAIRED TO THE iPAD®.
THE ZAGGmate’s BLUETOOTH KEYBOARD SHOULD ONLY
NEED TO PAIR TO YOUR iPAD® ONCE AS FOLLOWS:
YOUR ZAGGmate COMES WITH A CHARGING CABLE THAT
PLUGS INTO THE SIDE OF THE DEVICE. YOU MAY PLUG THE
OTHER END OF THE CHARGING CABLE INTO ANY USB
OUTLET, INCLUDING THE FOLLOWING: A COMPUTER, YOUR
iPAD® CHARGER, A ZAGGsparq™, ETC. A COMPLETE CHARGE
TAKES 2-4 HOURS.
POSITIONING
CHARGING
1- LIFT HINGE AND LOCK INTO PLACE
BY SLIDING TAB BACK INTO LOCKING
SLOTS AND APPLYING SLIGHT
PRESSURE.
2- PLACE iPAD®(EITHER IN PORTRAIT
OR LANDSCAPE MODE)
INTO CENTRAL GROOVE, AND
REST AGAINST RAISED HINGE.
CENTRAL GROOVE
RAISED
HINGE
CHARGING
PORT
POWERING ON AND PAIRING YOUR ZAGGmate
SPECIAL FUNCTION KEYS
LIGHTS AND BUTTONS
THE ZAGGmate HAS BEEN DESIGNED WITH SPECIAL
FUNCTION KEYS TO GIVE YOU MORE CONTROL OF YOUR iPAD®.
HOME BUTTON
-BRINGS YOU TO THE iPAD® HOME SCREEN
SEARCH
-BRINGS UP THE iPAD® SEARCH SCREEN
SLIDE-SHOW
-STARTS PLAYING SLIDE-SHOW OF SAVED PICTURES
KEYBOARD HIDE/ SHOW
-ALLOWS YOU TO HIDE OR SHOW iPAD®
ON SCREEN KEYBOARD
BLACK SCREEN
-MAKES THE iPAD® SCREEN GO DARK AND COME
BACK WHEN PRESSED AGAIN
PREVIOUS TRACK
-SKIPS TO PREVIOUS TRACK ON CURRENT PLAYLIST
PLAY/PAUSE
-STARTS OR STOPS CURRENT PLAYLIST
NEXT TRACK
-SKIPS TO NEXT TRACK ON CURRENT PLAYLIST
MUTE
-MUTES AUDIO ON iPAD®
VOLUME DOWN
-DECREASES VOLUME ON iPAD®
VOLUME UP
-INCREASES VOLUME ON iPAD®
BLUETOOTH BUTTON
STATUS LIGHT
CHARGING LIGHT
CHARGING LIGHT (BLUE): TURNS ON WHEN CHARGING,
TURNS OFF WHEN FULLY CHARGED
STATUS LIGHT (RED):
1- FLASHES WHEN BATTERY IS LOW (APPROXIMATELY
20% IS REMAINING. THIS SHOULD GIVE YOU 2-4
DAYS TO RECHARGE)
2- FLASHES WHEN PAIRING
3- LIGHTS BRIEFLY WHEN YOU TURN ON ZAGGmate,
THEN TURNS OFF TO SAVE BATTERY
BATTERY
ZAGGmate’s LONG-LIFE BATTERY LASTS FOR SEVERAL WEEKS
OF NORMAL USE. THE ZAGGmate WILL GO INTO SLEEP MODE
IF LEFT ON AND NOT BEING USED; PRESS ANY KEY AND WAIT
A SECOND OR TWO TO BRING IT OUT OF SLEEP MODE.
THE LITHIUM-POLYMER BATTERY IN THE ZAGGmate HAS
NO MEMORY EFFECT AND MAY BE CHARGED WHENEVER
YOU WISH.
WHEN NOT IN USE FOR A PROLONGED PERIOD, IT IS
RECOMMENDED THAT YOU TURN OFF THE KEYBOARD TO
LENGTHEN BATTERY LIFE.
PLEASE NOTE: THE ZAGGmate IS MADE FROM AIRCRAFT
ALUMINUM WITH A HIGH-GRADE FINISH SIMILAR TO THE
FINISH ON MANY POPULAR DEVICES.
OPTIONAL: A SET OF FOUR RUBBER FEET IS INCLUDED
THAT CAN BE PLACED ON EACH CORNER TO HELP PREVENT
SCRATCHING THE ZAGGmate’s HIGH-GRADE FINISH.
FOR UNPARALLELED SCRATCH PROTECTION,
WE RECOMMEND ZAGG'S invisibleSHIELD® OR ZAGGskins™.
w w w . Z A G G . c o m
13- IF YOU STILL CAN’T GET YOUR ZAGGmate TO PAIR, IT IS
POSSIBLE YOUR iPAD® NEEDS TO HAVE ITS SOFTWARE
UPDATED.
TO UPDATE YOUR iPAD® SOFTWARE, FOLLOW THESE STEPS:
A- PLUG YOUR iPAD® INTO YOUR COMPUTER.
B- OPEN iTUNES
C- SELECT YOUR iPAD® IN THE LEFT HAND COLUMN.
D- CHOOSE THE BUTTON IN THE MIDDLE OF THE SCREEN
TO CHECK FOR SOFTWARE UPDATE.
E- IF AN UPDATE IS AVAILABLE, PLEASE INSTALL IT. THIS
WILL TAKE A FEW MINUTES TO DOWNLOAD
FROM APPLE®.
F- AFTER INSTALLATION IS COMPLETE, RESTART YOUR
iPAD® AND TROUBLESHOOTING LIST.
*** IF YOU RECEIVE THE SAME ERROR MESSAGE DURING
PAIRING, IMMEDIATELY AFTER YOU PRESS ENTER, YOU MAY
HAVE A PROBLEM WITH YOUR ZAGGmate. PLEASE CONTACT
CUSTOMER SUPPORT AT ZAGG.COM TO RESOLVE THE PROBLEM.
NEED MORE HELP? PLEASE SEE OUR FAQ SECTION AT:
www.zaggmate.com/faq
TROUBLESHOOTING
WHAT TO DO IF THE iPAD® DOES NOT RESPOND TO THE ZAGGmate.
A FEW THINGS CAN CAUSE THIS PROBLEM:
-DEAD BATTERY
-NEED TO PAIR THE ZAGGmate TO YOUR iPAD® AGAIN
-OLD iPAD® SOFTWARE
-PROBLEM WITH ZAGGmate
PLEASE FOLLOW THE LIST BELOW TO FIND THE PROBLEM AND
APPROPRIATE SOLUTION.
HOW TO PAIR THE ZAGGmate AGAIN:
1- RESTART YOUR iPAD® BY HOLDING DOWN THE HOME AND
POWER BUTTON SIMULTANEOUSLY UNTIL IT RESETS. LET
GO OF THE BUTTONS WHEN YOU SEE THE APPLE® LOGO.
2- TURN OFF ZAGGmate.
3- TURN THE ZAGGmate ON. YOU SHOULD SEE THE STATUS
LIGHT TURN ON FOR ABOUT 4 SECONDS AND THEN TURN
OFF. IF NOT, CHARGE YOUR ZAGGmate.
4- AFTER CHARGING, SLIDE THE POWER SWITCH ON. IF THE
STATUS LIGHT DOES NOT ILLUMINATE FOR A FEW SECONDS
AND GO DIM, YOU MAY HAVE A PROBLEM WITH YOUR
ZAGGmate. PLEASE CONTACT CUSTOMER SUPPORT AT
ZAGG.COM TO RESOLVE THIS PROBLEM.
5- ON THE iPAD®, SELECT:
SETTINGS > GENERAL > BLUETOOTH > ON.
6- IF YOU SEE ZAGGmate LISTED AS AN “AVAILABLE DEVICE”
ON YOUR iPAD®, CLICK ON THE ARROW TO THE RIGHT AND
CHOOSE TO HAVE YOUR iPAD® “FORGET THE DEVICE.”
7- CLICK BLUETOOTH BUTTON ON ZAGGmate AND WATCH
FOR THE STATUS LIGHT TO FLASH.
8- YOU SHOULD SEE ZAGGmate LISTED AS AN
“AVAILABLE DEVICE.”
9- SELECT ZAGGmate BY TOUCHING IT ON YOUR iPAD®.
10- YOUR iPAD® WILL GIVE YOU A CODE. ENTER THE CODE
USING YOUR ZAGGmate KEYBOARD AND PRESS ENTER.
11- YOUR ZAGGmate SHOULD NOW BE PAIRED.
12- IF YOUR iPAD® GIVES YOU AN ERROR MESSAGE,
REPEAT PROCESS AGAIN.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4

Zagg ZAGGmate for iPad 1 Owner's manual

Zagg
Brand
Zagg
Model
ZAGGmate for iPad 1
Category
Tablet cases
Type
Owner's manual
This manual is also suitable for
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents