Russell Hobbs 20460-70 Owner's manual

Page is loading ...

2

Read the instructions, keep them safe, pass them on if you pass the appliance on. Remove all

packaging before use.

A IMPORTANT SAFEGUARDS

Follow basic safety precautions, including:

1 This appliance can be used by children aged from 8 years and

above and persons with reduced physical, sensory or mental

capabilities or lack of experience and knowledge if they have been

supervised/instructed and understand the hazards involved.

•Children shall not play with the appliance.

•Cleaning and user maintenance shall not be done by children

unless they are older than 8 and supervised.

•Keep the appliance and cable out of reach of children under 8

years.

2 If you overﬁll, the kettle may spit boiling water.

3 Use the kettle only with the stand supplied (and vice versa).

4 If the cable is damaged, it must be replaced by the manufacturer,

its service agent, or someone similarly qualiﬁed, to avoid hazard.

¬ The surfaces of the appliance will get hot.

H Don’t put the kettle, stand, cable, or plug in any liquid.

5 Keep the kettle, stand, and cable away from the edges of worktops.

6 Don’t use the kettle for any purpose other than heating water.

7 Don’t operate the appliance if it’s damaged or malfunctions.

household use only

C FILLING

1 Press the lid lock to open the lid.

2 Fill with at least 1 cup of water, but not above max.

1

2

3

1

0

1

(235ml)

2

(470ml)

3

(705ml)

max

–max –

3

4

5

6

7

1

2

1

8

9

3

3 If you want to boil only 1, 2, or 3 cups of water, ﬁll to the 1, 2, or 3 marks inside the kettle.

4 Close the lid, and press down to lock it.

C SWITCHING ON

5 Put the stand on a stable, level surface.

6 Plug the stand into the wall socket.

7 Put the kettle on the stand.

8 Move the switch to 1. The light will glow.

C SWITCHING OFF

9 When the water boils the kettle will switch oﬀ.

10 To switch oﬀ, move the switch to 0, or lift the kettle oﬀ the stand.

C GENERAL

11 When you lift the kettle, you may see moisture on the stand. Don’t worry – it’s the steam

used to switch oﬀ automatically, which then condenses and escapes via vents under the

kettle.

12 You may see some discolouration on the ﬂoor of the kettle. Again, don’t worry – it’s due to

the bonding of the element to the kettle ﬂoor.

F USING WITH INSUFFICIENT WATER

13 This will shorten the life of the element. A boil-dry cut-out will switch the kettle oﬀ.

14 You must then remove the kettle from its stand to reset the cut-out.

15 Sit the kettle on the work surface till it’s cold.

C CARE AND MAINTENANCE

16 Unplug the stand, and let the kettle cool before cleaning.

17 Wipe all surfaces with a clean damp cloth.

18 Open the lid.

19 Push the hook on top of the ﬁlter down, then lift the ﬁlter out of the kettle.

20 Rinse the ﬁlter under a running tap while brushing with a soft brush.

21 Lower the ﬁlter into the kettle, and engage the bottom hook in the bottom of the spout.

22 Press the top of the ﬁlter towards the kettle, to lock the hook in place.

Descale regularly, (at least monthly).

23 Descale the appliance at least monthly with a proprietary descaler. Follow the instructions on

the package of descaler.

, Products returned under guarantee with faults due to scale will be subject to a repair charge.

z THE SUPPRESSOR

24 The suppressor is designed to reduce the noise made by the boiling water.

25 Scale will prevent it from working, and the kettle will become noisier.

W

ENVIRONMENTAL PROTECTION

To avoid environmental and health problems due to hazardous substances in electrical and

electronic goods, appliances marked with this symbol mustn’t be disposed of with unsorted

municipal waste, but recovered, reused, or recycled.

diagrams

1 hook

2 ﬁlter

3 lid

4 lid lock

5 handle

6 switch

7 suppressor

8 stand

9 light

instructions

Page is loading ...

Russell Hobbs 20460-70 Owner's manual

This manual is also suitable for

Russell Hobbs 20460-70 Owner's manual

in other languages

Related papers

Other documents