SICK KTS Core EasyTeach Quickstart
- Category
- Convenience lighting
- Type
- Quickstart
SICK KTS Core EasyTeach is a sensor that can detect objects by evaluating the contrast between an object and its background. It is equipped with LEDs and meets the criteria of risk group 0 according to IEC 62471:2006, meaning no special measures are required for eye protection. The sensor has a 4-pin standard electrical connection and can be mounted using a fixing hole. It has a bar graph display, a teach-in button, and three LEDs that serve as status indicators. The teach-in process is dynamic, meaning that the sensor can be taught while the object is moving.
SICK KTS Core EasyTeach is a sensor that can detect objects by evaluating the contrast between an object and its background. It is equipped with LEDs and meets the criteria of risk group 0 according to IEC 62471:2006, meaning no special measures are required for eye protection. The sensor has a 4-pin standard electrical connection and can be mounted using a fixing hole. It has a bar graph display, a teach-in button, and three LEDs that serve as status indicators. The teach-in process is dynamic, meaning that the sensor can be taught while the object is moving.
SICK AG
Erwin-Sick-Straße 1
D-79183 Waldkirch
www.sick.com
8021266.ZMT3 / 17.07.2017
Quickstart
KTS Core EasyTeach
en
These instructions are only valid in connection with the (8021268) operating
instructions. You can nd the operating instructions under www.sick.com.
a The KTS sensor is equipped with LEDs. The sensor meets the criteria of risk group 0 accor-
ding to IEC 62471:2006. No special measures are required (e.g. eye protection).
de
Diese Anleitung ist ausschließlich in Verbindung mit der Betriebsanleitung
(8021268) gültig. Die Betriebsanleitung nden Sie unter www.sick.com.
a Der KTS-Sensor ist mit LEDs ausgestattet. Der Sensor entspricht der Risikogruppe 0
gemäß IEC 62471:2006. Es müssen keine besonderen Maßnahmen (z. B. zum Schutz der
Augen) vorgenommen werden.
it
Le presenti istruzioni sono valide solo in abbinamento alle istruzioni per l‘uso
(8021268). Le istruzioni per l‘uso sono a disposizione su www.sick.com.
a Il sensore KTS è dotato di LED. Il sensore corrisponde al gruppo di rischio 0 secondo IEC
62471:2006. Non devono essere adottate misure speciali (ad es. per protezione degli
occhi).
fr
Cette notice n‘est valable qu‘avec la notice d‘instruction (8021268). Elle est
disponible sur le site Internet www.sick.com.
a Le capteur KTS est doté de LED. Il correspond au groupe à risque 0 selon la norme CEI
62471:2006. Aucune mesure particulière (comme la protection des yeux) ne doit être
prise.
es
Estas instrucciones solo son válidas junto con las instrucciones de uso
(8021268). Puede encontrar las instrucciones de uso en www.mysick.com.
a El sensor KTS está equipado con indicadores LED. Este sensor se incluye en el grupo de
riesgo 0 según IEC 62471:2006. No es necesario adoptar ningún tipo de medida especial
(p. ej., para proteger los ojos).
zh
本说明书仅在结合使用 (8021268) 操作指南情况下有效。查看操作指南可访问 www.sick.
com 网页。
a KTS 传感器配有 LED。此传感器符合风险组 0（依据 IEC 62471:2006）。不必采取特
别措施（例如为保护眼睛）。
1 Electrical connection (A)
Elektrischer Anschluss Elektrischer Anschluss
Collegamento elettrico Elektrischer Anschluss
Elektrischer Anschluss
Der Anschluss der Sensoren muss spannungsfrei (U
V
= 0 V) erfolgen.
The sensors must be connected in a voltage-free state (U
V
= 0 V).
Il collegamento dei sensori deve avvenire in assenza di tensione (U
V
= 0 V).
Le raccordement des capteurs doit s‘effectuer hors tension (U
V
= 0 V).
Il collegamento dei sensori deve avvenire in assenza di tensione (U
V
= 0 V).
必须在无电压状态 (U
V
= 0 V) 连接传感器。
A Standard 4-Pin
brown
1
-
L+
whit
e
2
-ET
3
blue
-M
4
-Q
black
2-P
L+
ET
M
Q
1
2
3
4
brn
wht
blu
blk
PWR
Q
PWR
Q
PWR
Q
Q
push-pull
(≤ 100 mA)
+ (L+)
Q
‒ (M)
+ (L+)
Q
‒ (M)
2 Control panel (B)
Bedienfeld Panel de control
Pannello di comando
操作面板
Panneau de commande
B Control panel
1 Bar graph
Bargraph
Bar graph
Afcheur bargraph
Indicador de barras
条形光柱
2 Teach-in button
Teach-In Knopf
Pulsante teach-in
Bouton d‘apprentissage
Botón de aprendizaje
示教键
3 LEDs (status indicators)
LEDs (Statusanzeigen)
LED (indicatori di stato)
LED (afchages d‘état)
LED (indicadores de estado)
LED（状态指示灯）
LOCK
>10s
PWRQ
1
23
3 Mounting (C)
Montage Montaje
Montaggio
安装
Montage
en
1 Install sensor and xing hole so that the light spot enters the mark horizontally
and horizontal and vertical movements of the test object can be compensated
for to the highest possible degree. Note sensing range while doing so.
2 Compensate for the vertical and horizontal movements of the test object using
marks of suitable lengths.
3 Ensure that any sensor movement does not affect the sensing range.
de
1 Sensor über Befestigungsbohrung so einbauen, dass Lichteck längs in
Markierung eintritt und Seiten- und Höhenbewegungen des Prüfobjekts best-
möglich ausgeglichen werden. Dabei Tastweite beachten.
2 Seiten- und Höhenbewegungen des Prüfobjektes durch entsprechend lange
Markierungen ausgleichen.
3 Bewegung des Sensors mit Tastweiteneinuss ausschließen.
it
1 Montare il sensore nel foro di ssaggio in modo che il punto luminoso longi-
tudinalmente entri nella marcatura e che i movimenti laterali e verticali siano
compensati nel migliore modo possibile. Attenersi alla distanza di rilevamento.
2 Compensare i movimenti laterali e verticali dell‘oggetto di verica con marca-
ture di lunghezza adeguata.
3 Escludere un possibile movimento del sensore con effetto sulla distanza di
rilevamento.
fr
1 Monter le capteur sur le trou de xation de sorte que le spot lumineux pénètre
dans le repère dans le sens longitudinal et que la compensation des mou-
vements en longueur et en hauteur soit optimale. Tenir compte de la plage de
balayage.
2 Compenser les mouvements en hauteur et en longueur de l‘objet de détection
en procédant aux repérages correspondants.
3 Empêcher tout mouvement du capteur avec le régulateur de détection.
es
1 Sirviéndose del oricio de jación, monte el sensor de tal modo que el spot
8021266.ZMT3 // 17.07.2017
KTS Core EasyTeach | SICK
incida longitudinalmente en la marca y así compensar de la forma más optima
los movimientos laterales y verticales del objeto de comprobación. Para ello,
debe tenerse en cuenta el alcance de detección.
2 Compense los movimientos laterales y verticales del objeto mediante marcas
de longitud apropiada.
3 Asegúrese de que el movimiento del sensor no inuye en el alcance de
detección.
zh
1 通过安装孔安装传感器，使光点顺沿进入标记，并且检查物体在侧向和高度方向的移
动尽可能最佳地获得补偿。在此注意检测距离。
2 通过适当长度的标记对检查物体在侧向和高度方向的移动进行补偿。
3 确保传感器的移动不会对检测距离产生影响。I
C Mounting
4 Teach-in (dynamisch)
Teach-in (dynamisch) programación (dinámico)
teach-in (dinamico)
示教功能（动态）
apprentissage (dynamique)
LOCK
>10s
PWR Q
LOCK
>10s
PWR Q
LOCK
>10s
PWR Q
TEACH
TEACH
Quality of Teach*
en
Ifnosettingsaremadeonthesensorfor5minutes,Standbymode(bargrapho)isactiva-
ted to save electricity.
Thesettingsmade-andnotconrmedviatheSETbutton-arenotsaved.Toendstandby
mode, one of the operating keys must be pushed.
de
Wenn am Sensor 5 Minuten lang keine Einstellungen gemacht werden, wird der Stand-
by-Modus (Bargraph aus) aktiviert, um Strom zu sparen.
Die vorgenommenen – und nicht über die SET-Taste bestätigten – Einstellungen werden
nicht gespeichert. Um den Standby-Modus zu beenden, muss eine der Bedientasten
betätigt werden.
it
Se per 5 minuti non vengono eseguite impostazioni nel sensore, si attiva la modalità
standby(bargrapho)perrisparmiarecorrente.
Le impostazioni eseguite, ma non confermate tramite il tasto SET, non sono memorizzate.
Per uscire dalla modalità standby deve essere azionato un tasto di comando.
fr
Enl‘absencederéglageducapteurpendant5minutes,lemodeStandby(acheur
bargraph éteint) est activé pour économiser du courant.
Lesréglageseectués,maisnonconrmésaveclatoucheSET,nesontpasenregistrés.
Pour quitter le mode Standby, actionner l‘une des touches de commande.
es
Si no se hace ningún ajuste en el sensor durante 5 minutos, se activa el modo standby
(grácodebarrasapagado)paraahorrarenergía.
LosajustesrealizadosquenosehayanconrmadomediantelateclaSETnoseguardan.
Paranalizarelmododeespera,debeaccionarseunadelasteclasdemando.
zh
如果 5 分钟未对传感器进行设置，则会激活待机模式（条状显示图关闭），以节省用
电。
未通过设置键确认的所做设置不会被保存。要结束待机模式，必须按下其中一个操作
按键。
5 Fault diagnosis
Fehlerdiagnose Diagnóstico de fallos
Diagnostica errori
故障诊断
Diagnostic
en
Display, error situation Cause Measure
– Bar graph display (green)
ashes
– Q-LED (yellow) ashes
– Short-circuit message /
overcurrent
– Sensor is not connected
properly
– Disconnect sensor from
the power network
– Check pin assignment
– Reconnect sensor
– Check the current at the
switching output
– After the teach process,
TEACH-LED (yellow) and
Q-LED (yellow) ash
– Bar graph display (green)
ashes
– No switching output for
object detection
Programmed contrast or
contrast dierence is not
sucient for stable contrast
detection
– Clean sensor
– Readjust sensor
– Check application
conditions
– Restart teach process
de
Anzeige, Fehlerbild Ursache Maßnahme
– Bargraphanzeige (grün)
blinkt
– Q-LED (gelb) blinkt
– Kurzschlussmeldung /
Überstrom
– Sensor ist nicht korrekt
angeschlossen
– Sensor vom Stromnetz
trennen
– Pin-Belegung prüfen
– Sensor erneut
anschließen
– Strom am Schaltaus-
gang prüfen
– Nach dem Teachvorgang
TEACH-LED (gelb) Q-LED
(gelb) blinken
– Bargraphanzeige (grün)
blinkt
– Kein Schaltausgang bei
Objektdetektion
Eingelernter Kontrast bzw.
Kontrastunterschied reicht
nicht aus für eine stabile
Kontrasterkennung
– Sensor reinigen
– Sensor neu justieren
– Einsatzbedingungen
prüfen
– Teach-Vorgang erneut
starten
Page is loading ...
KTS Core EasyTeach | SICK
-
1
-
2
-
3
-
4
SICK KTS Core EasyTeach Quickstart
- Category
- Convenience lighting
- Type
- Quickstart
SICK KTS Core EasyTeach is a sensor that can detect objects by evaluating the contrast between an object and its background. It is equipped with LEDs and meets the criteria of risk group 0 according to IEC 62471:2006, meaning no special measures are required for eye protection. The sensor has a 4-pin standard electrical connection and can be mounted using a fixing hole. It has a bar graph display, a teach-in button, and three LEDs that serve as status indicators. The teach-in process is dynamic, meaning that the sensor can be taught while the object is moving.
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
in other languages
- italiano: SICK KTS Core EasyTeach
- français: SICK KTS Core EasyTeach
- español: SICK KTS Core EasyTeach
- Deutsch: SICK KTS Core EasyTeach
Related papers
-
SICK KTS Core 2P EasyTeach Quickstart
-
-
-
-
-
-
SICK KTS Core Operating instructions
-
-
-