Canon imagePROGRAF TX-3000 Owner's manual

Category
Multifunctionals
Type
Owner's manual
Canon : Manuals : imageRUNNER ADVANCE Direct Enlargement Copy
imageRUNNER ADVANCE Direct Enlargement Copy
Table of Contents
1. Overview
2. Settings for Large Format Printer (imagePROGRAF)
Refernece for Magnification
3. Settings for Multifunction Copier (imageRUNNER ADVANCE)
4. Enlarge Printing of Scanned Data
5. If Warning Screen Appears on Web Browser
1. Overview
Without using a computer, you can send an original scanned using a multifunction copier (imageRUNNER
ADVANCE) to perform enlarge printing using a large format printer (imagePROGRAF).
Compatible Models
Large format printer
imagePROGRAF TX series
Multifunction copier
imageRUNNER ADVANCE series
2. Settings for Large Format Printer (imagePROGRAF)
You need to perform settings both on the Remote UI and operation panel on the large function printer
(imagePROGRAF).
Step 1
Enable FTP using Remote UI.
Remote UI is a software that enables you to perform operations, which are usually performed on the printer's operation
panel, using a Web browser over a network.
For more on Remote UI or compatible OS/web browser, refer to printer's manual.
1. Check printer's IP address.
For details, refer to printer's manual.
2. Open web browser on your computer.
3. Enter printer's IP address to access to Remote UI.
Important
If you access to Remote UI for the first time, a message to warn you that the secure connection is not
guaranteed appears on the web browser. Select Continue to this website (for Internet Explorer).
For a web browser other than Internet Explorer, see If Warning Screen Appears on Web Browser.
The following screen appears.
4. If you display Remote UI for the first time, select For secure communication.
Download the root certificate, and then register it.
For details, refer to printer's manual.
Note
Once you register the root certificate to the web browser, this step is not necessary after the next time.
If the root certificate is not registered, a message to warn you that the secure connection is not guaranteed may
appear. However, the message may appear depending on a web browser even after you have registered the
root certificate.
5. Select Log in.
The screen below appears.
6. Enter printer's password.
Ask the administrator for the password.
Note
The printer serial number is used for the password at the time of purchase. Check it using the operation panel of
the printer. For details, refer to printer's manual.
7. Select OK.
8. Select System info and LAN settings on displayed screen.
9. Select LAN settings.
10. Select Other settings.
11. Select Yes.
The screen below appears.
12. Select FTP setting.
13. Select Enable.
The screen below appears.
14. Select Use authentication check box and Set/change password check box, and then enter user name and
password.
The user name and password you enter in this step are used for FTP authentication. You can use this function when
they match with those you enter on "5. Enter setting items.
" in
Step 1
under "3. Settings for Multifunction Copier
(imageRUNNER ADVANCE)".
15. Select OK.
Please wait a while. appears and returns to the startup screen.
16. Close web browser.
Step 2
Perform enlarge settings on the operation panel of the printer.
1. Select Device settings on HOME screen.
For more on the HOME screen operation, refer to printer's manual.
The Device settings screen appears.
2. Select Print settings.
3. Select Direct print settings from FTP.
4. Perform enlarge print settings on Direct print settings from FTP screen.
You can specify four print settings individually.
The print setting number you selected in this step is used when you perform settings to specify the destination for
your multifunction copier (imageRUNNER ADVANCE).
Example 1: To print A4 sized original enlarged on A1 sized paper
1. Select Print settings 1.
2. Select Paper settings.
3. Select Enlarge/Reduce.
4. Select Scaling.
5. Tap A on the displayed screen.
6. Enter "283" and select OK.
See the following table for the value (magnification) to enter.
Reference for Magnification
ISO A format
Original size
A4 A3
Output size
A4 71 %
A3 141 %
A2 200 % 141 %
A1 283 % 200 %
A0 400 % 283 %
ANSI format
Original size
Letter
8.5" x 11"
Legal
8.5" x 14"
Ledger
11" x 17"
Output size
C 200 % 157 % 129 %
D 258 % 242 % 200 %
E 400 % 314 % 258 %
ARCH format
Original size
A B
Output size
A 66 %
B 133 %
C 200 % 133 %
D 266 % 200 %
E 400 % 266 %
E1 333 % 233 %
7. Select OK on the displayed screen.
Note
Select an image quality in Print quality settings as necessary.
You can specify the orientation of the image from Rotate.
Example 2: To print an original enlarged to fit in the loaded roll paper
1. Select Print settings 2.
2. Select Paper settings.
3. Select Enlarge/Reduce.
4. Select Fit paper size.
The original is printed so that it fits in the paper size specified in Paper src.
Note
Select an image quality in Print quality settings as necessary.
You can specify the orientation of the image from Rotate.
3. Settings for Multifunction Copier (imageRUNNER ADVANCE)
Perform settings on your multifunction copier (imageRUNNER ADVANCE) to prepare for sending data to the
printer.
Step 1
Specify the destination
1. Select [Scan and Send].
2. Select [New Destination] on displayed screen.
3. Select [File] on displayed screen.
4. Select [FTP] from [Protocol] drop-down list.
5. Enter setting items.
Enter the printer IP address on [Host Name].
Note
We recommend you enter the fixed IP address specified for the printer.
Enter "./folderX" on [Folder Path]. ("X" represents the print setting number specified in the Direct print settings from
FTP screen on the printer.)
Example 1: To print A4 sized original enlarged on A1 sized paper
Enter "./folder1 ".
Example 2: To print an original enlarged to fit in the loaded roll paper
Enter "./folder2 ".
Enter the value specified in the printer on [User Name] and [Password].
6. Select [OK].
Step 2
Specify the scan settings
1. Select [PDF (Compact)].
2. Select [JPEG] for [File Format].
3. Specify the settings as necessary.
Recommended resolution is 300×300dpi.
Press [Options] to select useful scan modes. You can also set combinations of scan modes.
Press or button to display the desired mode.
Step 3
Register favorite settings
1. Select [Favorite Settings].
2. Select [Register] on displayed screen.
3. Select button to register on displayed screen and select [Next].
4. Select [Name].
5. Enter name and select [OK].
Example 1: To print A4 sized original enlarged on A1 sized paper
Enter "A4->A1" here.
Example 2: To print an original enlarged to fit in the loaded roll paper
Enter "Fit to roll" here.
6. Select [Comment].
7. Enter comment and select [OK].
8. Select [OK].
9. Select [Close].
Note
If you want to edit the name or comment for the registered button, select [Rename] and edit the settings as
necessary.
If you set [Show Comments] to [On], the registered comments are displayed.
4. Enlarge Printing of Scanned Data
1. Load a document on platen glass or in feeder of your multifunction copier (imageRUNNER ADVANCE).
2. Select [Scan and Send].
3. Select [Favorite Settings] on displayed screen.
4. Select desired Favorite Settings button.
5. Select [Yes] on displayed screen.
6. Press
(Start).
If you are placing your originals on the platen glass, press
(Start) to scan each original.
7. When scanning is complete, select [Start Sending] on displayed screen.
Scanned originals are sent to the printer and printing starts.
5. If Warning Screen Appears on Web Browser
If you access to Remote UI for the first time, a message to warn you that the secure connection is not guaranteed
appears on the web browser.
If you download and register the root certificate to the web browser, the message screen does not appear after
the next time. For details, refer to printer's manual. However, the message may appear depending on a web
browser even after you have registered the root certificate.
This section describes the measure to take for the following web browsers respectively.
For Internet Explorer:
For Google Chrome:
For Mozilla Firefox:
For Safari:
For Internet Explorer:
1. Select Continue to this website on displayed screen.
The Remote UI screen appears.
For Google Chrome:
1. Select Advanced on displayed screen.
2. Select Proceed to XXX.XXX.XXX.XXX. ("XXX.XXX.XXX.XXX" is printer's IP address.)
The Remote UI screen appears.
For Mozilla Firefox:
1. Select Advanced on displayed screen.
Page top
2. Select Add Exception....
3. Select Confirm Security Exception on displayed screen.
The Remote UI screen appears.
For Safari:
1. Select Continue on displayed screen.
The Remote UI screen appears.
© Canon Inc. 2017
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16

Canon imagePROGRAF TX-3000 Owner's manual

Category
Multifunctionals
Type
Owner's manual

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI