Item # _____________________________________
Quantity ___________________________________
C.S.I. Section 11400
F-40255 – Access – CLA Semi-Auto Wrapping System Page 1 of 2
ACCESS – CLA SEMI-AUTO
WRAPPING SYSTEM
701 S Ridge Avenue, Troy, OH 45374
1-888-4HOBART • www.hobartcorp.com
ACCESS – CLA SEMI-AUTO WRAPPING SYSTEM
CLA SYSTEM DEVICES
❑ CLA2-1 – Compact Label Applier includes the
EPCP mounting hardware (no post)
cables, USB/Power/cat5
❑ EPSA-C – Scale/Conveyor for CLA
❑ EPP-1 – Access Prepack Printer
❑ EPCP-1 – Access Prepack Control Panel
❑ W32-6 – Wrap Station
❑ SP-5 – Sealer Belt Conveyor
❑ RBG-1 – Rotary Bin Conveyor
Specications, Details and Dimensions on Reverse Side.
CLA semi-automatic system pictured
with W32 wrap station, SP-5 sealer belt,
CLA indexer, and Access scale and printer
Reference F-40256 for CLA components and accessories
STANDARD FEATURES
■ Access/CLA system averages 14 packages per
minute
■ Conveyor scale, weighs up to 30 lb. x .01
increments
■ Simple, reliable operation
■ Left to right or right to left congurations
■ Film brake stretches lm reducing lm costs
■ 4-position swivel wand lets you rotate labels in
all four directions
■ Rugged stainless steel construction
■ Easy to clean sanitary design
ACCESSORIES
❑ ACCESS-W3PST – Control panel post and
BRKT-W3. Includes the mounting post and post
hardware to mount to the W32-6.
❑ ACCESS-SPKITF – Heavy duty frame and
sensors for CLA/scale
❑ ACCESS-CLAKIT – Printer mounting adapter.
Only use for eld upgrades for existing Ultima/
CLA systems (units built prior to 31-1374421).
❑ CISCO-PCCB21 – Cisco card bus
❑ BRIDGE-DPAC2A – TCP/IP communication
bridge