Danfoss Plug 027H1196 for ICS3E Installation guide

Danfoss
Brand
Danfoss
Model
Plug 027H1196 for ICS3E
Type
Installation guide
Blændprop til ICS3E
Montering
Skal der være passage for styretryk igennem
en tilslutning, anvendes prop A alene. Skal
passagen lukkes for styretryk, anvendes prop A +
B. Se fig. 1 - 4.
S = serie
P = parallel
Propperne har nøglevidden 32 mm og bør
tilspændes med et moment på 50 Nm (5 kPm).
Reservedele
A+B+101+102. Best.nr. 027H1196
Blanking plug for ICS3E
Fitting
Use plug A in order to create passage for pilot
pressure. Use plugs A and B to close a passage.
See figs. 1 - 4.
S = series
P = parallel
The plugs are 32 mm across spanner flats and
should be tightened to a torque of 50 Nm (37 lb
force ft).
Spare parts
A+B+101+102. Code No. 027H1196
Instructions
Plug 027H1196
for ICS3E
027R9799
027R9799
DKRCI.PI.HS0.C1.52 / 520H4132
© Danfoss A/S (IR/MWA), 02-2010
DANSK
ENGLISH
Fig. 1 Fig. 2 Fig. 3
Fig. 4 Fig. 5
ICS3E
Kurt
M.
Sand
Digitally signed
by Kurt M. Sand
DN: cn=Kurt M.
Sand, o=IR
Market Support,
ou=AC-AKIP,
email=kms@dan
foss.com, c=DK
Date: 2010.02.16
13:35:57 +01'00'
Page is loading ...
  • Page 1 1
  • Page 2 2

Danfoss Plug 027H1196 for ICS3E Installation guide

Danfoss
Brand
Danfoss
Model
Plug 027H1196 for ICS3E
Type
Installation guide
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

in other languages

Related papers